From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
To: Alexander Dahl <ada@thorsis.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>,
Ryan Wanner <ryan.wanner@microchip.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
Srinivas Kandagatla <srini@kernel.org>
Subject: Re: [PATCH v3 13/19] nvmem: microchip-otpc: Enable necessary clocks
Date: Sat, 31 Jan 2026 18:03:28 +0200 [thread overview]
Message-ID: <e0047afc-2109-4062-bc51-045ccd7f868a@tuxon.dev> (raw)
In-Reply-To: <20260120154502.1280938-7-ada@thorsis.com>
On 1/20/26 17:44, Alexander Dahl wrote:
> Without enabling the main rc clock, initializing the packet list leads
> to a read timeout on the first packet, at least on sam9x60.
>
> According to SAM9X60 datasheet (DS60001579G) section "23.4 Product
> Dependencies" the clock must be enabled for reading and writing.
>
> Tested on sam9x60-curiosity board.
>
> Link: https://lore.kernel.org/linux-clk/ec34efc2-2051-4b8a-b5d8-6e2fd5e08c28@microchip.com/T/#u
Why this link here?
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
> ---
>
> Notes:
> v3:
> - Rewrap lines
>
> v2:
> - Rewrite to enable _all_ clocks defined in dts
>
> drivers/nvmem/microchip-otpc.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/nvmem/microchip-otpc.c b/drivers/nvmem/microchip-otpc.c
> index d39f2d57e5f5e..34c0d7611f3e4 100644
> --- a/drivers/nvmem/microchip-otpc.c
> +++ b/drivers/nvmem/microchip-otpc.c
> @@ -8,6 +8,7 @@
> */
>
> #include <linux/bitfield.h>
> +#include <linux/clk.h>
> #include <linux/iopoll.h>
> #include <linux/module.h>
> #include <linux/nvmem-provider.h>
> @@ -241,6 +242,7 @@ static struct nvmem_config mchp_nvmem_config = {
> static int mchp_otpc_probe(struct platform_device *pdev)
> {
> struct nvmem_device *nvmem;
> + struct clk_bulk_data *clks;
> struct mchp_otpc *otpc;
> u32 size;
> int ret;
> @@ -253,6 +255,10 @@ static int mchp_otpc_probe(struct platform_device *pdev)
> if (IS_ERR(otpc->base))
> return PTR_ERR(otpc->base);
>
> + ret = devm_clk_bulk_get_all_enabled(&pdev->dev, &clks);
> + if (ret < 0)
> + return dev_err_probe(&pdev->dev, ret, "Error getting clocks!\n");
> +
> otpc->dev = &pdev->dev;
> ret = mchp_otpc_init_packets_list(otpc, &size);
> if (ret)
next prev parent reply other threads:[~2026-01-31 16:03 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-20 14:37 [PATCH v3 00/19] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 01/19] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 02/19] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-01-22 16:46 ` Rob Herring (Arm)
2026-01-31 15:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 03/19] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-02-09 8:08 ` Alexander Dahl
2026-03-08 16:43 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 04/19] clk: at91: Use new PMC bindings Alexander Dahl
2026-01-31 15:44 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 05/19] clk: at91: sama7d65: Use highest PMC definition as max index Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 06/19] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 07/19] clk: at91: Add peripheral id for OTPC Alexander Dahl
2026-01-31 15:45 ` Claudiu Beznea
2026-01-20 15:44 ` Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 08/19] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-01-20 16:30 ` Rob Herring (Arm)
2026-01-31 15:47 ` Claudiu Beznea
2026-01-31 15:51 ` Claudiu Beznea
2026-02-20 9:58 ` Alexander Dahl
2026-03-08 16:42 ` Claudiu Beznea
2026-03-08 16:45 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 10/19] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-01-31 15:58 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 11/19] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-01-31 16:00 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 12/19] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2026-01-31 15:53 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 13/19] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-01-31 16:03 ` Claudiu Beznea [this message]
2026-01-20 15:44 ` [PATCH v3 14/19] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-01-31 16:11 ` Claudiu Beznea
2026-02-20 10:38 ` Alexander Dahl
2026-03-08 16:40 ` Claudiu Beznea
2026-01-20 15:44 ` [PATCH v3 15/19] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 16/19] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 17/19] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 18/19] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-01-20 15:44 ` [PATCH v3 19/19] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl
2026-01-22 16:47 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e0047afc-2109-4062-bc51-045ccd7f868a@tuxon.dev \
--to=claudiu.beznea@tuxon.dev \
--cc=ada@thorsis.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=ryan.wanner@microchip.com \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox