From: "Matthias Wächter" <matthias@waechter.wiz.at>
To: Chris Mason <chris.mason@oracle.com>
Cc: Stephan von Krawczynski <skraw@ithnet.com>, linux-btrfs@vger.kernel.org
Subject: Re: Some very basic questions
Date: Wed, 22 Oct 2008 16:04:10 +0200 [thread overview]
Message-ID: <48FF32DA.2010103@waechter.wiz.at> (raw)
In-Reply-To: <1224683433.6448.36.camel@think.oraclecorp.com>
On 10/22/2008 3:50 PM, Chris Mason wrote:
> Let me reword my answer ;). The next write will always succeed unles=
s
> the drive is out of remapping sectors. If the drive is out, it is on=
ly
> good for reads and holding down paper on your desk.
I have a fairly new SATA disk with about 3000 hours of 24/7 duty
(very light load), 0 remapped sectors and 8 consecutive sectors with
read/write errors. Still, it did not perform remapping facing heavy
writes on the bad sectors. Now what? For whatever reason, remapping
not always works (or mine was produced with a total of zero
remapping sectors=E2=80=A6).
- Matthias
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" =
in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-10-22 14:04 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-21 11:23 Some very basic questions Stephan von Krawczynski
2008-10-21 12:13 ` Andi Kleen
2008-10-21 14:22 ` Stephan von Krawczynski
2008-10-21 15:34 ` jim owens
2008-10-22 11:36 ` Stephan von Krawczynski
2008-10-22 12:15 ` Avi Kivity
2008-10-22 13:03 ` Ric Wheeler
2008-10-22 13:13 ` Chris Mason
2008-10-22 13:16 ` Avi Kivity
2008-10-21 13:20 ` jim owens
2008-10-21 17:01 ` Stephan von Krawczynski
2008-10-21 17:15 ` Christoph Hellwig
2008-10-21 17:31 ` Ric Wheeler
2008-10-22 12:27 ` Stephan von Krawczynski
2008-10-22 13:15 ` Chris Mason
2008-10-22 13:27 ` Ric Wheeler
2008-10-22 14:32 ` Avi Kivity
2008-10-22 14:36 ` Chris Mason
2008-10-22 14:40 ` Avi Kivity
2008-10-22 14:46 ` Ric Wheeler
2008-10-22 14:54 ` Avi Kivity
2008-10-22 15:02 ` Ric Wheeler
2008-10-22 15:13 ` Avi Kivity
2008-10-22 15:25 ` Ric Wheeler
2008-10-22 15:33 ` Chris Mason
2008-10-22 15:43 ` Avi Kivity
2008-10-22 15:54 ` Ric Wheeler
2008-10-22 18:28 ` Avi Kivity
2008-10-22 15:39 ` Avi Kivity
2008-10-22 13:52 ` Stephan von Krawczynski
2008-10-22 15:56 ` Michel Salim
2008-10-22 16:56 ` jim owens
2008-10-23 9:47 ` Stephan von Krawczynski
2008-10-22 11:40 ` Stephan von Krawczynski
2008-10-21 13:59 ` Chris Mason
2008-10-21 16:09 ` Andi Kleen
2008-10-22 11:43 ` Stephan von Krawczynski
2008-10-21 16:27 ` Stephan von Krawczynski
2008-10-21 16:59 ` Andi Kleen
2008-10-22 11:46 ` Stephan von Krawczynski
2008-10-21 17:49 ` Chris Mason
2008-10-22 12:19 ` Stephan von Krawczynski
2008-10-22 12:48 ` Jeff Schroeder
2008-10-22 14:02 ` Stephan von Krawczynski
2008-10-22 13:50 ` Chris Mason
2008-10-22 14:04 ` Matthias Wächter [this message]
2008-10-22 14:32 ` Ric Wheeler
2008-10-22 14:44 ` jim owens
2008-10-24 8:42 ` Chris Samuel
2008-10-24 8:39 ` Chris Samuel
2008-10-21 20:54 ` Eric Anopolsky
2008-10-21 22:18 ` Ric Wheeler
2008-10-22 2:29 ` Eric Anopolsky
2008-10-22 10:42 ` Ric Wheeler
2008-10-22 10:53 ` Tejun Heo
2008-10-22 12:57 ` Ric Wheeler
2008-10-22 12:57 ` Ric Wheeler
2008-10-22 13:15 ` Tejun Heo
2008-10-22 13:19 ` Chris Mason
2008-10-22 13:38 ` Ric Wheeler
2008-10-22 13:59 ` Chris Mason
2008-10-22 14:23 ` Ric Wheeler
2008-10-22 13:23 ` Ric Wheeler
2008-10-22 16:14 ` Tejun Heo
2008-10-22 16:34 ` Ric Wheeler
2008-10-23 3:59 ` Tejun Heo
2008-10-22 18:32 ` Avi Kivity
2008-10-22 19:13 ` jim owens
2008-10-22 19:22 ` Avi Kivity
2008-10-22 19:59 ` Ric Wheeler
2008-10-22 21:31 ` Eric Anopolsky
2008-10-22 21:56 ` Ric Wheeler
-- strict thread matches above, loose matches on Subject: below --
2008-10-21 17:37 calin
2008-10-21 20:08 ` jim owens
2008-10-22 7:15 ` Avi Kivity
2008-10-22 14:13 ` jim owens
2008-10-22 14:25 ` Avi Kivity
2008-10-22 14:35 dbz
2008-10-27 15:43 ` Stephan von Krawczynski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48FF32DA.2010103@waechter.wiz.at \
--to=matthias@waechter.wiz.at \
--cc=chris.mason@oracle.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=skraw@ithnet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox