From: Dave Jiang <dave.jiang@intel.com>
To: linux-cxl@vger.kernel.org
Cc: dan.j.williams@intel.com, dave@stgolabs.net,
jonathan.cameron@huawei.com, alison.schofield@intel.com,
ira.weiny@intel.com, rrichter@amd.com, ming.li@zohomail.com
Subject: [PATCH 1/4] cxl: Saperate out CXL dport->id vs actual dport hardware id
Date: Fri, 4 Apr 2025 15:57:33 -0700 [thread overview]
Message-ID: <20250404230049.3578835-2-dave.jiang@intel.com> (raw)
In-Reply-To: <20250404230049.3578835-1-dave.jiang@intel.com>
In preparation to allow dport to be allocated without being active, make
dport->id to be Linux id that enumerates the dport objects per port.
Keep the hardware id under dport->port_id to maintain compatibility and
introduce a dport->id as the enumeration id.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/cxl/core/port.c | 40 +++++++++++++++++++++++++++++-----------
drivers/cxl/cxl.h | 4 ++++
2 files changed, 33 insertions(+), 11 deletions(-)
diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c
index 0fd6646c1a2e..e90e55bc11ac 100644
--- a/drivers/cxl/core/port.c
+++ b/drivers/cxl/core/port.c
@@ -159,7 +159,7 @@ static ssize_t emit_target_list(struct cxl_switch_decoder *cxlsd, char *buf)
if (i + 1 < cxld->interleave_ways)
next = cxlsd->target[i + 1];
- rc = sysfs_emit_at(buf, offset, "%d%s", dport->port_id,
+ rc = sysfs_emit_at(buf, offset, "%d%s", dport->id,
next ? "," : "");
if (rc < 0)
return rc;
@@ -739,6 +739,7 @@ static struct cxl_port *cxl_port_alloc(struct device *uport_dev,
dev->parent = uport_dev;
ida_init(&port->decoder_ida);
+ ida_init(&port->dport_ida);
port->hdm_end = -1;
port->commit_end = -1;
xa_init(&port->dports);
@@ -1044,14 +1045,14 @@ void put_cxl_root(struct cxl_root *cxl_root)
}
EXPORT_SYMBOL_NS_GPL(put_cxl_root, "CXL");
-static struct cxl_dport *find_dport(struct cxl_port *port, int id)
+static struct cxl_dport *find_dport(struct cxl_port *port, int port_id)
{
struct cxl_dport *dport;
unsigned long index;
device_lock_assert(&port->dev);
xa_for_each(&port->dports, index, dport)
- if (dport->port_id == id)
+ if (dport->port_id == port_id)
return dport;
return NULL;
}
@@ -1105,6 +1106,7 @@ static void cxl_dport_remove(void *data)
struct cxl_port *port = dport->port;
xa_erase(&port->dports, (unsigned long) dport->dport_dev);
+ ida_free(&port->dport_ida, dport->id);
put_device(dport->dport_dev);
}
@@ -1114,7 +1116,7 @@ static void cxl_dport_unlink(void *data)
struct cxl_port *port = dport->port;
char link_name[CXL_TARGET_STRLEN];
- sprintf(link_name, "dport%d", dport->port_id);
+ sprintf(link_name, "dport%d", dport->id);
sysfs_remove_link(&port->dev.kobj, link_name);
}
@@ -1126,7 +1128,7 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
char link_name[CXL_TARGET_STRLEN];
struct cxl_dport *dport;
struct device *host;
- int rc;
+ int id, rc;
if (is_cxl_root(port))
host = port->uport_dev;
@@ -1139,29 +1141,41 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
return ERR_PTR(-ENXIO);
}
- if (snprintf(link_name, CXL_TARGET_STRLEN, "dport%d", port_id) >=
- CXL_TARGET_STRLEN)
+ id = ida_alloc(&port->dport_ida, GFP_KERNEL);
+ if (id < 0)
+ return ERR_PTR(id);
+
+ if (snprintf(link_name, CXL_TARGET_STRLEN, "dport%d", id) >=
+ CXL_TARGET_STRLEN) {
+ ida_free(&port->dport_ida, id);
return ERR_PTR(-EINVAL);
+ }
dport = devm_kzalloc(host, sizeof(*dport), GFP_KERNEL);
- if (!dport)
+ if (!dport) {
+ ida_free(&port->dport_ida, id);
return ERR_PTR(-ENOMEM);
+ }
dport->dport_dev = dport_dev;
dport->port_id = port_id;
dport->port = port;
+ dport->id = id;
if (rcrb == CXL_RESOURCE_NONE) {
rc = cxl_dport_setup_regs(&port->dev, dport,
component_reg_phys);
- if (rc)
+ if (rc) {
+ ida_free(&port->dport_ida, id);
return ERR_PTR(rc);
+ }
} else {
dport->rcrb.base = rcrb;
component_reg_phys = __rcrb_to_component(dport_dev, &dport->rcrb,
CXL_RCRB_DOWNSTREAM);
if (component_reg_phys == CXL_RESOURCE_NONE) {
dev_warn(dport_dev, "Invalid Component Registers in RCRB");
+ ida_free(&port->dport_ida, id);
return ERR_PTR(-ENXIO);
}
@@ -1170,8 +1184,10 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
* memdev
*/
rc = cxl_dport_setup_regs(NULL, dport, component_reg_phys);
- if (rc)
+ if (rc) {
+ ida_free(&port->dport_ida, id);
return ERR_PTR(rc);
+ }
dport->rch = true;
}
@@ -1183,8 +1199,10 @@ __devm_cxl_add_dport(struct cxl_port *port, struct device *dport_dev,
cond_cxl_root_lock(port);
rc = add_dport(port, dport);
cond_cxl_root_unlock(port);
- if (rc)
+ if (rc) {
+ ida_free(&port->dport_ida, id);
return ERR_PTR(rc);
+ }
get_device(dport_dev);
rc = devm_add_action_or_reset(host, cxl_dport_remove, dport);
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index be8a7dc77719..c942fa40c869 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -583,6 +583,7 @@ struct cxl_dax_region {
* @regions: cxl_region_ref instances, regions mapped by this port
* @parent_dport: dport that points to this port in the parent
* @decoder_ida: allocator for decoder ids
+ * @dport_ida: allocator for dport ids
* @reg_map: component and ras register mapping parameters
* @nr_dports: number of entries in @dports
* @hdm_end: track last allocated HDM decoder instance for allocation ordering
@@ -604,6 +605,7 @@ struct cxl_port {
struct xarray regions;
struct cxl_dport *parent_dport;
struct ida decoder_ida;
+ struct ida dport_ida;
struct cxl_register_map reg_map;
int nr_dports;
int hdm_end;
@@ -657,6 +659,7 @@ struct cxl_rcrb_info {
* struct cxl_dport - CXL downstream port
* @dport_dev: PCI bridge or firmware device representing the downstream link
* @reg_map: component and ras register mapping parameters
+ * @id: Linux id to enumerate dport instances per port
* @port_id: unique hardware identifier for dport in decoder target list
* @rcrb: Data about the Root Complex Register Block layout
* @rch: Indicate whether this dport was enumerated in RCH or VH mode
@@ -668,6 +671,7 @@ struct cxl_rcrb_info {
struct cxl_dport {
struct device *dport_dev;
struct cxl_register_map reg_map;
+ int id;
int port_id;
struct cxl_rcrb_info rcrb;
bool rch;
--
2.49.0
next prev parent reply other threads:[~2025-04-04 23:00 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-04 22:57 [PATCH 0/4] cxl: Delay HB port and switch dport probing until endpoint dev probe Dave Jiang
2025-04-04 22:57 ` Dave Jiang [this message]
2025-04-22 16:54 ` [PATCH 1/4] cxl: Saperate out CXL dport->id vs actual dport hardware id Jonathan Cameron
2025-04-25 22:26 ` Dave Jiang
2025-04-22 19:37 ` Dan Williams
2025-04-25 22:27 ` Dave Jiang
2025-04-04 22:57 ` [PATCH 2/4] cxl: Defer hardware dport->port_id assignment and registers probing Dave Jiang
2025-04-11 2:20 ` Li Ming
2025-04-14 21:45 ` Dave Jiang
2025-04-22 17:05 ` Jonathan Cameron
2025-04-25 22:49 ` Dave Jiang
2025-04-22 20:12 ` Dan Williams
2025-04-29 18:41 ` Dave Jiang
2025-04-04 22:57 ` [PATCH 3/4] cxl: Add late host bridge uport mapping update Dave Jiang
2025-04-11 2:32 ` Li Ming
2025-04-14 22:06 ` Dave Jiang
2025-04-22 17:15 ` Jonathan Cameron
2025-04-23 6:10 ` Dan Williams
2025-04-23 15:49 ` Dave Jiang
2025-04-04 22:57 ` [PATCH 4/4] cxl/test: Add workaround for cxl_test for cxl_core calling mocked functions Dave Jiang
2025-04-22 16:31 ` Jonathan Cameron
2025-04-29 19:52 ` Dan Williams
2025-04-11 3:05 ` [PATCH 0/4] cxl: Delay HB port and switch dport probing until endpoint dev probe Li Ming
2025-04-14 15:34 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250404230049.3578835-2-dave.jiang@intel.com \
--to=dave.jiang@intel.com \
--cc=alison.schofield@intel.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=ira.weiny@intel.com \
--cc=jonathan.cameron@huawei.com \
--cc=linux-cxl@vger.kernel.org \
--cc=ming.li@zohomail.com \
--cc=rrichter@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox