public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
* [PATCH 0/1] aspeed: msx4: enable BMC networking via MAC0
@ 2026-05-05  5:05 Ender Hsieh
  2026-05-05  5:05 ` [PATCH 1/1] ARM: dts: " Ender Hsieh
  0 siblings, 1 reply; 2+ messages in thread
From: Ender Hsieh @ 2026-05-05  5:05 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Joel Stanley,
	Andrew Jeffery
  Cc: devicetree, linux-arm-kernel, linux-aspeed, linux-kernel,
	Andrew Lunn, Marc Olberding, Jacky Chou

Add the &mac0/&mdio3/ethphy3 nodes to the NVIDIA MSX4 board dts to
enable BMC networking. These nodes were intentionally omitted in
commit f28674fab34f ("ARM: dts: aspeed: Add NVIDIA MSX4 HPM") at
Andrew Lunn's request, pending RGMII delay handling clarification.

Following his guidance on linux-aspeed [1], the U-Boot bootloader
has been modified to stop enabling MAC clock delays on the SoC
side. With phy-mode = "rgmii-id", the PHY now adds the required
~2ns delay without any double-delay from the MAC controller.

Tested on alon8 hardware: 1G link negotiation succeeds with this
change in coordination with the U-Boot patch [2].

[1] https://patch.msgid.link/eac09481-0ba1-4ac2-ad8c-d859822ff0d5@lunn.ch
[2] https://patch.msgid.link/20260504044702.2613879-1-andhsieh@nvidia.com

Ender Hsieh (1):
  ARM: dts: aspeed: msx4: enable BMC networking via MAC0

 .../dts/aspeed/aspeed-bmc-nvidia-msx4-bmc.dts     | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

-- 
2.34.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-05-05  5:06 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-05-05  5:05 [PATCH 0/1] aspeed: msx4: enable BMC networking via MAC0 Ender Hsieh
2026-05-05  5:05 ` [PATCH 1/1] ARM: dts: " Ender Hsieh

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox