Re: [PATCH net-next 02/12] net: pcs: pcs-xpcs: select operating mode for 10G-baseR capable PCS

[Daniel Thompson <daniel@riscstar.com>]

On Fri, May 01, 2026 at 06:50:45PM +0200, Andrew Lunn wrote:
> > +static int xpcs_config_operating_mode(struct dw_xpcs *xpcs, int an_mode)
> > +{
> > +	int mdio_stat2, ret;
> > +
> > +	switch (an_mode) {
> > +	case DW_AN_C37_SGMII:
> > +	case DW_AN_C37_1000BASEX:
> > +	case DW_2500BASEX:
> > +		mdio_stat2 = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT2);
> > +		if (mdio_stat2 < 0)
> > +			return mdio_stat2;
> > +
> > +		/*
> > +		 * If this XPCS supports 10Gbase-R then it will be the default
> > +		 * which prevents 1000base-X and slower from working correctly.
>
> It would be interesting to know if Toshiba messed up the integration
> of the PCS, or there is an errata for the licensed IP.

I'm afraid I don't know, but it looks like the issue is not unique to
Toshiba!

This is a discovery which, rather to my chagrin, I only made after we
posted the patches (thanks to a hint from Sashiko): there is similar
code in txgbe_xpcs_switch_mode(). I cleary overlooked that when I
originally reviewed the existing XPCS code. I suspect I stopped
scanning that code path due to the PMA related conditional branch...

Regardless of how I missed it, txgbe_xpcs_switch_mode() implements
similar logic to this patch. I think it is using MDIO_PCS_CTRL2_10GBX as
the Reserved value but otherwise looks similar. There are comments that
imply 10Gbase-X isn't implemented by their XPCS which would make
MDIO_PCS_CTRL2_10GBX reserved (but are too vague to be 100% sure).

Right now it looks like xpcs_switch_interface_mode() and my
xpcs_config_operating_mode() are more closely related than I realized
so I plan to move my code into xpcs_switch_interface_mode().

I don't think I can unify the Wangxun and Toshiba code (the waits and
resets in the Wangxun code make that too high risk) but I'm not yet
ready to give up and just make the Toshiba changes into another vendor
quirk!


Daniel.