public inbox for linux-clk@vger.kernel.org
 help / color / mirror / Atom feed
From: Claudiu Beznea <claudiu.beznea@tuxon.dev>
To: Alexander Dahl <ada@thorsis.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ryan Wanner <ryan.wanner@microchip.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	Srinivas Kandagatla <srini@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks
Date: Sat, 31 Jan 2026 17:47:05 +0200	[thread overview]
Message-ID: <f406abde-c7d1-4ed6-b7dd-5336956bc795@tuxon.dev> (raw)
In-Reply-To: <20260120154502.1280938-3-ada@thorsis.com>



On 1/20/26 17:44, Alexander Dahl wrote:
> The OTPC requires both the peripheral clock through PMC and the main RC
> oscillator.  Seemed to work without explicitly enabling those clocks on
> sama7g5 before, but did not on sam9x60.
> 
> Older datasheets were not clear and explicit about this, but recent are,
> e.g. SAMA7G5 series datasheet (DS60001765B),
> section 30.4.1 Power Management:
> 
>> The OTPC is clocked through the Power Management Controller (PMC).
>> The user must power on the main RC oscillator and enable the
>> peripheral clock of the OTPC prior to reading or writing the OTP
>> memory.

As this was not mentioned in the previous datasheet versions, the current driver 
don't handle those clocks, and it probably worked as the clocks were enabled by 
bootloaders, I think the clocks should be marked as required and this patch to 
be propagated as a fix along with fixes on driver and device trees.

I'll let DT binding maintainers for the final decision on this.

> 
> Link: https://lore.kernel.org/linux-clk/ec34efc2-2051-4b8a-b5d8-6e2fd5e08c28@microchip.com/T/#u

Why this link here?

> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> ---
> 
> Notes:
>      v3:
>      - Removed clock-names (led to confusion, and not used by the driver anyways)
>      - Removed redundant example
>      
>      v2:
>      - new patch, not present in v1
> 
>   .../devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
> index 9a7aaf64eef32..847dfb67c6b72 100644
> --- a/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml
> @@ -29,6 +29,11 @@ properties:
>     reg:
>       maxItems: 1
>   
> +  clocks:
> +    items:
> +      - description: main rc oscillator
> +      - description: otpc peripheral clock
> +
>   required:
>     - compatible
>     - reg
> @@ -37,6 +42,8 @@ unevaluatedProperties: false
>   
>   examples:
>     - |
> +    #include <dt-bindings/clock/at91.h>
> +    #include <dt-bindings/clock/microchip,sama7g5-pmc.h>
>       #include <dt-bindings/nvmem/microchip,sama7g5-otpc.h>
>   
>       otpc: efuse@e8c00000 {
> @@ -44,6 +51,7 @@ examples:
>           reg = <0xe8c00000 0xec>;
>           #address-cells = <1>;
>           #size-cells = <1>;
> +        clocks = <&pmc PMC_TYPE_CORE SAMA7G5_PMC_MAIN_RC>, <&pmc PMC_TYPE_PERIPHERAL 67>;
>   
>           temperature_calib: calib@1 {
>               reg = <OTP_PKT(1) 76>;


  parent reply	other threads:[~2026-01-31 15:47 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-01-20 14:37 [PATCH v3 00/19] Microchip OTPC driver on SAM9X60 exposing UIDxR as additional nvmem device Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 01/19] MAINTAINERS: Add sam9/sama to (AT91) SoC support Alexander Dahl
2026-01-20 14:37 ` [PATCH v3 02/19] dt-bindings: clock: at91: Split up per SoC partially Alexander Dahl
2026-01-22 16:46   ` Rob Herring (Arm)
2026-01-31 15:43   ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 03/19] dt-bindings: clock: at91: Allow referencing main rc oscillator in DT Alexander Dahl
2026-01-31 15:44   ` Claudiu Beznea
2026-02-09  8:08     ` Alexander Dahl
2026-03-08 16:43       ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 04/19] clk: at91: Use new PMC bindings Alexander Dahl
2026-01-31 15:44   ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 05/19] clk: at91: sama7d65: Use highest PMC definition as max index Alexander Dahl
2026-01-31 15:45   ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 06/19] clk: at91: Allow enabling main_rc_osc through DT Alexander Dahl
2026-01-31 15:45   ` Claudiu Beznea
2026-01-20 14:37 ` [PATCH v3 07/19] clk: at91: Add peripheral id for OTPC Alexander Dahl
2026-01-31 15:45   ` Claudiu Beznea
2026-01-20 15:44 ` Alexander Dahl
2026-01-20 15:44   ` [PATCH v3 08/19] dt-bindings: nvmem: microchip-otpc: Add compatible for SAM9X60 Alexander Dahl
2026-01-20 15:44   ` [PATCH v3 09/19] dt-bindings: nvmem: microchip-otpc: Add required clocks Alexander Dahl
2026-01-20 16:30     ` Rob Herring (Arm)
2026-01-31 15:47     ` Claudiu Beznea [this message]
2026-01-31 15:51       ` Claudiu Beznea
2026-02-20  9:58       ` Alexander Dahl
2026-03-08 16:42         ` Claudiu Beznea
2026-03-08 16:45           ` Claudiu Beznea
2026-01-20 15:44   ` [PATCH v3 10/19] nvmem: microchip-otpc: Avoid reading a write-only register Alexander Dahl
2026-01-31 15:58     ` Claudiu Beznea
2026-01-20 15:44   ` [PATCH v3 11/19] nvmem: microchip-otpc: Fix swapped 'sleep' and 'timeout' parameters Alexander Dahl
2026-01-31 16:00     ` Claudiu Beznea
2026-01-20 15:44   ` [PATCH v3 12/19] nvmem: microchip-otpc: Add SAM9X60 support Alexander Dahl
2026-01-31 15:53     ` Claudiu Beznea
2026-01-20 15:44   ` [PATCH v3 13/19] nvmem: microchip-otpc: Enable necessary clocks Alexander Dahl
2026-01-31 16:03     ` Claudiu Beznea
2026-01-20 15:44   ` [PATCH v3 14/19] nvmem: microchip-otpc: Expose UID registers as 2nd nvmem device Alexander Dahl
2026-01-31 16:11     ` Claudiu Beznea
2026-02-20 10:38       ` Alexander Dahl
2026-03-08 16:40         ` Claudiu Beznea
2026-01-20 15:44   ` [PATCH v3 15/19] ARM: dts: microchip: Use new PMC bindings Alexander Dahl
2026-01-20 15:44   ` [PATCH v3 16/19] ARM: dts: microchip: sama7g5: Add OTPC clocks Alexander Dahl
2026-01-20 15:44   ` [PATCH v3 17/19] ARM: dts: microchip: sam9x60: Add OTPC node Alexander Dahl
2026-01-20 15:44   ` [PATCH v3 18/19] ARM: dts: microchip: sam9x60_curiosity: Enable OTP Controller Alexander Dahl
2026-01-20 15:44   ` [PATCH v3 19/19] dt-bindings: clock: at91: Remove old PMC definitions Alexander Dahl
2026-01-22 16:47     ` Rob Herring (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f406abde-c7d1-4ed6-b7dd-5336956bc795@tuxon.dev \
    --to=claudiu.beznea@tuxon.dev \
    --cc=ada@thorsis.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=robh@kernel.org \
    --cc=ryan.wanner@microchip.com \
    --cc=srini@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox