From: Huang Ying <ying.huang@intel.com>
To: Dan Williams <dan.j.williams@intel.com>,
Dave Jiang <dave.jiang@intel.com>
Cc: linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org,
Huang Ying <ying.huang@intel.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Jonathan Cameron <jonathan.cameron@huawei.com>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <ira.weiny@intel.com>,
Alejandro Lucero <alucerop@amd.com>
Subject: [RFC 4/5] cxl: Set type of region to that of the first endpoint
Date: Wed, 25 Sep 2024 10:46:46 +0800 [thread overview]
Message-ID: <20240925024647.46735-5-ying.huang@intel.com> (raw)
In-Reply-To: <20240925024647.46735-1-ying.huang@intel.com>
The type of region is hard-coded as type 3 expander now, because this
is the only supported device type. As a preparation to support type 2
accelerators, we set the type of region to that of the first endpoint.
Then, we will check whether the type of region is same as the type of
other endpoints of the region. Because what we really need is to make
sure the type of all endpoints of a region is same.
The target type of endpoint devices comes from expander/accelerator
device drivers via struct cxl_dev_state.
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Alejandro Lucero <alucerop@amd.com>
---
drivers/cxl/acpi.c | 1 -
drivers/cxl/core/hdm.c | 28 +++++++++++++---------------
drivers/cxl/core/port.c | 2 ++
drivers/cxl/core/region.c | 13 +++++++------
drivers/cxl/cxl.h | 1 +
5 files changed, 23 insertions(+), 22 deletions(-)
diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index 21486e471305..29c2a44b122c 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -382,7 +382,6 @@ static int __cxl_parse_cfmws(struct acpi_cedt_cfmws *cfmws,
cxld = &cxlrd->cxlsd.cxld;
cxld->flags = cfmws_to_decoder_flags(cfmws->restrictions);
- cxld->target_type = CXL_DECODER_EXPANDER;
cxld->hpa_range = (struct range) {
.start = cfmws->base_hpa,
.end = cfmws->base_hpa + cfmws->window_size - 1,
diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
index 478fb6691759..c9accf8be71f 100644
--- a/drivers/cxl/core/hdm.c
+++ b/drivers/cxl/core/hdm.c
@@ -841,18 +841,25 @@ static int init_hdm_decoder(struct cxl_port *port, struct cxl_decoder *cxld,
.end = base + size - 1,
};
+ if (cxled) {
+ struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
+ struct cxl_dev_state *cxlds = cxlmd->cxlds;
+
+ if (cxlds->type == CXL_DEVTYPE_CLASSMEM)
+ cxld->target_type = CXL_DECODER_EXPANDER;
+ else
+ cxld->target_type = CXL_DECODER_ACCEL;
+ }
+
/* decoders are enabled if committed */
if (committed) {
cxld->flags |= CXL_DECODER_F_ENABLE;
if (ctrl & CXL_HDM_DECODER0_CTRL_LOCK)
cxld->flags |= CXL_DECODER_F_LOCK;
- if (FIELD_GET(CXL_HDM_DECODER0_CTRL_HOSTONLY, ctrl)) {
- cxld->target_type = CXL_DECODER_EXPANDER;
+ if (FIELD_GET(CXL_HDM_DECODER0_CTRL_HOSTONLY, ctrl))
cxld->coherence = CXL_DECODER_HOSTONLYCOH;
- } else {
- cxld->target_type = CXL_DECODER_ACCEL;
+ else
cxld->coherence = CXL_DECODER_DEVCOH;
- }
guard(rwsem_write)(&cxl_region_rwsem);
if (cxld->id != cxl_num_decoders_committed(port)) {
@@ -874,21 +881,12 @@ static int init_hdm_decoder(struct cxl_port *port, struct cxl_decoder *cxld,
struct cxl_memdev *cxlmd = cxled_to_memdev(cxled);
struct cxl_dev_state *cxlds = cxlmd->cxlds;
- /*
- * Default by devtype until a device arrives that needs
- * more precision.
- */
- if (cxlds->type == CXL_DEVTYPE_CLASSMEM)
- cxld->target_type = CXL_DECODER_EXPANDER;
- else
- cxld->target_type = CXL_DECODER_ACCEL;
if (cxlds->coherence == CXL_DEVCOH_HOSTONLY)
cxld->coherence = CXL_DECODER_HOSTONLYCOH;
else
cxld->coherence = CXL_DECODER_DEVCOH;
} else {
- /* To be overridden by region type/coherence at commit time */
- cxld->target_type = CXL_DECODER_EXPANDER;
+ /* To be overridden by region coherence at commit time */
cxld->coherence = CXL_DECODER_HOSTONLYCOH;
}
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 2dee78e9b90c..5633b7316cb3 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -139,6 +139,8 @@ static ssize_t target_type_show(struct device *dev,
return sysfs_emit(buf, "accelerator\n");
case CXL_DECODER_EXPANDER:
return sysfs_emit(buf, "expander\n");
+ default:
+ break;
}
return -ENXIO;
}
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index cec7d08b6f44..9c68ec445128 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -1926,7 +1926,10 @@ static int cxl_region_attach(struct cxl_region *cxlr,
return -ENXIO;
}
- if (cxled->cxld.target_type != cxlr->type) {
+ /* Set the type of region to that of the first endpoint */
+ if (cxlr->type == CXL_DECODER_INVALID) {
+ cxlr->type = cxled->cxld.target_type;
+ } else if (cxled->cxld.target_type != cxlr->type) {
dev_dbg(&cxlr->dev, "%s:%s type mismatch: %d vs %d\n",
dev_name(&cxlmd->dev), dev_name(&cxled->cxld.dev),
cxled->cxld.target_type, cxlr->type);
@@ -2482,7 +2485,6 @@ static int cxl_region_calculate_adistance(struct notifier_block *nb,
* @cxlrd: root decoder
* @id: memregion id to create, or memregion_free() on failure
* @mode: mode for the endpoint decoders of this region
- * @type: select whether this is an expander or accelerator (type-2 or type-3)
*
* This is the second step of region initialization. Regions exist within an
* address space which is mapped by a @cxlrd.
@@ -2492,8 +2494,7 @@ static int cxl_region_calculate_adistance(struct notifier_block *nb,
*/
static struct cxl_region *devm_cxl_add_region(struct cxl_root_decoder *cxlrd,
int id,
- enum cxl_decoder_mode mode,
- enum cxl_decoder_type type)
+ enum cxl_decoder_mode mode)
{
struct cxl_port *port = to_cxl_port(cxlrd->cxlsd.cxld.dev.parent);
struct cxl_region *cxlr;
@@ -2504,7 +2505,7 @@ static struct cxl_region *devm_cxl_add_region(struct cxl_root_decoder *cxlrd,
if (IS_ERR(cxlr))
return cxlr;
cxlr->mode = mode;
- cxlr->type = type;
+ cxlr->type = CXL_DECODER_INVALID;
dev = &cxlr->dev;
rc = dev_set_name(dev, "region%d", id);
@@ -2576,7 +2577,7 @@ static struct cxl_region *__create_region(struct cxl_root_decoder *cxlrd,
return ERR_PTR(-EBUSY);
}
- return devm_cxl_add_region(cxlrd, id, mode, CXL_DECODER_EXPANDER);
+ return devm_cxl_add_region(cxlrd, id, mode);
}
static ssize_t create_pmem_region_store(struct device *dev,
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index 99398c868d82..2a2d2c483654 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -324,6 +324,7 @@ resource_size_t cxl_rcd_component_reg_phys(struct device *dev,
#define CXL_DECODER_F_MASK GENMASK(5, 0)
enum cxl_decoder_type {
+ CXL_DECODER_INVALID,
CXL_DECODER_ACCEL = 2,
CXL_DECODER_EXPANDER = 3,
};
--
2.39.2
next prev parent reply other threads:[~2024-09-25 2:47 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-25 2:46 [RFC 0/5] cxl: Preparation of type2 accelerators support Huang Ying
2024-09-25 2:46 ` [RFC 1/5] cxl: Rename ACPI_CEDT_CFMWS_RESTRICT_TYPE2/TYPE3 Huang Ying
2024-10-01 2:48 ` Davidlohr Bueso
2024-10-01 13:43 ` Gregory Price
2024-09-25 2:46 ` [RFC 2/5] cxl: Rename CXL_DECODER_HOSTONLYMEM/DEVMEM Huang Ying
2024-10-01 3:01 ` Davidlohr Bueso
2024-10-01 13:45 ` Gregory Price
2024-09-25 2:46 ` [RFC 3/5] cxl: Separate coherence from target type Huang Ying
2024-10-01 13:53 ` Gregory Price
2024-10-02 0:41 ` Huang, Ying
2024-10-11 2:40 ` Huang, Ying
2024-10-02 21:15 ` Ben Cheatham
2024-10-03 1:13 ` Huang, Ying
2024-09-25 2:46 ` Huang Ying [this message]
2024-10-01 13:56 ` [RFC 4/5] cxl: Set type of region to that of the first endpoint Gregory Price
2024-10-02 0:40 ` Huang, Ying
2024-10-02 21:15 ` Ben Cheatham
2024-10-03 1:12 ` Huang, Ying
2024-10-03 14:28 ` Ben Cheatham
2024-09-25 2:46 ` [RFC 5/5] cxl: Avoid to create dax regions for type2 accelerators Huang Ying
2024-10-01 13:57 ` Gregory Price
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240925024647.46735-5-ying.huang@intel.com \
--to=ying.huang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=alucerop@amd.com \
--cc=dan.j.williams@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox