Linux CXL
 help / color / mirror / Atom feed
From: Dave Jiang <dave.jiang@intel.com>
To: linux-acpi@vger.kernel.org, linux-cxl@vger.kernel.org
Cc: rafael@kernel.org, tony.luck@intel.com, bp@alien8.de,
	guohanjun@huawei.com, mchehab@kernel.org,
	xueshuai@linux.alibaba.com, terry.bowman@amd.com,
	benjamin.cheatham@amd.com, alison.schofield@intel.com,
	sashiko-bot@kernel.org
Subject: [PATCH v4 12/13] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata
Date: Mon, 24 Aug 2026 10:49:35 -0700	[thread overview]
Message-ID: <20260824174936.939059-13-dave.jiang@intel.com> (raw)
In-Reply-To: <20260824174936.939059-1-dave.jiang@intel.com>

ghes_handle_aer() copies sizeof(struct aer_capability_regs) out of the
fixed 96-byte pcie_err->aer_info. The struct is larger, so the copy reads
past the section. It also fills the software-only header_len and flit
fields of the embedded struct pcie_tlp_log from raw firmware bytes, and
pcie_print_tlp_log() uses both to bound a loop over dw[], so a large value
walks past the array. Nothing checks that the section can hold a struct
cper_sec_pcie either.

Validate error_data_length, zero the destination, bound the copy to the
96-byte source, and clear header_len and flit, mirroring the
extlog_print_pcie() fix.

Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260714231835.303081-1-dave.jiang@intel.com?part=3
Fixes: 7e077e6707b3 ("PCI/ERR: Handle TLP Log in Flit mode")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
 drivers/acpi/apei/ghes.c | 22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index 0cc1e6383635..d6643127a2df 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -642,11 +642,14 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 #ifdef CONFIG_ACPI_APEI_PCIEAER
 	struct cper_sec_pcie *pcie_err = acpi_hest_get_payload(gdata);
 
+	if (gdata->error_data_length < sizeof(*pcie_err))
+		return;
+
 	if (pcie_err->validation_bits & CPER_PCIE_VALID_DEVICE_ID &&
 	    pcie_err->validation_bits & CPER_PCIE_VALID_AER_INFO) {
+		struct aer_capability_regs *aer_info;
 		unsigned int devfn;
 		int aer_severity;
-		u8 *aer_info;
 
 		devfn = PCI_DEVFN(pcie_err->device_id.device,
 				  pcie_err->device_id.function);
@@ -664,13 +667,22 @@ static void ghes_handle_aer(struct acpi_hest_generic_data *gdata)
 						  sizeof(struct aer_capability_regs));
 		if (!aer_info)
 			return;
-		memcpy(aer_info, pcie_err->aer_info, sizeof(struct aer_capability_regs));
+
+		/*
+		 * The CPER source is a fixed 96 bytes, shorter than struct
+		 * aer_capability_regs, so bound the copy to it. header_len and
+		 * flit are software-only and land inside those 96 bytes; clear
+		 * them so firmware cannot drive the pcie_print_tlp_log() loop
+		 * over dw[] out of bounds.
+		 */
+		memset(aer_info, 0, sizeof(struct aer_capability_regs));
+		memcpy(aer_info, pcie_err->aer_info, sizeof(pcie_err->aer_info));
+		aer_info->header_log.header_len = 0;
+		aer_info->header_log.flit = false;
 
 		aer_recover_queue(pcie_err->device_id.segment,
 				  pcie_err->device_id.bus,
-				  devfn, aer_severity,
-				  (struct aer_capability_regs *)
-				  aer_info);
+				  devfn, aer_severity, aer_info);
 	}
 #endif
 }
-- 
2.54.0


  parent reply	other threads:[~2026-08-24 17:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-24 17:49 [PATCH v4 00/13] ACPI: APEI: GHES: Collection of fixes for issues reported by sashiko Dave Jiang
2026-08-24 17:49 ` [PATCH v4 01/13] efi/cper: Reject CPER records with an out-of-range error_data_length Dave Jiang
2026-08-24 18:10   ` sashiko-bot
2026-08-24 21:57   ` Jonathan Cameron
2026-08-25 16:31     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 02/13] efi/cper: Reject an error status block length that wraps a u32 Dave Jiang
2026-08-24 18:03   ` sashiko-bot
2026-08-24 22:22   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 03/13] ACPI: extlog: Validate elog record length before walking sections Dave Jiang
2026-08-24 18:07   ` sashiko-bot
2026-08-24 22:28   ` Jonathan Cameron
2026-08-25 17:15     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 04/13] ACPI: extlog: Defer CXL protocol error handling to avoid lock inversion Dave Jiang
2026-08-24 18:03   ` sashiko-bot
2026-08-24 22:29   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 05/13] ACPI: extlog: Avoid populating software AER metadata from raw hardware buffer Dave Jiang
2026-08-24 18:13   ` sashiko-bot
2026-08-24 23:05   ` Jonathan Cameron
2026-08-25 17:38     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 06/13] ACPI: extlog: Validate PCIe error section length before payload access Dave Jiang
2026-08-24 18:07   ` sashiko-bot
2026-08-24 23:08   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 07/13] ACPI: extlog: Fix CONFIG_ACPI_APEI_PCIEAER guard typo Dave Jiang
2026-08-24 18:15   ` sashiko-bot
2026-08-24 23:11   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 08/13] ACPI: APEI: GHES: Bound CXL event record copy to the firmware section length Dave Jiang
2026-08-24 23:13   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 09/13] ACPI: APEI: GHES: Validate CXL protocol error section length before RAS cap copy Dave Jiang
2026-08-24 18:10   ` sashiko-bot
2026-08-24 23:14   ` Jonathan Cameron
2026-08-24 17:49 ` [PATCH v4 10/13] efi/cper: Read only validated fields in cper_mem_err_pack() Dave Jiang
2026-08-24 18:08   ` sashiko-bot
2026-08-24 17:49 ` [PATCH v4 11/13] ACPI: APEI: GHES: Validate memory error section length before payload access Dave Jiang
2026-08-24 18:17   ` sashiko-bot
2026-08-24 17:49 ` Dave Jiang [this message]
2026-08-24 18:17   ` [PATCH v4 12/13] ACPI: APEI: GHES: Bound AER info copy and sanitize software metadata sashiko-bot
2026-08-24 21:32     ` Dave Jiang
2026-08-24 17:49 ` [PATCH v4 13/13] cxl/ras: Make cxl_cper_handle_prot_err() static Dave Jiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260824174936.939059-13-dave.jiang@intel.com \
    --to=dave.jiang@intel.com \
    --cc=alison.schofield@intel.com \
    --cc=benjamin.cheatham@amd.com \
    --cc=bp@alien8.de \
    --cc=guohanjun@huawei.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-cxl@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=rafael@kernel.org \
    --cc=sashiko-bot@kernel.org \
    --cc=terry.bowman@amd.com \
    --cc=tony.luck@intel.com \
    --cc=xueshuai@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox