From: Neil Armstrong <neil.armstrong@linaro.org>
To: david@ixit.cz, Dzmitry Sankouski <dsankouski@gmail.com>,
Jessica Zhang <jesszhan0024@gmail.com>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>
Cc: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
phone-devel@vger.kernel.org
Subject: Re: [PATCH 05/11] drm/panel: s6e3ha8: Prepare for supporting multiple panels
Date: Thu, 24 Sep 2026 15:26:15 +0200 [thread overview]
Message-ID: <104333a1-5e38-40e9-968f-00f9bb324a3c@linaro.org> (raw)
In-Reply-To: <20260920-crosshatch-panel-v1-5-de6e9512da96@ixit.cz>
On 9/20/26 13:05, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
>
> The S6E3HA8 DDIC drives more panels than the Galaxy S9 (AMB577PX01)
> one currently supported. Move the display mode, DSI mode flags,
> regulator supplies and panel functions into a per-compatible descriptor
> passed as OF match data, and rename the panel-specific symbols
> accordingly.
>
> No functional change.
>
> Assisted-by: LLM
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
> drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c | 118 ++++++++++++++++----------
> 1 file changed, 74 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> index a0015ac0e2782..5e1e997b83b36 100644
> --- a/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> +++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha8.c
> @@ -3,49 +3,73 @@
> // Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
> // Copyright (c) 2013, The Linux Foundation. All rights reserved.
> // Copyright (c) 2024 Dzmitry Sankouski <dsankouski@gmail.com>
>
> #include <linux/delay.h>
> #include <linux/gpio/consumer.h>
> #include <linux/module.h>
> #include <linux/of.h>
> +#include <linux/property.h>
> #include <linux/regulator/consumer.h>
>
> #include <drm/display/drm_dsc.h>
> #include <drm/display/drm_dsc_helper.h>
> #include <drm/drm_mipi_dsi.h>
> #include <drm/drm_probe_helper.h>
> #include <drm/drm_panel.h>
>
> #include "panel-samsung-dsi.h"
>
> +struct s6e3ha8_desc {
> + const struct drm_panel_funcs *funcs;
> + const struct drm_display_mode *mode;
> + unsigned long mode_flags;
> + const struct regulator_bulk_data *supplies;
> + unsigned int num_supplies;
> +};
> +
> struct s6e3ha8 {
> struct drm_panel panel;
> struct mipi_dsi_device *dsi;
> + const struct s6e3ha8_desc *desc;
> struct drm_dsc_config dsc;
> struct gpio_desc *reset_gpio;
> struct regulator_bulk_data *supplies;
> };
>
> -static const struct regulator_bulk_data s6e3ha8_supplies[] = {
> +static const struct regulator_bulk_data s6e3ha8_vddr_supplies[] = {
> { .supply = "vdd3" },
> { .supply = "vci" },
> { .supply = "vddr" },
> };
>
> -static inline
> -struct s6e3ha8 *to_s6e3ha8_amb577px01_wqhd(struct drm_panel *panel)
> +static inline struct s6e3ha8 *to_s6e3ha8(struct drm_panel *panel)
> {
> return container_of(panel, struct s6e3ha8, panel);
> }
>
> #define s6e3ha8_afc_off(ctx) \
> mipi_dsi_dcs_write_seq_multi(ctx, 0xe2, 0x00, 0x00)
>
> +static int s6e3ha8_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct s6e3ha8 *priv = to_s6e3ha8(panel);
> +
> + return drm_connector_helper_get_modes_fixed(connector, priv->desc->mode);
> +}
> +
> +static int s6e3ha8_unprepare(struct drm_panel *panel)
> +{
> + struct s6e3ha8 *priv = to_s6e3ha8(panel);
> +
> + return regulator_bulk_disable(priv->desc->num_supplies, priv->supplies);
> +}
> +
> static void s6e3ha8_amb577px01_wqhd_reset(struct s6e3ha8 *priv)
> {
> gpiod_set_value_cansleep(priv->reset_gpio, 1);
> usleep_range(5000, 6000);
> gpiod_set_value_cansleep(priv->reset_gpio, 0);
> usleep_range(5000, 6000);
> gpiod_set_value_cansleep(priv->reset_gpio, 1);
> usleep_range(5000, 6000);
> @@ -130,32 +154,32 @@ static int s6e3ha8_amb577px01_wqhd_on(struct s6e3ha8 *priv)
> mipi_dsi_dcs_write_seq_multi(&ctx, 0xf7, 0x03); /* Gamma, LTPS(AID) update */
> samsung_dsi_test_key_off_lvl2(&ctx);
>
> samsung_dsi_test_key_off_lvl1(&ctx);
>
> return ctx.accum_err;
> }
>
> -static int s6e3ha8_enable(struct drm_panel *panel)
> +static int s6e3ha8_amb577px01_wqhd_enable(struct drm_panel *panel)
> {
> - struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> + struct s6e3ha8 *priv = to_s6e3ha8(panel);
> struct mipi_dsi_device *dsi = priv->dsi;
> struct mipi_dsi_multi_context ctx = { .dsi = dsi };
>
> samsung_dsi_test_key_on_lvl1(&ctx);
> mipi_dsi_dcs_set_display_on_multi(&ctx);
> samsung_dsi_test_key_off_lvl1(&ctx);
>
> return ctx.accum_err;
> }
>
> -static int s6e3ha8_disable(struct drm_panel *panel)
> +static int s6e3ha8_amb577px01_wqhd_disable(struct drm_panel *panel)
> {
> - struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> + struct s6e3ha8 *priv = to_s6e3ha8(panel);
> struct mipi_dsi_device *dsi = priv->dsi;
> struct mipi_dsi_multi_context ctx = { .dsi = dsi };
>
> samsung_dsi_test_key_on_lvl1(&ctx);
> mipi_dsi_dcs_set_display_off_multi(&ctx);
> samsung_dsi_test_key_off_lvl1(&ctx);
> mipi_dsi_msleep(&ctx, 20);
>
> @@ -165,23 +189,23 @@ static int s6e3ha8_disable(struct drm_panel *panel)
>
> mipi_dsi_msleep(&ctx, 160);
>
> return ctx.accum_err;
> }
>
> static int s6e3ha8_amb577px01_wqhd_prepare(struct drm_panel *panel)
> {
> - struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> + struct s6e3ha8 *priv = to_s6e3ha8(panel);
> struct mipi_dsi_device *dsi = priv->dsi;
> struct mipi_dsi_multi_context ctx = { .dsi = dsi };
> struct drm_dsc_picture_parameter_set pps;
> int ret;
>
> - ret = regulator_bulk_enable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies);
> + ret = regulator_bulk_enable(priv->desc->num_supplies, priv->supplies);
> if (ret < 0)
> return ret;
> mipi_dsi_msleep(&ctx, 120);
> s6e3ha8_amb577px01_wqhd_reset(priv);
>
> ret = s6e3ha8_amb577px01_wqhd_on(priv);
> if (ret < 0) {
> gpiod_set_value_cansleep(priv->reset_gpio, 0);
> @@ -193,88 +217,88 @@ static int s6e3ha8_amb577px01_wqhd_prepare(struct drm_panel *panel)
> samsung_dsi_test_key_on_lvl1(&ctx);
> mipi_dsi_picture_parameter_set_multi(&ctx, &pps);
> samsung_dsi_test_key_off_lvl1(&ctx);
>
> mipi_dsi_msleep(&ctx, 28);
>
> return ctx.accum_err;
> err:
> - regulator_bulk_disable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies);
> + regulator_bulk_disable(priv->desc->num_supplies, priv->supplies);
> return ret;
> }
>
> -static int s6e3ha8_amb577px01_wqhd_unprepare(struct drm_panel *panel)
> -{
> - struct s6e3ha8 *priv = to_s6e3ha8_amb577px01_wqhd(panel);
> -
> - return regulator_bulk_disable(ARRAY_SIZE(s6e3ha8_supplies), priv->supplies);
> -}
> -
> static const struct drm_display_mode s6e3ha8_amb577px01_wqhd_mode = {
> .clock = (1440 + 116 + 44 + 120) * (2960 + 120 + 80 + 124) * 60 / 1000,
> .hdisplay = 1440,
> .hsync_start = 1440 + 116,
> .hsync_end = 1440 + 116 + 44,
> .htotal = 1440 + 116 + 44 + 120,
> .vdisplay = 2960,
> .vsync_start = 2960 + 120,
> .vsync_end = 2960 + 120 + 80,
> .vtotal = 2960 + 120 + 80 + 124,
> .width_mm = 64,
> .height_mm = 132,
> };
>
> -static int s6e3ha8_amb577px01_wqhd_get_modes(struct drm_panel *panel,
> - struct drm_connector *connector)
> -{
> - return drm_connector_helper_get_modes_fixed(connector, &s6e3ha8_amb577px01_wqhd_mode);
> -}
> -
> static const struct drm_panel_funcs s6e3ha8_amb577px01_wqhd_panel_funcs = {
> .prepare = s6e3ha8_amb577px01_wqhd_prepare,
> - .unprepare = s6e3ha8_amb577px01_wqhd_unprepare,
> - .get_modes = s6e3ha8_amb577px01_wqhd_get_modes,
> - .enable = s6e3ha8_enable,
> - .disable = s6e3ha8_disable,
> + .unprepare = s6e3ha8_unprepare,
> + .get_modes = s6e3ha8_get_modes,
> + .enable = s6e3ha8_amb577px01_wqhd_enable,
> + .disable = s6e3ha8_amb577px01_wqhd_disable,
> +};
> +
> +static const struct s6e3ha8_desc s6e3ha8_amb577px01_wqhd_desc = {
> + .funcs = &s6e3ha8_amb577px01_wqhd_panel_funcs,
> + .mode = &s6e3ha8_amb577px01_wqhd_mode,
> + .mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
> + MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP |
> + MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET,
> + .supplies = s6e3ha8_vddr_supplies,
> + .num_supplies = ARRAY_SIZE(s6e3ha8_vddr_supplies),
> };
>
> -static int s6e3ha8_amb577px01_wqhd_probe(struct mipi_dsi_device *dsi)
> +static int s6e3ha8_probe(struct mipi_dsi_device *dsi)
> {
> struct device *dev = &dsi->dev;
> + const struct s6e3ha8_desc *desc;
> struct s6e3ha8 *priv;
> int ret;
>
> - priv = devm_drm_panel_alloc(dev, struct s6e3ha8, panel,
> - &s6e3ha8_amb577px01_wqhd_panel_funcs,
> + desc = device_get_match_data(dev);
> + if (!desc)
> + return -ENODEV;
> +
> + priv = devm_drm_panel_alloc(dev, struct s6e3ha8, panel, desc->funcs,
> DRM_MODE_CONNECTOR_DSI);
> if (IS_ERR(priv))
> return PTR_ERR(priv);
>
> - ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(s6e3ha8_supplies),
> - s6e3ha8_supplies,
> - &priv->supplies);
> + priv->desc = desc;
> +
> + ret = devm_regulator_bulk_get_const(dev, desc->num_supplies,
> + desc->supplies, &priv->supplies);
> if (ret < 0) {
> dev_err(dev, "failed to get regulators: %d\n", ret);
> return ret;
> }
>
> priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> if (IS_ERR(priv->reset_gpio))
> return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
> "Failed to get reset-gpios\n");
>
> priv->dsi = dsi;
> mipi_dsi_set_drvdata(dsi, priv);
>
> dsi->lanes = 4;
> dsi->format = MIPI_DSI_FMT_RGB888;
> - dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
> - MIPI_DSI_MODE_VIDEO_NO_HFP | MIPI_DSI_MODE_VIDEO_NO_HBP |
> - MIPI_DSI_MODE_VIDEO_NO_HSA | MIPI_DSI_MODE_NO_EOT_PACKET;
> + dsi->mode_flags = priv->desc->mode_flags;
>
> priv->panel.prepare_prev_first = true;
>
> ret = devm_drm_panel_add(dev, &priv->panel);
> if (ret)
> return ret;
>
> /* This panel only supports DSC; unconditionally enable it */
> @@ -295,27 +319,33 @@ static int s6e3ha8_amb577px01_wqhd_probe(struct mipi_dsi_device *dsi)
> if (ret < 0) {
> dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
> return ret;
> }
>
> return 0;
> }
>
> -static const struct of_device_id s6e3ha8_amb577px01_wqhd_of_match[] = {
> - { .compatible = "samsung,s6e3ha8" }, /* deprecated */
> - { .compatible = "samsung,s6e3ha8-amb577px01" },
> +static const struct of_device_id s6e3ha8_of_match[] = {
> + {
> + /* deprecated */
> + .compatible = "samsung,s6e3ha8",
> + .data = &s6e3ha8_amb577px01_wqhd_desc,
> + }, {
> + .compatible = "samsung,s6e3ha8-amb577px01",
> + .data = &s6e3ha8_amb577px01_wqhd_desc,
> + },
> { /* sentinel */ }
> };
> -MODULE_DEVICE_TABLE(of, s6e3ha8_amb577px01_wqhd_of_match);
> +MODULE_DEVICE_TABLE(of, s6e3ha8_of_match);
>
> -static struct mipi_dsi_driver s6e3ha8_amb577px01_wqhd_driver = {
> - .probe = s6e3ha8_amb577px01_wqhd_probe,
> +static struct mipi_dsi_driver s6e3ha8_driver = {
> + .probe = s6e3ha8_probe,
> .driver = {
> .name = "panel-s6e3ha8",
> - .of_match_table = s6e3ha8_amb577px01_wqhd_of_match,
> + .of_match_table = s6e3ha8_of_match,
> },
> };
> -module_mipi_dsi_driver(s6e3ha8_amb577px01_wqhd_driver);
> +module_mipi_dsi_driver(s6e3ha8_driver);
>
> MODULE_AUTHOR("Dzmitry Sankouski <dsankouski@gmail.com>");
> MODULE_DESCRIPTION("DRM driver for S6E3HA8 panel");
> MODULE_LICENSE("GPL");
>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Thanks,
Neil
next prev parent reply other threads:[~2026-09-24 13:26 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-20 11:05 [PATCH 00/11] Pixel 3 XL display panel support David Heidelberg via B4 Relay
2026-09-20 11:05 ` [PATCH 01/11] dt-bindings: display: panel: s6e3ha8: Adjust to reflect the DDIC and panel used David Heidelberg via B4 Relay
2026-09-20 11:05 ` [PATCH 02/11] dt-bindings: display: panel: samsung,s6e3ha8: Add AMB630QY01 panel David Heidelberg via B4 Relay
2026-09-20 11:12 ` sashiko-bot
2026-09-20 11:05 ` [PATCH 03/11] drm/panel: s6e3ha8: Really assert reset on the failure David Heidelberg via B4 Relay
2026-09-24 13:24 ` Neil Armstrong
2026-09-20 11:05 ` [PATCH 04/11] drm/panel: s6e3ha8: Introduce AMB577PX01 panel compatible David Heidelberg via B4 Relay
2026-09-23 22:51 ` [PATCH 04/11] drm/panel: s6e3ha8: Introduce AMB577PX01 panel Petr Vorel
2026-09-24 13:25 ` [PATCH 04/11] drm/panel: s6e3ha8: Introduce AMB577PX01 panel compatible Neil Armstrong
2026-09-20 11:05 ` [PATCH 05/11] drm/panel: s6e3ha8: Prepare for supporting multiple panels David Heidelberg via B4 Relay
2026-09-24 13:26 ` Neil Armstrong [this message]
2026-09-20 11:05 ` [PATCH 06/11] drm/panel: s6e3ha8: Correct the polarity logic within David Heidelberg via B4 Relay
2026-09-24 13:26 ` Neil Armstrong
2026-09-20 11:05 ` [PATCH 07/11] drm/panel: s6e3ha8: Assert reset GPIO in unprepare David Heidelberg via B4 Relay
2026-09-24 13:27 ` Neil Armstrong
2026-09-20 11:05 ` [PATCH 08/11] drm/panel: s6e3ha8: add Samsung AMB630QY01 (Google Pixel 3 XL) panel David Heidelberg via B4 Relay
2026-09-20 11:15 ` sashiko-bot
2026-09-24 13:28 ` Neil Armstrong
2026-09-20 11:05 ` [PATCH 09/11] arm64: dts: qcom: sdm845-samsung-starqltechn: Update panel compatible David Heidelberg via B4 Relay
2026-09-23 22:25 ` [PATCH 09/11] arm64: dts: qcom: sdm845-samsung-starqltechn: Update Petr Vorel
2026-09-23 22:38 ` [PATCH 10/11] arm64: dts: qcom: sdm845-google: Move panel pins Petr Vorel
2026-09-23 22:48 ` [PATCH 09/11] arm64: dts: qcom: sdm845-samsung-starqltechn: Update Petr Vorel
2026-09-20 11:05 ` [PATCH 10/11] arm64: dts: qcom: sdm845-google: Move panel pins into common David Heidelberg via B4 Relay
2026-09-23 22:44 ` [PATCH 10/11] arm64: dts: qcom: sdm845-google: Move panel pins Petr Vorel
2026-09-20 11:05 ` [PATCH 11/11] arm64: dts: qcom: sdm845-google-crosshatch: Add display panel David Heidelberg via B4 Relay
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=104333a1-5e38-40e9-968f-00f9bb324a3c@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=abelvesa@kernel.org \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=dsankouski@gmail.com \
--cc=jesszhan0024@gmail.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=phone-devel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox