From: Krzysztof Kozlowski <krzk@kernel.org>
To: Alex Elder <elder@riscstar.com>
Cc: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
kuba@kernel.org, pabeni@redhat.com,
maxime.chevallier@bootlin.com, rmk+kernel@armlinux.org.uk,
andersson@kernel.org, konradybcio@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, linusw@kernel.org,
brgl@kernel.org, arnd@arndb.de, gregkh@linuxfoundation.org,
Daniel Thompson <daniel@riscstar.com>,
mohd.anwar@oss.qualcomm.com, a0987203069@gmail.com,
alexandre.torgue@foss.st.com, ast@kernel.org,
boon.khai.ng@altera.com, chenchuangyu@xiaomi.com,
chenhuacai@kernel.org, daniel@iogearbox.net, hawk@kernel.org,
hkallweit1@gmail.com, inochiama@gmail.com,
john.fastabend@gmail.com, julianbraha@gmail.com,
livelycarpet87@gmail.com, matthew.gerlach@altera.com,
mcoquelin.stm32@gmail.com, me@ziyao.cc,
prabhakar.mahadev-lad.rj@bp.renesas.com,
richardcochran@gmail.com, rohan.g.thomas@altera.com,
sdf@fomichev.me, siyanteng@cqsoftware.com.cn,
weishangjuan@eswincomputing.com, wens@kernel.org,
netdev@vger.kernel.org, bpf@vger.kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-gpio@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net-next 08/12] dt-bindings: net: toshiba,tc965x-dwmac: add TC956x Ethernet bridge
Date: Mon, 4 May 2026 13:00:07 +0200 [thread overview]
Message-ID: <20260504-fascinating-teal-tarsier-b116c8@quoll> (raw)
In-Reply-To: <20260501155421.3329862-9-elder@riscstar.com>
On Fri, May 01, 2026 at 10:54:16AM -0500, Alex Elder wrote:
> From: Daniel Thompson <daniel@riscstar.com>
>
> Add devicetree bindings for the Toshiba TC956x family of Ethernet-AVB/TSN
> bridges.
>
> Signed-off-by: Daniel Thompson <daniel@riscstar.com>
> Signed-off-by: Alex Elder <elder@riscstar.com>
> ---
> .../bindings/net/toshiba,tc956x-dwmac.yaml | 111 ++++++++++++++++++
> 1 file changed, 111 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/net/toshiba,tc956x-dwmac.yaml
>
> diff --git a/Documentation/devicetree/bindings/net/toshiba,tc956x-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,tc956x-dwmac.yaml
> new file mode 100644
> index 0000000000000..d95d22a3761da
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/toshiba,tc956x-dwmac.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/toshiba,tc956x-dwmac.yaml#
Filename and here: toshiba,tc9564-dwmac
(s/x/4/)
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba TC956x Ethernet-AVB/TSN Controller
> +
> +maintainers:
> + - Alex Elder <elder@riscstar.com>
> + - Daniel Thompson <daniel@riscstar.com>
> +
> +description: |
> + This node provides properties for configuring the Ethernet PCI functions
> + that are attached to the internal downstream port of the TC956x's PCIe
> + switch.
Describe rather the hardware directly, not the DTS or the binding
itself.
Just say what is the hardware, what is consists of, what is less
obvious or usual (if there is such).
> +
> + TC956x are a family of Ethernet-AVB/TSN bridge chips that combine a PCIe
> + switch together with a number of Ethernet controllers. These bindings
> + cover only the Ethernet functions of these devices.
What about the rest of the hardware - a PCIe switch? Shouldn't it be
described?
> +
> +allOf:
> + - $ref: /schemas/pci/pci-bus-common.yaml#
> + - $ref: /schemas/pci/pci-device.yaml#
> +
> +unevaluatedProperties: false
Place both (allOf+unevaluatedProperties) after "required:".
> +
> +properties:
> + compatible:
> + enum:
> + - pci1179,0220 # Toshiba TC9564 (a.k.a. Qualcomm QPS615)
> +
> + "#gpio-cells":
> + const: 2
> +
> + gpio-controller: true
> +
> + # We can't allOf reference Ethernet-controller.yaml because we end up with
s/Ethernet-controller.yaml/ethernet-controller.yaml/
> + # contradictory $nodename rules (`ethernet@` versus `pci@`). Happily only a
But which schema requires pci@ for devices? If I am not mistaken, only
dtschema/schemas/pci/pci-bus-common.yaml requires it, and it does not
apply to actual PCI device.
> + # small number of the properties are useful on TC956x so we can just reference
> + # what we need.
> + phy-connection-type:
> + $ref: ethernet-controller.yaml#/properties/phy-connection-type
> +
> + phy-handle:
> + $ref: ethernet-controller.yaml#/properties/phy-handle
> +
> + phy-mode:
> + $ref: ethernet-controller.yaml#/properties/phy-mode
> +
> + mdio:
> + $ref: snps,dwmac.yaml#/properties/mdio
> +
> +required:
> + - compatible
> + - reg
> +
> +examples:
> + - |
> + pcie {
> + #address-cells = <3>;
> + #size-cells = <2>;
> +
> + tc956x_emac0: pci@0,0 {
> + compatible = "pci1179,0220";
> + reg = <0x50000 0x0 0x0 0x0 0x0>;
> + #address-cells = <3>;
> + #size-cells = <2>;
> + device_type = "pci";
> + ranges;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + phy-mode = "10gbase-r";
> + phy-handle = <&tc956x_emac0_phy>;
> +
> + mdio {
> + compatible = "snps,dwmac-mdio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + tc956x_emac0_phy: ethernet-phy@1c {
> + compatible = "ethernet-phy-id311c.1c12";
> + reg = <0x1c>;
> + };
> + };
> + };
Keep only one example, unless you have different properties (not their
values, but their presence),
Best regards,
Krzysztof
next prev parent reply other threads:[~2026-05-04 11:00 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-01 15:54 [PATCH net-next 00/12] net: enable TC956x support Alex Elder
2026-05-01 15:54 ` [PATCH net-next 01/12] net: pcs: pcs-xpcs-regmap: support XPCS memory-mapped MDIO bus via regmap Alex Elder
2026-05-01 15:54 ` [PATCH net-next 02/12] net: pcs: pcs-xpcs: select operating mode for 10G-baseR capable PCS Alex Elder
2026-05-01 16:50 ` Andrew Lunn
2026-05-01 18:07 ` Alex Elder
2026-05-01 15:54 ` [PATCH net-next 03/12] net: pcs: pcs-xpcs: Preserve BMCR_ANENBLE during link up Alex Elder
2026-05-01 17:06 ` Andrew Lunn
2026-05-01 15:54 ` [PATCH net-next 04/12] net: stmmac: dma: create a separate dma_device pointer Alex Elder
2026-05-01 17:13 ` Andrew Lunn
2026-05-01 18:06 ` Alex Elder
2026-05-01 20:55 ` Andrew Lunn
2026-05-04 13:36 ` Alex Elder
2026-05-01 15:54 ` [PATCH net-next 05/12] net: stmmac: dwxgmac2: Add multi MSI interrupt mode Alex Elder
2026-05-01 17:21 ` Andrew Lunn
2026-05-01 15:54 ` [PATCH net-next 06/12] net: stmmac: dwxgmac2: Add XGMAC 3.01a support Alex Elder
2026-05-01 15:54 ` [PATCH net-next 07/12] net: stmmac: dwxgmac2: export symbols for XGMAC 3.01a DMA Alex Elder
2026-05-01 15:54 ` [PATCH net-next 08/12] dt-bindings: net: toshiba,tc965x-dwmac: add TC956x Ethernet bridge Alex Elder
2026-05-01 17:38 ` Andrew Lunn
2026-05-03 2:22 ` Alex Elder
2026-05-04 11:00 ` Krzysztof Kozlowski [this message]
2026-05-04 13:34 ` Alex Elder
2026-05-01 15:54 ` [PATCH net-next 09/12] gpio: tc956x: add TC956x/QPS615 support Alex Elder
2026-05-01 18:36 ` Andrew Lunn
2026-05-03 1:45 ` Alex Elder
2026-05-03 2:48 ` Andrew Lunn
2026-05-03 3:05 ` Andrew Lunn
2026-05-03 3:42 ` Julian Braha
2026-05-04 12:46 ` Bartosz Golaszewski
2026-05-04 13:07 ` Alex Elder
2026-05-01 15:54 ` [PATCH net-next 10/12] net: stmmac: " Alex Elder
2026-05-01 19:04 ` Andrew Lunn
2026-05-01 15:54 ` [PATCH net-next 11/12] misc: tc956x_pci: " Alex Elder
2026-05-01 21:07 ` Andrew Lunn
2026-05-03 2:06 ` Alex Elder
2026-05-02 16:45 ` Jakub Kicinski
2026-05-03 2:06 ` Alex Elder
2026-05-03 2:14 ` Jakub Kicinski
2026-05-03 2:23 ` Alex Elder
2026-05-01 15:54 ` [PATCH net-next 12/12] arm64: dts: qcom: qcs6490-rb3gen2: enable TC9564 with a single QCS8081 phy Alex Elder
2026-05-01 21:09 ` Andrew Lunn
2026-05-02 16:47 ` [PATCH net-next 00/12] net: enable TC956x support Jakub Kicinski
2026-05-03 2:07 ` Alex Elder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260504-fascinating-teal-tarsier-b116c8@quoll \
--to=krzk@kernel.org \
--cc=a0987203069@gmail.com \
--cc=alexandre.torgue@foss.st.com \
--cc=andersson@kernel.org \
--cc=andrew+netdev@lunn.ch \
--cc=arnd@arndb.de \
--cc=ast@kernel.org \
--cc=boon.khai.ng@altera.com \
--cc=bpf@vger.kernel.org \
--cc=brgl@kernel.org \
--cc=chenchuangyu@xiaomi.com \
--cc=chenhuacai@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel@iogearbox.net \
--cc=daniel@riscstar.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=elder@riscstar.com \
--cc=gregkh@linuxfoundation.org \
--cc=hawk@kernel.org \
--cc=hkallweit1@gmail.com \
--cc=inochiama@gmail.com \
--cc=john.fastabend@gmail.com \
--cc=julianbraha@gmail.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=livelycarpet87@gmail.com \
--cc=matthew.gerlach@altera.com \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=me@ziyao.cc \
--cc=mohd.anwar@oss.qualcomm.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=richardcochran@gmail.com \
--cc=rmk+kernel@armlinux.org.uk \
--cc=robh@kernel.org \
--cc=rohan.g.thomas@altera.com \
--cc=sdf@fomichev.me \
--cc=siyanteng@cqsoftware.com.cn \
--cc=weishangjuan@eswincomputing.com \
--cc=wens@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox