From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Qiang Yu <quic_qianyu@quicinc.com>
Cc: vkoul@kernel.org, kishon@kernel.org, robh@kernel.org,
andersson@kernel.org, konradybcio@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
abel.vesa@linaro.org, quic_msarkar@quicinc.com,
quic_devipriy@quicinc.com, dmitry.baryshkov@linaro.org,
kw@linux.com, lpieralisi@kernel.org, neil.armstrong@linaro.org,
linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC
Date: Tue, 24 Sep 2024 15:50:21 +0200 [thread overview]
Message-ID: <20240924135021.ybpyoahlpuvedma5@thinkpad> (raw)
In-Reply-To: <20240924101444.3933828-6-quic_qianyu@quicinc.com>
On Tue, Sep 24, 2024 at 03:14:43AM -0700, Qiang Yu wrote:
> X1E80100 has PCIe ports that support up to Gen4 x8 based on hardware IP
> version 1.38.0.
>
> Currently the ops_1_9_0 which is being used for X1E80100 has config_sid
> callback to config BDF to SID table. However, this callback is not
> required for X1E80100 because it has smmuv3 support and BDF to SID table
> will be not present.
>
> Hence add support for X1E80100 by introducing a new ops and cfg structures
> that don't require the config_sid callback. This could be reused by the
> future platforms based on SMMUv3.
>
Oops... I completely overlooked that you are not adding the SoC support but
fixing the existing one :( Sorry for suggesting a commit message that changed
the context.
For this, you can have something like:
"PCI: qcom: Fix the ops for X1E80100 SoC
X1E80100 SoC is based on SMMUv3, hence it doesn't need the BDF2SID mapping
present in the existing cfg_1_9_0 ops. This is fixed by introducing new ops
'ops_1_38_0' and cfg 'cfg_1_38_0' structures. These are exactly same as the
1_9_0 ones, but they don't have the 'config_sid()' callback that handles the
BDF2SID mapping in the hardware. These new structures could also be used by the
future SoCs making use of SMMUv3."
- Mani
> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 88a98be930e3..56ba8bc72f78 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1367,6 +1367,16 @@ static const struct qcom_pcie_ops ops_2_9_0 = {
> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> };
>
> +/* Qcom IP rev.: 1.38.0 */
> +static const struct qcom_pcie_ops ops_1_38_0 = {
> + .get_resources = qcom_pcie_get_resources_2_7_0,
> + .init = qcom_pcie_init_2_7_0,
> + .post_init = qcom_pcie_post_init_2_7_0,
> + .host_post_init = qcom_pcie_host_post_init_2_7_0,
> + .deinit = qcom_pcie_deinit_2_7_0,
> + .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> +};
> +
> static const struct qcom_pcie_cfg cfg_1_0_0 = {
> .ops = &ops_1_0_0,
> };
> @@ -1409,6 +1419,10 @@ static const struct qcom_pcie_cfg cfg_sc8280xp = {
> .no_l0s = true,
> };
>
> +static const struct qcom_pcie_cfg cfg_1_38_0 = {
> + .ops = &ops_1_38_0,
> +};
> +
> static const struct dw_pcie_ops dw_pcie_ops = {
> .link_up = qcom_pcie_link_up,
> .start_link = qcom_pcie_start_link,
> @@ -1837,7 +1851,7 @@ static const struct of_device_id qcom_pcie_match[] = {
> { .compatible = "qcom,pcie-sm8450-pcie0", .data = &cfg_1_9_0 },
> { .compatible = "qcom,pcie-sm8450-pcie1", .data = &cfg_1_9_0 },
> { .compatible = "qcom,pcie-sm8550", .data = &cfg_1_9_0 },
> - { .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_9_0 },
> + { .compatible = "qcom,pcie-x1e80100", .data = &cfg_1_38_0 },
> { }
> };
>
> --
> 2.34.1
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2024-09-24 13:50 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-24 10:14 [PATCH v4 0/6] Add support for PCIe3 on x1e80100 Qiang Yu
2024-09-24 10:14 ` [PATCH v4 1/6] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8 Qiang Yu
2024-09-24 10:14 ` [PATCH v4 2/6] dt-bindings: PCI: qcom: Move OPP table to qcom,pcie-common.yaml Qiang Yu
2024-09-24 14:08 ` Manivannan Sadhasivam
2024-09-24 18:39 ` Krzysztof Kozlowski
2024-09-24 10:14 ` [PATCH v4 3/6] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3 Qiang Yu
2024-09-24 15:15 ` Johan Hovold
2024-09-25 3:38 ` Qiang Yu
2024-09-25 8:14 ` Johan Hovold
2024-09-24 10:14 ` [PATCH v4 4/6] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks Qiang Yu
2024-09-24 14:31 ` Johan Hovold
2024-09-25 3:40 ` Qiang Yu
2024-09-24 10:14 ` [PATCH v4 5/6] PCI: qcom: Add support for X1E80100 SoC Qiang Yu
2024-09-24 13:50 ` Manivannan Sadhasivam [this message]
2024-09-24 15:17 ` Johan Hovold
2024-09-25 3:47 ` Qiang Yu
2024-09-25 8:07 ` Manivannan Sadhasivam
2024-09-26 3:28 ` Qiang Yu
2024-09-26 5:19 ` Qiang Yu
2024-09-30 7:25 ` Manivannan Sadhasivam
2024-09-25 3:44 ` Qiang Yu
2024-09-24 10:14 ` [PATCH v4 6/6] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100 Qiang Yu
2024-09-24 14:06 ` Manivannan Sadhasivam
2024-09-24 14:26 ` Konrad Dybcio
2024-09-25 3:57 ` Qiang Yu
2024-09-25 8:05 ` Manivannan Sadhasivam
2024-09-25 9:30 ` Konrad Dybcio
2024-09-25 9:46 ` Konrad Dybcio
2024-09-25 12:52 ` Manivannan Sadhasivam
2024-09-26 3:15 ` Qiang Yu
2024-09-30 7:32 ` Manivannan Sadhasivam
2024-09-24 14:43 ` Johan Hovold
2024-09-25 6:37 ` Qiang Yu
2024-09-25 7:58 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240924135021.ybpyoahlpuvedma5@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=abel.vesa@linaro.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=kishon@kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mturquette@baylibre.com \
--cc=neil.armstrong@linaro.org \
--cc=quic_devipriy@quicinc.com \
--cc=quic_msarkar@quicinc.com \
--cc=quic_qianyu@quicinc.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox