From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
To: Alexander Dahl <ada@thorsis.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Srinivas Kandagatla <srini@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks
Date: Sat, 31 Jan 2026 17:51:24 +0200 [thread overview]
Message-ID: <b9de4cf4-c4b8-4f5e-9cd7-16991bda439b@tuxon.dev> (raw)
In-Reply-To: <f406abde-c7d1-4ed6-b7dd-5336956bc795@tuxon.dev>
On 1/31/26 17:47, Claudiu Beznea wrote:
>
>
> On 1/20/26 17:44, Alexander Dahl wrote:
>> The OTPC requires both the peripheral clock through PMC and the main RC
>> oscillator. Seemed to work without explicitly enabling those clocks on
>> sama7g5 before, but did not on sam9x60.
>>
>> Older datasheets were not clear and explicit about this, but recent are,
>> e.g. SAMA7G5 series datasheet (DS60001765B),
>> section 30.4.1 Power Management:
>>
>>> The OTPC is clocked through the Power Management Controller (PMC).
>>> The user must power on the main RC oscillator and enable the
>>> peripheral clock of the OTPC prior to reading or writing the OTP
>>> memory.
>
> As this was not mentioned in the previous datasheet versions, the current driver
> don't handle those clocks, and it probably worked as the clocks were enabled by
> bootloaders, I think the clocks should be marked as required and this patch to
> be propagated as a fix along with fixes on driver and device trees.
Ah, wait, you can't propagate it as a fix as you don't have the necessary clocks
exported in device tree in the older kernels. And you are just handling it in
this series.
>
> I'll let DT binding maintainers for the final decision on this.
>
>>
>> Link: https://lore.kernel.org/linux-clk/ec34efc2-2051-4b8a-
>> b5d8-6e2fd5e08c28@microchip.com/T/#u
>
> Why this link here?
>
>> Signed-off-by: Alexander Dahl <ada@thorsis.com>
>> ---
>>
>> Notes:
>> v3:
>> - Removed clock-names (led to confusion, and not used by the driver anyways)
>> - Removed redundant example
>> v2:
>> - new patch, not present in v1
>>
>> .../devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-
>> otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
>> index 9a7aaf64eef32..847dfb67c6b72 100644
>> --- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
>> +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
>> @@ -29,6 +29,11 @@ properties:
>> reg:
>> maxItems: 1
>> + clocks:
>> + items:
>> + - description: main rc oscillator
>> + - description: otpc peripheral clock
>> +
>> required:
>> - compatible
>> - reg
>> @@ -37,6 +42,8 @@ unevaluatedProperties: false
>> examples:
>> - |
>> + #include <dt-bindings/clock/at91.h>
>> + #include <dt-bindings/clock/microchip,sama7g5-pmc.h>
>> #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
>> otpc: efuse@e8c00000 {
>> @@ -44,6 +51,7 @@ examples:
>> reg = <0xe8c00000 0xec>;
>> #address-cells = <1>;
>> #size-cells = <1>;
>> + clocks = <&pmc PMC_TYPE_CORE SAMA7G5_PMC_MAIN_RC>, <&pmc
>> PMC_TYPE_PERIPHERAL 67>;
>> temperature_calib: calib@1 {
>> reg = <OTP_PKT(1) 76>;
>
next prev parent reply other threads:[~2026-01-31 15:51 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-20 14:37 [PATCH v3 00/19] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 01/19] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 02/19] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-01-22 16:46 ` Rob Herring (Arm)
2026-01-31 15:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 03/19] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-02-09 8:08 ` Alexander Dahl
2026-03-08 16:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 04/19] clk: at91: Use new PMC bindings Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 05/19] clk: at91: sama7d65: Use highest PMC definition as max index Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 06/19] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 07/19] clk: at91: Add peripheral id for OTPC Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 15:44 ` Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 08/19] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-01-20 16:30 ` Rob Herring (Arm)
2026-01-31 15:47 ` Claudiu Beznea
2026-01-31 15:51 ` Claudiu Beznea [this message]
2026-02-20 9:58 ` Alexander Dahl
2026-03-08 16:42 ` Claudiu Beznea
2026-03-08 16:45 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 10/19] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-01-31 15:58 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 11/19] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-01-31 16:00 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 12/19] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2026-01-31 15:53 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 13/19] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-01-31 16:03 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 14/19] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-01-31 16:11 ` Claudiu Beznea
2026-02-20 10:38 ` Alexander Dahl
2026-03-08 16:40 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 15/19] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 16/19] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 17/19] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 18/19] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 19/19] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl
2026-01-22 16:47 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b9de4cf4-c4b8-4f5e-9cd7-16991bda439b@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=robh@kernel.org \
--cc=ryan.wanner@microchip.com \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox