Linux CAN drivers development
 help / color / mirror / Atom feed
* [PATCH] net: c_can: Add support for DCAN Module RAM Init
@ 2014-04-16 18:29 tthayer
  2014-04-16 18:29 ` [PATCH] net: c_can: Add support for D_CAN module " tthayer
  0 siblings, 1 reply; 4+ messages in thread
From: tthayer @ 2014-04-16 18:29 UTC (permalink / raw)
  To: linux-can, wg, mkl; +Cc: socketcan, anilkumar, tglx, tthayer.linux

This patch adds support for the general DCAN module which has
the RAM Init bit in the CFR register [offset 0x18]. The existing
D_CAN implementation was written for TI which uses a separate
register (outside the D_CAN module) for CAN RAM initialization.
I do not have access to the TI D_CAN implementation so if someone 
can test on that platform, it would be appreciated.

[PATCH] net: c_can: Add support for D_CAN RAM Init bit in D_CAN

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2014-04-17 14:31 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-16 18:29 [PATCH] net: c_can: Add support for DCAN Module RAM Init tthayer
2014-04-16 18:29 ` [PATCH] net: c_can: Add support for D_CAN module " tthayer
2014-04-16 21:13   ` Thomas Gleixner
2014-04-17 14:36     ` Thor Thayer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox