[PATCH 1/1] Documentation/mfd: Fix typos in s2mps11.txt

[PATCH 1/1] Documentation/mfd: Fix typos in s2mps11.txt

[Sachin Kamat]

Fixed trivial typos to improve readability.

Signed-off-by: Sachin Kamat <sachin.kamat-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 Documentation/devicetree/bindings/mfd/s2mps11.txt |    9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
index c9332c6..0ff4e65 100644
--- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
+++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
@@ -1,10 +1,10 @@
 
 * Samsung S2MPS11 Voltage and Current Regulator
 
-The Samsung S2MP211 is a multi-function device which includes voltage and
+The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
-interfaced to the host controller using a I2C interface. Each sub-block is
-addressed by the host system using different I2C slave address.
+interfaced to the host controller using an I2C interface. Each sub-block is
+addressed by the host system using different I2C slave addresses.
 
 Required properties:
 - compatible: Should be "samsung,s2mps11-pmic".
@@ -43,7 +43,8 @@ sub-node should be of the format as listed below.
 
  BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
  regulator-ramp-delay = <0> can be used for them to disable ramp delay.
- In absence of regulator-ramp-delay property, default ramp delay will be used.
+ In the absence of regulator-ramp-delay property, default ramp delay will
+ be used.
 
 NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
 for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/1] Documentation/mfd: Fix typos in s2mps11.txt

[Lee Jones]

As this is only a trivial patch, I'll take it out the hands of the
already overloaded DT maintainers.

> Fixed trivial typos to improve readability.
> 
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/s2mps11.txt |    9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> index c9332c6..0ff4e65 100644
> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
> @@ -1,10 +1,10 @@
>  
>  * Samsung S2MPS11 Voltage and Current Regulator
>  
> -The Samsung S2MP211 is a multi-function device which includes voltage and
> +The Samsung S2MPS11 is a multi-function device which includes voltage and

Nice catch eagle-eye!

>  current regulators, RTC, charger controller and other sub-blocks. It is
> -interfaced to the host controller using a I2C interface. Each sub-block is
> -addressed by the host system using different I2C slave address.
> +interfaced to the host controller using an I2C interface. Each sub-block is
> +addressed by the host system using different I2C slave addresses.
>  
>  Required properties:
>  - compatible: Should be "samsung,s2mps11-pmic".
> @@ -43,7 +43,8 @@ sub-node should be of the format as listed below.
>  
>   BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
>   regulator-ramp-delay = <0> can be used for them to disable ramp delay.
> - In absence of regulator-ramp-delay property, default ramp delay will be used.
> + In the absence of regulator-ramp-delay property, default ramp delay will
> + be used.

So if we're being pertinacity here, your correction isn't much better.

s/of regulator-ramp-delay property,/of {the,an} regulator-ramp-delay property, the

or 

s/of regulator-ramp-delay property,/of regulator-ramp-delay, the

>  NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
>  for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Re: [PATCH 1/1] Documentation/mfd: Fix typos in s2mps11.txt

[Sachin Kamat]

On 8 November 2013 15:58, Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> wrote:
> As this is only a trivial patch, I'll take it out the hands of the
> already overloaded DT maintainers.
>
>> Fixed trivial typos to improve readability.
>>
>> Signed-off-by: Sachin Kamat <sachin.kamat-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>> ---
>>  Documentation/devicetree/bindings/mfd/s2mps11.txt |    9 +++++----
>>  1 file changed, 5 insertions(+), 4 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> index c9332c6..0ff4e65 100644
>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>> @@ -1,10 +1,10 @@
>>
>>  * Samsung S2MPS11 Voltage and Current Regulator
>>
>> -The Samsung S2MP211 is a multi-function device which includes voltage and
>> +The Samsung S2MPS11 is a multi-function device which includes voltage and
>
> Nice catch eagle-eye!

:)

>
>>  current regulators, RTC, charger controller and other sub-blocks. It is
>> -interfaced to the host controller using a I2C interface. Each sub-block is
>> -addressed by the host system using different I2C slave address.
>> +interfaced to the host controller using an I2C interface. Each sub-block is
>> +addressed by the host system using different I2C slave addresses.
>>
>>  Required properties:
>>  - compatible: Should be "samsung,s2mps11-pmic".
>> @@ -43,7 +43,8 @@ sub-node should be of the format as listed below.
>>
>>   BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
>>   regulator-ramp-delay = <0> can be used for them to disable ramp delay.
>> - In absence of regulator-ramp-delay property, default ramp delay will be used.
>> + In the absence of regulator-ramp-delay property, default ramp delay will
>> + be used.
>
> So if we're being pertinacity here, your correction isn't much better.
>
> s/of regulator-ramp-delay property,/of {the,an} regulator-ramp-delay property, the

I like this one :)
>
> or
>
> s/of regulator-ramp-delay property,/of regulator-ramp-delay, the

-- 
With warm regards,
Sachin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/1] Documentation/mfd: Fix typos in s2mps11.txt

[Sachin Kamat]

On 8 November 2013 16:50, Sachin Kamat <sachin.kamat@linaro.org> wrote:
> On 8 November 2013 15:58, Lee Jones <lee.jones@linaro.org> wrote:
>> As this is only a trivial patch, I'll take it out the hands of the
>> already overloaded DT maintainers.
>>
>>> Fixed trivial typos to improve readability.
>>>
>>> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
>>> ---
>>>  Documentation/devicetree/bindings/mfd/s2mps11.txt |    9 +++++----
>>>  1 file changed, 5 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>>> index c9332c6..0ff4e65 100644
>>> --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt
>>> +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt
>>> @@ -1,10 +1,10 @@
>>>
>>>  * Samsung S2MPS11 Voltage and Current Regulator
>>>
>>> -The Samsung S2MP211 is a multi-function device which includes voltage and
>>> +The Samsung S2MPS11 is a multi-function device which includes voltage and
>>
>> Nice catch eagle-eye!
>
> :)
>
>>
>>>  current regulators, RTC, charger controller and other sub-blocks. It is
>>> -interfaced to the host controller using a I2C interface. Each sub-block is
>>> -addressed by the host system using different I2C slave address.
>>> +interfaced to the host controller using an I2C interface. Each sub-block is
>>> +addressed by the host system using different I2C slave addresses.
>>>
>>>  Required properties:
>>>  - compatible: Should be "samsung,s2mps11-pmic".
>>> @@ -43,7 +43,8 @@ sub-node should be of the format as listed below.
>>>
>>>   BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
>>>   regulator-ramp-delay = <0> can be used for them to disable ramp delay.
>>> - In absence of regulator-ramp-delay property, default ramp delay will be used.
>>> + In the absence of regulator-ramp-delay property, default ramp delay will
>>> + be used.
>>
>> So if we're being pertinacity here, your correction isn't much better.
>>
>> s/of regulator-ramp-delay property,/of {the,an} regulator-ramp-delay property, the
>
> I like this one :)
>>
>> or
>>
>> s/of regulator-ramp-delay property,/of regulator-ramp-delay, the
>

Resent this patch with the above suggested changes and some more
updates and hence
with a modified subject line (Documentation/mfd: Update s2mps11.txt).

-- 
With warm regards,
Sachin