[PATCH 1/4] dt-bindings: display: amlogic, meson-vpu: Add optional power domain property

[PATCH 1/4] dt-bindings: display: amlogic, meson-vpu: Add optional power domain property

[Neil Armstrong]

The Video Processing Unit power domain was setup by the Vendor U-Boot,
add support for an optional Power Domain phandle to setup it from the kernel.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
index 00f74ba..057b813 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
@@ -64,6 +64,10 @@ Required properties:
 - reg-names: should contain the names of the previous memory regions
 - interrupts: should contain the VENC Vsync interrupt number
 
+Optional properties:
+- power-domains: Optional phandle to associated power domain as described in
+	the file ../power/power_domain.txt
+
 Required nodes:
 
 The connections to the VPU output video ports are modeled using the OF graph
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 1/4] dt-bindings: display: amlogic, meson-vpu: Add optional power domain property

[Rob Herring]

On Tue, Oct 17, 2017 at 10:07:41AM +0200, Neil Armstrong wrote:
> The Video Processing Unit power domain was setup by the Vendor U-Boot,
> add support for an optional Power Domain phandle to setup it from the kernel.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt | 4 ++++
>  1 file changed, 4 insertions(+)

Acked-by: Rob Herring <robh@kernel.org> 

[PATCH 2/4] dt-bindings: display: amlogic, meson-dw-hdmi: Add optional HDMI 5V regulator

[Neil Armstrong]

On reference boards and derivatives, the HDMI Logic is powered by an external
5V regulator.
This regulator was set by the Vendor U-Boot, add optional support for it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
index 7f040ed..bf4a180 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
@@ -48,6 +48,10 @@ Required properties:
   Documentation/devicetree/bindings/reset/reset.txt,
   the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
 
+Optional properties:
+- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
+  logic, as described in the file ../regulator/regulator.txt
+
 Required nodes:
 
 The connections to the HDMI ports are modeled using the OF graph
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/4] dt-bindings: display: amlogic, meson-dw-hdmi: Add optional HDMI 5V regulator

[Rob Herring]

On Tue, Oct 17, 2017 at 10:07:42AM +0200, Neil Armstrong wrote:
> On reference boards and derivatives, the HDMI Logic is powered by an external
> 5V regulator.
> This regulator was set by the Vendor U-Boot, add optional support for it.
> 
> Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> index 7f040ed..bf4a180 100644
> --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> @@ -48,6 +48,10 @@ Required properties:
>    Documentation/devicetree/bindings/reset/reset.txt,
>    the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
>  
> +Optional properties:
> +- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
> +  logic, as described in the file ../regulator/regulator.txt

5V into a modern SoC sounds strange. Is this really for the chip or for 
5V to the connector? The latter should be in the connector node.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/4] dt-bindings: display: amlogic, meson-dw-hdmi: Add optional HDMI 5V regulator

[Neil Armstrong]

On 24/10/2017 00:46, Rob Herring wrote:
> On Tue, Oct 17, 2017 at 10:07:42AM +0200, Neil Armstrong wrote:
>> On reference boards and derivatives, the HDMI Logic is powered by an external
>> 5V regulator.
>> This regulator was set by the Vendor U-Boot, add optional support for it.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
>> index 7f040ed..bf4a180 100644
>> --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
>> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
>> @@ -48,6 +48,10 @@ Required properties:
>>    Documentation/devicetree/bindings/reset/reset.txt,
>>    the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
>>  
>> +Optional properties:
>> +- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
>> +  logic, as described in the file ../regulator/regulator.txt
> 
> 5V into a modern SoC sounds strange. Is this really for the chip or for 
> 5V to the connector? The latter should be in the connector node.
> 
> Rob
> 

Hi Rob,

The chip does not get the 5V but multiple derived voltages, but depends on the 5V regulator to
enable this power supply for the connector and to the hdmi io bank.

So in my opinion it's not related to the connector but to the HDMI logic.

Neil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH 2/4] dt-bindings: display: amlogic, meson-dw-hdmi: Add optional HDMI 5V regulator

[Rob Herring]

On Tue, Oct 24, 2017 at 10:09:15AM +0200, Neil Armstrong wrote:
> On 24/10/2017 00:46, Rob Herring wrote:
> > On Tue, Oct 17, 2017 at 10:07:42AM +0200, Neil Armstrong wrote:
> >> On reference boards and derivatives, the HDMI Logic is powered by an external
> >> 5V regulator.
> >> This regulator was set by the Vendor U-Boot, add optional support for it.
> >>
> >> Signed-off-by: Neil Armstrong <narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
> >> ---
> >>  Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt | 4 ++++
> >>  1 file changed, 4 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> >> index 7f040ed..bf4a180 100644
> >> --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> >> +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
> >> @@ -48,6 +48,10 @@ Required properties:
> >>    Documentation/devicetree/bindings/reset/reset.txt,
> >>    the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
> >>  
> >> +Optional properties:
> >> +- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
> >> +  logic, as described in the file ../regulator/regulator.txt
> > 
> > 5V into a modern SoC sounds strange. Is this really for the chip or for 
> > 5V to the connector? The latter should be in the connector node.
> > 
> > Rob
> > 
> 
> Hi Rob,
> 
> The chip does not get the 5V but multiple derived voltages, but depends on the 5V regulator to
> enable this power supply for the connector and to the hdmi io bank.
> 
> So in my opinion it's not related to the connector but to the HDMI logic.

But you just said it is for the connector too.

In any case, if it is for the HDMI i/o, then

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html