From: Kartik Rajput <kkartik@nvidia.com>
To: <linus.walleij@linaro.org>, <brgl@bgdev.pl>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <devicetree@vger.kernel.org>
Cc: Prathamesh Shete <pshete@nvidia.com>,
Nathan Hartman <nhartman@nvidia.com>,
Kartik Rajput <kkartik@nvidia.com>
Subject: [PATCH v3 2/2] gpio: tegra186: Add support for Tegra410
Date: Fri, 10 Oct 2025 14:59:13 +0530 [thread overview]
Message-ID: <20251010092913.711906-2-kkartik@nvidia.com> (raw)
In-Reply-To: <20251010092913.711906-1-kkartik@nvidia.com>
From: Prathamesh Shete <pshete@nvidia.com>
Extend the existing Tegra186 GPIO controller driver with support for
the GPIO controller found on Tegra410. Tegra410 supports two GPIO
controllers referred to as 'COMPUTE' and 'SYSTEM'.
Co-developed-by: Nathan Hartman <nhartman@nvidia.com>
Signed-off-by: Nathan Hartman <nhartman@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Kartik Rajput <kkartik@nvidia.com>
---
v2 -> v3:
* Add a generic TEGRA_GPIO_PORT macro and use it to define
TEGRA410_COMPUTE_GPIO_PORT and TEGRA410_SYSTEM_GPIO_PORT.
v1 -> v2:
* Move Tegra410 GPIO Ports definition to gpio-tegra186.c
* Rename Tegra410 Main GPIO as System GPIO.
* Add Compute GPIOs.
* Update ACPI IDs.
* Set instance ID as 0 for SYSTEM and COMPUTE GPIOs.
* Added Nathan as co-author for adding compute GPIO support
and renaming MAIN GPIOs as SYSTEM GPIOs.
---
drivers/gpio/gpio-tegra186.c | 82 +++++++++++++++++++++++++++++++++++-
1 file changed, 81 insertions(+), 1 deletion(-)
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 7ea541d6d537..c6ebe29f9cf1 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2016-2022 NVIDIA Corporation
+ * Copyright (c) 2016-2025 NVIDIA Corporation
*
* Author: Thierry Reding <treding@nvidia.com>
* Dipen Patel <dpatel@nvidia.com>
@@ -69,6 +69,36 @@
#define TEGRA186_GPIO_INTERRUPT_STATUS(x) (0x100 + (x) * 4)
+/* Tegra410 GPIOs implemented by the COMPUTE GPIO controller */
+#define TEGRA410_COMPUTE_GPIO_PORT_A 0
+#define TEGRA410_COMPUTE_GPIO_PORT_B 1
+#define TEGRA410_COMPUTE_GPIO_PORT_C 2
+#define TEGRA410_COMPUTE_GPIO_PORT_D 3
+#define TEGRA410_COMPUTE_GPIO_PORT_E 4
+
+#define TEGRA410_COMPUTE_GPIO(port, offset) \
+ ((TEGRA410_COMPUTE_GPIO_PORT_##port * 8) + (offset))
+
+/* Tegra410 GPIOs implemented by the SYSTEM GPIO controller */
+#define TEGRA410_SYSTEM_GPIO_PORT_A 0
+#define TEGRA410_SYSTEM_GPIO_PORT_B 1
+#define TEGRA410_SYSTEM_GPIO_PORT_C 2
+#define TEGRA410_SYSTEM_GPIO_PORT_D 3
+#define TEGRA410_SYSTEM_GPIO_PORT_E 4
+#define TEGRA410_SYSTEM_GPIO_PORT_I 5
+#define TEGRA410_SYSTEM_GPIO_PORT_J 6
+#define TEGRA410_SYSTEM_GPIO_PORT_K 7
+#define TEGRA410_SYSTEM_GPIO_PORT_L 8
+#define TEGRA410_SYSTEM_GPIO_PORT_M 9
+#define TEGRA410_SYSTEM_GPIO_PORT_N 10
+#define TEGRA410_SYSTEM_GPIO_PORT_P 11
+#define TEGRA410_SYSTEM_GPIO_PORT_Q 12
+#define TEGRA410_SYSTEM_GPIO_PORT_R 13
+#define TEGRA410_SYSTEM_GPIO_PORT_V 14
+
+#define TEGRA410_SYSTEM_GPIO(port, offset) \
+ ((TEGRA410_SYSTEM_GPIO_PORT_##port * 8) + (offset))
+
struct tegra_gpio_port {
const char *name;
unsigned int bank;
@@ -1267,6 +1297,54 @@ static const struct tegra_gpio_soc tegra256_main_soc = {
.has_vm_support = true,
};
+#define TEGRA410_COMPUTE_GPIO_PORT(_name, _bank, _port, _pins) \
+ TEGRA_GPIO_PORT(TEGRA410_COMPUTE, _name, _bank, _port, _pins)
+
+static const struct tegra_gpio_port tegra410_compute_ports[] = {
+ TEGRA410_COMPUTE_GPIO_PORT(A, 0, 0, 3),
+ TEGRA410_COMPUTE_GPIO_PORT(B, 1, 0, 8),
+ TEGRA410_COMPUTE_GPIO_PORT(C, 1, 1, 3),
+ TEGRA410_COMPUTE_GPIO_PORT(D, 2, 0, 8),
+ TEGRA410_COMPUTE_GPIO_PORT(E, 2, 1, 8),
+};
+
+static const struct tegra_gpio_soc tegra410_compute_soc = {
+ .num_ports = ARRAY_SIZE(tegra410_compute_ports),
+ .ports = tegra410_compute_ports,
+ .name = "tegra410-gpio-compute",
+ .num_irqs_per_bank = 8,
+ .instance = 0,
+};
+
+#define TEGRA410_SYSTEM_GPIO_PORT(_name, _bank, _port, _pins) \
+ TEGRA_GPIO_PORT(TEGRA410_SYSTEM, _name, _bank, _port, _pins)
+
+static const struct tegra_gpio_port tegra410_system_ports[] = {
+ TEGRA410_SYSTEM_GPIO_PORT(A, 0, 0, 7),
+ TEGRA410_SYSTEM_GPIO_PORT(B, 0, 1, 8),
+ TEGRA410_SYSTEM_GPIO_PORT(C, 0, 2, 8),
+ TEGRA410_SYSTEM_GPIO_PORT(D, 0, 3, 8),
+ TEGRA410_SYSTEM_GPIO_PORT(E, 0, 4, 6),
+ TEGRA410_SYSTEM_GPIO_PORT(I, 1, 0, 8),
+ TEGRA410_SYSTEM_GPIO_PORT(J, 1, 1, 7),
+ TEGRA410_SYSTEM_GPIO_PORT(K, 1, 2, 7),
+ TEGRA410_SYSTEM_GPIO_PORT(L, 1, 3, 7),
+ TEGRA410_SYSTEM_GPIO_PORT(M, 2, 0, 7),
+ TEGRA410_SYSTEM_GPIO_PORT(N, 2, 1, 6),
+ TEGRA410_SYSTEM_GPIO_PORT(P, 2, 2, 8),
+ TEGRA410_SYSTEM_GPIO_PORT(Q, 2, 3, 3),
+ TEGRA410_SYSTEM_GPIO_PORT(R, 2, 4, 2),
+ TEGRA410_SYSTEM_GPIO_PORT(V, 1, 4, 2),
+};
+
+static const struct tegra_gpio_soc tegra410_system_soc = {
+ .num_ports = ARRAY_SIZE(tegra410_system_ports),
+ .ports = tegra410_system_ports,
+ .name = "tegra410-gpio-system",
+ .num_irqs_per_bank = 8,
+ .instance = 0,
+};
+
static const struct of_device_id tegra186_gpio_of_match[] = {
{
.compatible = "nvidia,tegra186-gpio",
@@ -1302,6 +1380,8 @@ static const struct acpi_device_id tegra186_gpio_acpi_match[] = {
{ .id = "NVDA0408", .driver_data = (kernel_ulong_t)&tegra194_aon_soc },
{ .id = "NVDA0508", .driver_data = (kernel_ulong_t)&tegra241_main_soc },
{ .id = "NVDA0608", .driver_data = (kernel_ulong_t)&tegra241_aon_soc },
+ { .id = "NVDA0708", .driver_data = (kernel_ulong_t)&tegra410_compute_soc },
+ { .id = "NVDA0808", .driver_data = (kernel_ulong_t)&tegra410_system_soc },
{}
};
MODULE_DEVICE_TABLE(acpi, tegra186_gpio_acpi_match);
--
2.43.0
next prev parent reply other threads:[~2025-10-10 9:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-10 9:29 [PATCH v3 1/2] gpio: tegra186: Use generic macro for port definitions Kartik Rajput
2025-10-10 9:29 ` Kartik Rajput [this message]
2025-10-10 10:04 ` [PATCH v3 2/2] gpio: tegra186: Add support for Tegra410 Jon Hunter
2025-10-10 10:09 ` Kartik Rajput
2025-10-10 9:33 ` [PATCH v3 1/2] gpio: tegra186: Use generic macro for port definitions Jon Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20251010092913.711906-2-kkartik@nvidia.com \
--to=kkartik@nvidia.com \
--cc=brgl@bgdev.pl \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=nhartman@nvidia.com \
--cc=pshete@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox