public inbox for linux-clk@vger.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Dmitry Rokosov <ddrokosov@salutedevices.com>
Cc: <neil.armstrong@linaro.org>,  <mturquette@baylibre.com>,
	<sboyd@kernel.org>,  <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>,  <khilman@baylibre.com>,
	<martin.blumenstingl@googlemail.com>,  <jian.hu@amlogic.com>,
	<kernel@sberdevices.ru>,  <rockosov@gmail.com>,
	<linux-amlogic@lists.infradead.org>,  <linux-clk@vger.kernel.org>,
	<devicetree@vger.kernel.org>,  <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH v3 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock
Date: Mon, 10 Jun 2024 12:03:02 +0200	[thread overview]
Message-ID: <1jzfrtp12h.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20240515185103.20256-4-ddrokosov@salutedevices.com> (Dmitry Rokosov's message of "Wed, 15 May 2024 21:47:26 +0300")

On Wed 15 May 2024 at 21:47, Dmitry Rokosov <ddrokosov@salutedevices.com> wrote:

> The 'syspll' PLL, also known as the system PLL, is a general and
> essential PLL responsible for generating the CPU clock frequency.
> With its wide-ranging capabilities, it is designed to accommodate
> frequencies within the range of 768MHz to 1536MHz.
>
> Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
> ---
>  drivers/clk/meson/a1-pll.c | 72 ++++++++++++++++++++++++++++++++++++++
>  drivers/clk/meson/a1-pll.h |  6 ++++
>  2 files changed, 78 insertions(+)
>
> diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
> index 60b2e53e7e51..286e83199d17 100644
> --- a/drivers/clk/meson/a1-pll.c
> +++ b/drivers/clk/meson/a1-pll.c
> @@ -138,6 +138,76 @@ static struct clk_regmap hifi_pll = {
>  	},
>  };
>  
> +static const struct pll_mult_range sys_pll_mult_range = {
> +	.min = 32,
> +	.max = 64,
> +};
> +
> +static const struct reg_sequence sys_pll_init_regs[] = {
> +	{ .reg = ANACTRL_SYSPLL_CTRL1, .def = 0x01800000 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL2, .def = 0x00001100 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL3, .def = 0x10022300 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL4, .def = 0x00300000 },
> +	{ .reg = ANACTRL_SYSPLL_CTRL0, .def = 0x01f18432 },

That last entry is clearly an hard coded rate being poked.
Drop it please

> +};
> +
> +static struct clk_regmap sys_pll = {
> +	.data = &(struct meson_clk_pll_data){
> +		.en = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 28,
> +			.width   = 1,
> +		},
> +		.m = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 0,
> +			.width   = 8,
> +		},
> +		.n = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 10,
> +			.width   = 5,
> +		},
> +		.frac = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL1,
> +			.shift   = 0,
> +			.width   = 19,
> +		},
> +		.l = {
> +			.reg_off = ANACTRL_SYSPLL_STS,
> +			.shift   = 31,
> +			.width   = 1,
> +		},
> +		.current_en = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL0,
> +			.shift   = 26,
> +			.width   = 1,
> +		},
> +		.l_detect = {
> +			.reg_off = ANACTRL_SYSPLL_CTRL2,
> +			.shift   = 6,
> +			.width   = 1,
> +		},
> +		.range = &sys_pll_mult_range,
> +		.init_regs = sys_pll_init_regs,
> +		.init_count = ARRAY_SIZE(sys_pll_init_regs),
> +		/*
> +		 * The sys_pll clock is usually enabled and initialized in the
> +		 * bootloader stage. Additionally, the cpu_clk is connected to
> +		 * sys_pll. As a result, it is not allowed to initialize the
> +		 * cpu_clk again, as doing so would prevent the CPU from
> +		 * executing any instructions.
> +		 */
> +		.flags = CLK_MESON_PLL_NOINIT_ENABLED,
> +	},
> +	.hw.init = &(struct clk_init_data){
> +		.name = "sys_pll",
> +		.ops = &meson_clk_pll_ops,
> +		.parent_names = (const char *[]){ "syspll_in" },
> +		.num_parents = 1,
> +	},
> +};
> +
>  static struct clk_fixed_factor fclk_div2_div = {
>  	.mult = 1,
>  	.div = 2,
> @@ -283,6 +353,7 @@ static struct clk_hw *a1_pll_hw_clks[] = {
>  	[CLKID_FCLK_DIV5]	= &fclk_div5.hw,
>  	[CLKID_FCLK_DIV7]	= &fclk_div7.hw,
>  	[CLKID_HIFI_PLL]	= &hifi_pll.hw,
> +	[CLKID_SYS_PLL]		= &sys_pll.hw,
>  };
>  
>  static struct clk_regmap *const a1_pll_regmaps[] = {
> @@ -293,6 +364,7 @@ static struct clk_regmap *const a1_pll_regmaps[] = {
>  	&fclk_div5,
>  	&fclk_div7,
>  	&hifi_pll,
> +	&sys_pll,
>  };
>  
>  static struct regmap_config a1_pll_regmap_cfg = {
> diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
> index 4be17b2bf383..666d9b2137e9 100644
> --- a/drivers/clk/meson/a1-pll.h
> +++ b/drivers/clk/meson/a1-pll.h
> @@ -18,6 +18,12 @@
>  #define ANACTRL_FIXPLL_CTRL0	0x0
>  #define ANACTRL_FIXPLL_CTRL1	0x4
>  #define ANACTRL_FIXPLL_STS	0x14
> +#define ANACTRL_SYSPLL_CTRL0	0x80
> +#define ANACTRL_SYSPLL_CTRL1	0x84
> +#define ANACTRL_SYSPLL_CTRL2	0x88
> +#define ANACTRL_SYSPLL_CTRL3	0x8c
> +#define ANACTRL_SYSPLL_CTRL4	0x90
> +#define ANACTRL_SYSPLL_STS	0x94
>  #define ANACTRL_HIFIPLL_CTRL0	0xc0
>  #define ANACTRL_HIFIPLL_CTRL1	0xc4
>  #define ANACTRL_HIFIPLL_CTRL2	0xc8

-- 
Jerome

  reply	other threads:[~2024-06-10 10:03 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-05-15 18:47 [PATCH v3 0/7] clk: meson: introduce Amlogic A1 SoC Family CPU clock controller driver Dmitry Rokosov
2024-05-15 18:47 ` [PATCH v3 1/7] clk: meson: add 'NOINIT_ENABLED' flag to eliminate init for enabled PLL Dmitry Rokosov
2024-05-15 18:47 ` [PATCH v3 2/7] dt-bindings: clock: meson: a1: pll: introduce new syspll bindings Dmitry Rokosov
2024-05-20 19:02   ` Rob Herring (Arm)
2024-05-15 18:47 ` [PATCH v3 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock Dmitry Rokosov
2024-06-10 10:03   ` Jerome Brunet [this message]
2024-06-10 13:12     ` Dmitry Rokosov
2024-05-15 18:47 ` [PATCH v3 4/7] dt-bindings: clock: meson: a1: peripherals: support sys_pll input Dmitry Rokosov
2024-05-15 19:00   ` Dmitry Rokosov
2024-05-20 19:18   ` Rob Herring (Arm)
2024-05-15 18:47 ` [PATCH v3 5/7] clk: meson: a1: peripherals: support 'sys_pll_div16' clock as GEN input Dmitry Rokosov
2024-05-15 18:47 ` [PATCH v3 6/7] dt-bindings: clock: meson: add A1 CPU clock controller bindings Dmitry Rokosov
2024-06-10 10:04   ` Jerome Brunet
2024-06-10 11:18     ` Dmitry Rokosov
2024-06-10 11:47       ` Jerome Brunet
2024-06-10 12:48         ` Dmitry Rokosov
2024-06-13  9:03           ` Dmitry Rokosov
2024-05-15 18:47 ` [PATCH v3 7/7] clk: meson: a1: add Amlogic A1 CPU clock controller driver Dmitry Rokosov
2024-06-10 10:06   ` Jerome Brunet
2024-06-10 13:08     ` Dmitry Rokosov
2024-06-10 20:10       ` Dmitry Rokosov
2024-05-28 17:41 ` [PATCH v3 0/7] clk: meson: introduce Amlogic A1 SoC Family " Dmitry Rokosov
2024-06-10 10:13 ` Jerome Brunet
2024-06-10 11:21   ` Dmitry Rokosov
2024-06-10 10:32 ` (subset) " Jerome Brunet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1jzfrtp12h.fsf@starbuckisacylon.baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=ddrokosov@salutedevices.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jian.hu@amlogic.com \
    --cc=kernel@sberdevices.ru \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=rockosov@gmail.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox