public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Matthew Gerlach <matthew.gerlach@linux.intel.com>
To: lpieralisi@kernel.org, kw@linux.com,
	manivannan.sadhasivam@linaro.org, robh@kernel.org,
	bhelgaas@google.com, krzk+dt@kernel.org, conor+dt@kernel.org,
	dinguyen@kernel.org, joyce.ooi@intel.com,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: matthew.gerlach@altera.com,
	Matthew Gerlach <matthew.gerlach@linux.intel.com>
Subject: [PATCH v3 3/5] arm64: dts: agilex: add dtsi for PCIe Root Port
Date: Wed,  8 Jan 2025 10:59:07 -0600	[thread overview]
Message-ID: <20250108165909.3344354-4-matthew.gerlach@linux.intel.com> (raw)
In-Reply-To: <20250108165909.3344354-1-matthew.gerlach@linux.intel.com>

Add the base device tree for support of the PCIe Root Port
for the Agilex family of chips.

Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
---
v3:
 - Remove accepted patches from patch set.

v2:
 - Rename node to fix schema check error.
---
 .../intel/socfpga_agilex_pcie_root_port.dtsi  | 55 +++++++++++++++++++
 1 file changed, 55 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi

diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi
new file mode 100644
index 000000000000..50f131f5791b
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex_pcie_root_port.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2024, Intel Corporation
+ */
+&soc0 {
+	aglx_hps_bridges: fpga-bus@80000000 {
+		compatible = "simple-bus";
+		reg = <0x80000000 0x20200000>,
+		      <0xf9000000 0x00100000>;
+		reg-names = "axi_h2f", "axi_h2f_lw";
+		#address-cells = <0x2>;
+		#size-cells = <0x1>;
+		ranges = <0x00000000 0x00000000 0x80000000 0x00040000>,
+			 <0x00000000 0x10000000 0x90100000 0x0ff00000>,
+			 <0x00000000 0x20000000 0xa0000000 0x00200000>,
+			 <0x00000001 0x00010000 0xf9010000 0x00008000>,
+			 <0x00000001 0x00018000 0xf9018000 0x00000080>,
+			 <0x00000001 0x00018080 0xf9018080 0x00000010>;
+
+		pcie_0_pcie_aglx: pcie@200000000 {
+			reg = <0x00000000 0x10000000 0x10000000>,
+			      <0x00000001 0x00010000 0x00008000>,
+			      <0x00000000 0x20000000 0x00200000>;
+			reg-names = "Txs", "Cra", "Hip";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 0x14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <0x1>;
+			device_type = "pci";
+			bus-range = <0x0000000 0x000000ff>;
+			ranges = <0x82000000 0x00000000 0x00100000 0x00000000 0x10000000 0x00000000 0x0ff00000>;
+			msi-parent = <&pcie_0_msi_irq>;
+			#address-cells = <0x3>;
+			#size-cells = <0x2>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0x0 0x0 0x0 0x1 &pcie_0_pcie_aglx 0 0 0 0x1>,
+					<0x0 0x0 0x0 0x2 &pcie_0_pcie_aglx 0 0 0 0x2>,
+					<0x0 0x0 0x0 0x3 &pcie_0_pcie_aglx 0 0 0 0x3>,
+					<0x0 0x0 0x0 0x4 &pcie_0_pcie_aglx 0 0 0 0x4>;
+			status = "disabled";
+		};
+
+		pcie_0_msi_irq: msi@10008080 {
+			compatible = "altr,msi-1.0";
+			reg = <0x00000001 0x00018080 0x00000010>,
+			      <0x00000001 0x00018000 0x00000080>;
+			reg-names = "csr", "vector_slave";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_SPI 0x13 IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			num-vectors = <0x20>;
+			status = "disabled";
+		};
+	};
+};
-- 
2.34.1


  parent reply	other threads:[~2025-01-08 17:02 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-01-08 16:59 [PATCH v3 0/5] Add PCIe Root Port support for Agilex family of chips Matthew Gerlach
2025-01-08 16:59 ` [PATCH v3 1/5] dt-bindings: PCI: altera: Add binding for Agilex Matthew Gerlach
2025-01-08 16:59 ` [PATCH v3 2/5] arm64: dts: agilex: add soc0 label Matthew Gerlach
2025-01-08 16:59 ` Matthew Gerlach [this message]
2025-01-08 18:37   ` [PATCH v3 3/5] arm64: dts: agilex: add dtsi for PCIe Root Port Bjorn Helgaas
2025-01-08 22:53     ` matthew.gerlach
2025-01-08 23:05       ` Bjorn Helgaas
2025-01-08 16:59 ` [PATCH v3 4/5] arm64: dts: agilex: add dts enabling " Matthew Gerlach
2025-01-08 16:59 ` [PATCH v3 5/5] PCI: altera: Add Agilex support Matthew Gerlach
2025-01-16 17:05   ` Manivannan Sadhasivam
2025-01-17 19:09     ` matthew.gerlach
2025-01-17 21:09       ` matthew.gerlach
2025-01-08 22:34 ` [PATCH v3 0/5] Add PCIe Root Port support for Agilex family of chips Rob Herring (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250108165909.3344354-4-matthew.gerlach@linux.intel.com \
    --to=matthew.gerlach@linux.intel.com \
    --cc=bhelgaas@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=joyce.ooi@intel.com \
    --cc=krzk+dt@kernel.org \
    --cc=kw@linux.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --cc=matthew.gerlach@altera.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox