From: Dave Jiang <dave.jiang@intel.com>
To: linux-cxl@vger.kernel.org
Cc: dan.j.williams@intel.com, ira.weiny@intel.com,
vishal.l.verma@intel.com, alison.schofield@intel.com,
Jonathan.Cameron@huawei.com, dave@stgolabs.net, jgg@nvidia.com,
shiju.jose@huawei.com
Subject: [PATCH v1 13/19] cxl: Move cxl feature command structs to user header
Date: Wed, 22 Jan 2025 16:50:44 -0700 [thread overview]
Message-ID: <20250122235159.2716036-14-dave.jiang@intel.com> (raw)
In-Reply-To: <20250122235159.2716036-1-dave.jiang@intel.com>
In perparation for cxl fwctl enabling, move data structures related to
cxl feature commands to a user header file.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
v1:
- Fixup user headers from 0day report
---
include/cxl/features.h | 101 +------------------------------
include/uapi/cxl/features.h | 117 ++++++++++++++++++++++++++++++++++++
2 files changed, 118 insertions(+), 100 deletions(-)
create mode 100644 include/uapi/cxl/features.h
diff --git a/include/cxl/features.h b/include/cxl/features.h
index e38ee777328d..9f234659ca2d 100644
--- a/include/cxl/features.h
+++ b/include/cxl/features.h
@@ -5,6 +5,7 @@
#include <linux/uuid.h>
#include <linux/fwctl.h>
+#include <uapi/cxl/features.h>
#define CXL_FEAT_PATROL_SCRUB_UUID \
UUID_INIT(0x96dad7d6, 0xfde8, 0x482b, 0xa7, 0x33, 0x75, 0x77, 0x4e, \
@@ -47,55 +48,6 @@ struct cxl_features {
};
#define to_cxl_features(dev) container_of(dev, struct cxl_features, dev)
-/* Get Supported Features (0x500h) CXL r3.1 8.2.9.6.1 */
-struct cxl_mbox_get_sup_feats_in {
- __le32 count;
- __le16 start_idx;
- u8 reserved[2];
-} __packed;
-
-/* CXL spec r3.2 Table 8-87 command effects */
-#define CXL_CMD_CONFIG_CHANGE_COLD_RESET BIT(0)
-#define CXL_CMD_CONFIG_CHANGE_IMMEDIATE BIT(1)
-#define CXL_CMD_DATA_CHANGE_IMMEDIATE BIT(2)
-#define CXL_CMD_POLICY_CHANGE_IMMEDIATE BIT(3)
-#define CXL_CMD_LOG_CHANGE_IMMEDIATE BIT(4)
-#define CXL_CMD_SECURITY_STATE_CHANGE BIT(5)
-#define CXL_CMD_BACKGROUND BIT(6)
-#define CXL_CMD_BGCMD_ABORT_SUPPORTED BIT(7)
-#define CXL_CMD_EFFECTS_EXTEND BIT(9)
-#define CXL_CMD_CONFIG_CHANGE_CONV_RESET BIT(10)
-#define CXL_CMD_CONFIG_CHANGE_CXL_RESET BIT(11)
-
-/*
- * CXL spec r3.2 Table 8-109
- * Get Supported Features Supported Feature Entry
- * Atribute Flags
- */
-#define CXL_FEATURE_F_CHANGEABLE BIT(0)
-#define CXL_FEATURE_F_PERSIST_FW_UPDATE BIT(4)
-#define CXL_FEATURE_F_DEFAULT_SEL BIT(5)
-#define CXL_FEATURE_F_SAVED_SEL BIT(6)
-
-struct cxl_feat_entry {
- uuid_t uuid;
- __le16 id;
- __le16 get_feat_size;
- __le16 set_feat_size;
- __le32 flags;
- u8 get_feat_ver;
- u8 set_feat_ver;
- __le16 effects;
- u8 reserved[18];
-} __packed;
-
-struct cxl_mbox_get_sup_feats_out {
- __le16 num_entries;
- __le16 supported_feats;
- u8 reserved[4];
- struct cxl_feat_entry ents[] __counted_by_le(num_entries);
-} __packed;
-
struct cxl_features_state {
struct fwctl_device fwctl;
struct cxl_features *features;
@@ -104,57 +56,6 @@ struct cxl_features_state {
struct cxl_feat_entry *entries;
};
-/*
- * Get Feature CXL 3.1 Spec 8.2.9.6.2
- */
-
-/*
- * Get Feature input payload
- * CXL rev 3.1 section 8.2.9.6.2 Table 8-99
- */
-enum cxl_get_feat_selection {
- CXL_GET_FEAT_SEL_CURRENT_VALUE,
- CXL_GET_FEAT_SEL_DEFAULT_VALUE,
- CXL_GET_FEAT_SEL_SAVED_VALUE,
- CXL_GET_FEAT_SEL_MAX
-};
-
-struct cxl_mbox_get_feat_in {
- uuid_t uuid;
- __le16 offset;
- __le16 count;
- u8 selection;
-} __packed;
-
-/*
- * Set Feature CXL 3.1 Spec 8.2.9.6.3
- */
-
-/*
- * Set Feature input payload
- * CXL rev 3.1 section 8.2.9.6.3 Table 8-101
- */
-/* Set Feature : Payload in flags */
-#define CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK GENMASK(2, 0)
-enum cxl_set_feat_flag_data_transfer {
- CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER = 0,
- CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER,
- CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER,
- CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER,
- CXL_SET_FEAT_FLAG_ABORT_DATA_TRANSFER,
- CXL_SET_FEAT_FLAG_DATA_TRANSFER_MAX
-};
-
-#define CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET BIT(3)
-
-struct cxl_mbox_set_feat_hdr {
- uuid_t uuid;
- __le32 flags;
- __le16 offset;
- u8 version;
- u8 rsvd[9];
-} __packed;
-
bool cxl_feature_enabled(struct cxl_features_state *cfs, u16 opcode);
struct cxl_features *cxl_features_alloc(struct cxl_mailbox *cxl_mbox,
struct device *parent);
diff --git a/include/uapi/cxl/features.h b/include/uapi/cxl/features.h
new file mode 100644
index 000000000000..18b74252058a
--- /dev/null
+++ b/include/uapi/cxl/features.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Copyright (c) 2024,2025, Intel Corporation
+ *
+ * These are definitions for the mailbox command interface of CXL subsystem.
+ */
+#ifndef _UAPI_CXL_FEATURES_H_
+#define _UAPI_CXL_FEATURES_H_
+
+#include <linux/types.h>
+#ifndef __KERNEL__
+#include <uuid/uuid.h>
+#else
+#include <linux/uuid.h>
+#endif
+
+/* Get Supported Features (0x500h) CXL r3.1 8.2.9.6.1 */
+struct cxl_mbox_get_sup_feats_in {
+ __le32 count;
+ __le16 start_idx;
+ __u8 reserved[2];
+} __attribute__ ((__packed__));
+
+/* CXL spec r3.2 Table 8-87 command effects */
+#define CXL_CMD_CONFIG_CHANGE_COLD_RESET BIT(0)
+#define CXL_CMD_CONFIG_CHANGE_IMMEDIATE BIT(1)
+#define CXL_CMD_DATA_CHANGE_IMMEDIATE BIT(2)
+#define CXL_CMD_POLICY_CHANGE_IMMEDIATE BIT(3)
+#define CXL_CMD_LOG_CHANGE_IMMEDIATE BIT(4)
+#define CXL_CMD_SECURITY_STATE_CHANGE BIT(5)
+#define CXL_CMD_BACKGROUND BIT(6)
+#define CXL_CMD_BGCMD_ABORT_SUPPORTED BIT(7)
+#define CXL_CMD_EFFECTS_EXTEND BIT(9)
+#define CXL_CMD_CONFIG_CHANGE_CONV_RESET BIT(10)
+#define CXL_CMD_CONFIG_CHANGE_CXL_RESET BIT(11)
+
+/*
+ * CXL spec r3.2 Table 8-109
+ * Get Supported Features Supported Feature Entry
+ * Attribute Flags
+ */
+#define CXL_FEATURE_F_CHANGEABLE BIT(0)
+#define CXL_FEATURE_F_PERSIST_FW_UPDATE BIT(4)
+#define CXL_FEATURE_F_DEFAULT_SEL BIT(5)
+#define CXL_FEATURE_F_SAVED_SEL BIT(6)
+
+struct cxl_feat_entry {
+ uuid_t uuid;
+ __le16 id;
+ __le16 get_feat_size;
+ __le16 set_feat_size;
+ __le32 flags;
+ __u8 get_feat_ver;
+ __u8 set_feat_ver;
+ __le16 effects;
+ __u8 reserved[18];
+} __attribute__ ((__packed__));
+
+struct cxl_mbox_get_sup_feats_out {
+ __le16 num_entries;
+ __le16 supported_feats;
+ __u8 reserved[4];
+ struct cxl_feat_entry ents[] __counted_by_le(num_entries);
+} __attribute__ ((__packed__));
+
+/*
+ * Get Feature CXL 3.1 Spec 8.2.9.6.2
+ */
+
+/*
+ * Get Feature input payload
+ * CXL rev 3.1 section 8.2.9.6.2 Table 8-99
+ */
+enum cxl_get_feat_selection {
+ CXL_GET_FEAT_SEL_CURRENT_VALUE,
+ CXL_GET_FEAT_SEL_DEFAULT_VALUE,
+ CXL_GET_FEAT_SEL_SAVED_VALUE,
+ CXL_GET_FEAT_SEL_MAX
+};
+
+struct cxl_mbox_get_feat_in {
+ uuid_t uuid;
+ __le16 offset;
+ __le16 count;
+ __u8 selection;
+} __attribute__ ((__packed__));
+
+/*
+ * Set Feature CXL 3.1 Spec 8.2.9.6.3
+ */
+
+/*
+ * Set Feature input payload
+ * CXL rev 3.1 section 8.2.9.6.3 Table 8-101
+ */
+/* Set Feature : Payload in flags */
+#define CXL_SET_FEAT_FLAG_DATA_TRANSFER_MASK GENMASK(2, 0)
+enum cxl_set_feat_flag_data_transfer {
+ CXL_SET_FEAT_FLAG_FULL_DATA_TRANSFER = 0,
+ CXL_SET_FEAT_FLAG_INITIATE_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_CONTINUE_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_FINISH_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_ABORT_DATA_TRANSFER,
+ CXL_SET_FEAT_FLAG_DATA_TRANSFER_MAX
+};
+
+#define CXL_SET_FEAT_FLAG_DATA_SAVED_ACROSS_RESET BIT(3)
+
+struct cxl_mbox_set_feat_hdr {
+ uuid_t uuid;
+ __le32 flags;
+ __le16 offset;
+ __u8 version;
+ __u8 rsvd[9];
+} __attribute__ ((__packed__));
+
+#endif
--
2.47.1
next prev parent reply other threads:[~2025-01-22 23:52 UTC|newest]
Thread overview: 72+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-22 23:50 [PATCH v1 0/19] cxl: Add CXL feature commands support via fwctl Dave Jiang
2025-01-22 23:50 ` [PATCH v1 01/19] cxl: Refactor user ioctl command path from mds to mailbox Dave Jiang
2025-01-22 23:50 ` [PATCH v1 02/19] cxl: Add skeletal features driver Dave Jiang
2025-01-23 3:59 ` Dan Williams
2025-01-23 15:49 ` Dave Jiang
2025-01-23 19:57 ` Dan Williams
2025-01-23 17:24 ` Jonathan Cameron
2025-01-22 23:50 ` [PATCH v1 03/19] cxl: Enumerate feature commands Dave Jiang
2025-01-23 17:33 ` Jonathan Cameron
2025-01-23 23:55 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 04/19] cxl: Add Get Supported Features command for kernel usage Dave Jiang
2025-01-23 17:43 ` Jonathan Cameron
2025-01-24 0:30 ` Dan Williams
2025-01-24 15:01 ` Jason Gunthorpe
2025-01-27 11:10 ` Jonathan Cameron
2025-01-28 0:54 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 05/19] cxl: Add features driver attribute to emit number of features supported Dave Jiang
2025-01-23 17:44 ` Jonathan Cameron
2025-01-24 0:35 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 06/19] cxl/test: Add Get Supported Features mailbox command support Dave Jiang
2025-01-23 17:47 ` Jonathan Cameron
2025-01-24 0:42 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 07/19] cxl/mbox: Add GET_FEATURE mailbox command Dave Jiang
2025-01-23 17:50 ` Jonathan Cameron
2025-01-24 22:58 ` Dan Williams
2025-01-29 0:14 ` Dave Jiang
2025-01-22 23:50 ` [PATCH v1 08/19] cxl/mbox: Add SET_FEATURE " Dave Jiang
2025-01-23 17:52 ` Jonathan Cameron
2025-01-24 23:01 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 09/19] cxl: Setup exclusive CXL features that are reserved for the kernel Dave Jiang
2025-01-23 17:59 ` Jonathan Cameron
2025-01-24 23:05 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 10/19] cxl: Add FWCTL support to the CXL features driver Dave Jiang
2025-01-23 18:04 ` Jonathan Cameron
2025-01-23 18:53 ` Jason Gunthorpe
2025-01-24 23:14 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 11/19] cxl: Add support for get driver information Dave Jiang
2025-01-23 18:09 ` Jonathan Cameron
2025-01-25 1:26 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 12/19] cxl: Move cxl_mem.h under uapi to cxl exclusive directory Dave Jiang
2025-01-23 18:10 ` Jonathan Cameron
2025-01-25 1:29 ` Dan Williams
2025-01-22 23:50 ` Dave Jiang [this message]
2025-01-23 18:12 ` [PATCH v1 13/19] cxl: Move cxl feature command structs to user header Jonathan Cameron
2025-01-23 18:13 ` Jonathan Cameron
2025-01-25 1:34 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 14/19] cxl: Add support for fwctl RPC command to enable CXL feature commands Dave Jiang
2025-01-23 18:21 ` Jonathan Cameron
2025-01-25 2:08 ` Dan Williams
2025-01-27 10:51 ` Jonathan Cameron
2025-01-28 0:40 ` Dan Williams
2025-01-28 12:01 ` Jonathan Cameron
2025-01-28 15:55 ` Dave Jiang
2025-01-30 13:42 ` Jonathan Cameron
2025-02-04 1:43 ` Dan Williams
2025-02-04 10:04 ` Jonathan Cameron
2025-02-04 22:26 ` Dan Williams
2025-02-05 17:36 ` Jonathan Cameron
2025-02-05 18:02 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 15/19] cxl: Add support to handle user feature commands for get feature Dave Jiang
2025-01-23 18:25 ` Jonathan Cameron
2025-01-25 2:23 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 16/19] cxl: Add support to handle user feature commands for set feature Dave Jiang
2025-01-23 18:26 ` Jonathan Cameron
2025-01-25 2:29 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 17/19] cxl/test: Add Get Feature support to cxl_test Dave Jiang
2025-01-25 2:33 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 18/19] cxl/test: Add Set " Dave Jiang
2025-01-25 2:36 ` Dan Williams
2025-01-22 23:50 ` [PATCH v1 19/19] fwctl/cxl: Add documentation to FWCTL CXL Dave Jiang
2025-01-25 2:55 ` Dan Williams
2025-01-23 17:03 ` [PATCH v1 0/19] cxl: Add CXL feature commands support via fwctl Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250122235159.2716036-14-dave.jiang@intel.com \
--to=dave.jiang@intel.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jgg@nvidia.com \
--cc=linux-cxl@vger.kernel.org \
--cc=shiju.jose@huawei.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox