[PATCH 09/11] arm64: dts: qcom: sdm845-samsung-starqltechn: Update panel compatible

[David Heidelberg via B4 Relay <devnull+david.ixit.cz@kernel.org>]

From: David Heidelberg <david@ixit.cz>

Original compatible describing only the DDIC used, but omit describing
the panel used (Samsung AMB577PX01), which we have no way to detect.

New compatible allows without breaking ABI fixing the inverted reset.

Assisted-by: LLM
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index bd59f1dcd96dc..c156ed3733b4e 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -262,23 +262,23 @@ &mdss {
 	status = "okay";
 };
 
 &mdss_dsi0 {
 	vdda-supply = <&vreg_l26a_1p2>;
 	status = "okay";
 
 	panel@0 {
-		compatible = "samsung,s6e3ha8";
+		compatible = "samsung,s6e3ha8-amb577px01";
 		reg = <0>;
 		vci-supply = <&s2dos05_ldo4>;
 		vddr-supply = <&s2dos05_buck>;
 		vdd3-supply = <&s2dos05_ldo1>;
 		te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 		pinctrl-0 = <&dsi_default &dsi_te>;
 		pinctrl-1 = <&dsi_suspend &dsi_te>;
 		pinctrl-names = "default", "suspend";
 
 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&mdss_dsi0_out>;
 			};

-- 
2.55.0