From: Matthew Leung <matthew.leung@oss.qualcomm.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Matthew Leung <matthew.leung@oss.qualcomm.com>
Subject: [PATCH 07/10] phy: qcom-qmp: qserdes-txrx: Add v10.60 register offsets
Date: Fri, 08 May 2026 23:31:22 +0000 [thread overview]
Message-ID: <20260508-hawi-phy-pcie-v1-7-237b894353fc@oss.qualcomm.com> (raw)
In-Reply-To: <20260508-hawi-phy-pcie-v1-0-237b894353fc@oss.qualcomm.com>
Hawi SoC bumps the HW version of QMP phy to v10.60 for PCIe. Add the new
qserdes TX RX offsets in a dedicated header file.
Signed-off-by: Matthew Leung <matthew.leung@oss.qualcomm.com>
---
.../qualcomm/phy-qcom-qmp-qserdes-txrx-v10_60.h | 109 +++++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 110 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v10_60.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v10_60.h
new file mode 100644
index 000000000000..3150a494685e
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v10_60.h
@@ -0,0 +1,109 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_V10_60_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_V10_60_H_
+
+#define QSERDES_V10_60_TXRX_RES_CODE_LANE_OFFSET_TX 0x034
+#define QSERDES_V10_60_TXRX_RES_CODE_LANE_OFFSET_RX 0x038
+#define QSERDES_V10_60_TXRX_LANE_MODE_1 0x080
+#define QSERDES_V10_60_TXRX_LANE_MODE_2 0x084
+#define QSERDES_V10_60_TXRX_LANE_MODE_3 0x088
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_FO_GAIN_RATE1 0x0c8
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_FO_GAIN_RATE2 0x0cc
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_FO_GAIN_RATE3 0x0d0
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_FO_GAIN_RATE4 0x0d4
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_SO_GAIN_RATE1 0x0e0
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_SO_GAIN_RATE2 0x0e4
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_SO_GAIN_RATE3 0x0e8
+#define QSERDES_V10_60_TXRX_UCDR_FASTLOCK_SO_GAIN_RATE4 0x0ec
+#define QSERDES_V10_60_TXRX_UCDR_PI_CTRL1 0x12c
+#define QSERDES_V10_60_TXRX_UCDR_PI_CTRL2 0x130
+#define QSERDES_V10_60_TXRX_UCDR_PI_CTRL3 0x134
+#define QSERDES_V10_60_TXRX_UCDR_PI_CTRL4 0x138
+#define QSERDES_V10_60_TXRX_SVS_MODE_CTRL 0x19c
+#define QSERDES_V10_60_TXRX_RXCLK_DIV2_CTRL 0x1a0
+#define QSERDES_V10_60_TXRX_RX_BAND_CTRL0 0x1a4
+#define QSERDES_V10_60_TXRX_RX_TERM_BW_CTRL0 0x1ac
+#define QSERDES_V10_60_TXRX_RX_TERM_BW_CTRL1 0x1b0
+#define QSERDES_V10_60_TXRX_UCDR_FO_GAIN_RATE1 0x1b8
+#define QSERDES_V10_60_TXRX_UCDR_FO_GAIN_RATE2 0x1bc
+#define QSERDES_V10_60_TXRX_UCDR_FO_GAIN_RATE3 0x1c0
+#define QSERDES_V10_60_TXRX_UCDR_FO_GAIN_RATE4 0x1c4
+#define QSERDES_V10_60_TXRX_UCDR_SO_GAIN_RATE1 0x1d0
+#define QSERDES_V10_60_TXRX_UCDR_SO_GAIN_RATE2 0x1d4
+#define QSERDES_V10_60_TXRX_UCDR_SO_GAIN_RATE3 0x1d8
+#define QSERDES_V10_60_TXRX_UCDR_SO_GAIN_RATE4 0x1dc
+#define QSERDES_V10_60_TXRX_UCDR_PI_CONTROLS 0x1e4
+#define QSERDES_V10_60_TXRX_AUXDATA_BIN_RATE3 0x200
+#define QSERDES_V10_60_TXRX_AUXDATA_BIN_RATE4 0x204
+#define QSERDES_V10_60_TXRX_EOM_MAX_ERR_LIMIT_LSB 0x218
+#define QSERDES_V10_60_TXRX_EOM_MAX_ERR_LIMIT_MSB 0x21c
+#define QSERDES_V10_60_TXRX_VGA_CAL_CNTRL1 0x280
+#define QSERDES_V10_60_TXRX_VGA_CAL_MAN_VAL 0x288
+#define QSERDES_V10_60_TXRX_GM_CAL 0x29c
+#define QSERDES_V10_60_TXRX_RX_EQU_ADAPTOR_CNTRL6 0x2b8
+#define QSERDES_V10_60_TXRX_SIGDET_ENABLES 0x2d4
+#define QSERDES_V10_60_TXRX_SIGDET_CNTRL 0x2d8
+#define QSERDES_V10_60_TXRX_SIGDET_LVL 0x2dc
+#define QSERDES_V10_60_TXRX_SIGDET_DEGLITCH_CNTRL 0x2e0
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B0 0x314
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B1 0x318
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B2 0x31c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B3 0x320
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B4 0x324
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B5 0x328
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B6 0x32c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B7 0x330
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B8 0x334
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B9 0x338
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE_0_1_B10 0x33c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B0 0x340
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B1 0x344
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B2 0x348
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B3 0x34c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B4 0x350
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B5 0x354
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B6 0x358
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B7 0x35c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B8 0x360
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B9 0x364
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE2_B10 0x368
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B0 0x36c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B1 0x370
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B2 0x374
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B3 0x378
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B4 0x37c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B5 0x380
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B6 0x384
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B7 0x388
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B8 0x38c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B9 0x390
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE3_B10 0x394
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B0 0x398
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B1 0x39c
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B2 0x3a0
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B3 0x3a4
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B4 0x3a8
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B5 0x3ac
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B6 0x3b0
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B7 0x3b4
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B8 0x3b8
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B9 0x3bc
+#define QSERDES_V10_60_TXRX_RX_MODE_RATE4_SA_B10 0x3c0
+#define QSERDES_V10_60_TXRX_Q_PI_INTRINSIC_BIAS_RATE32 0x478
+#define QSERDES_V10_60_TXRX_Q_PI_INTRINSIC_BIAS_RATE45 0x47c
+#define QSERDES_V10_60_TXRX_SIGDET_CAL_CTRL1 0x4c8
+#define QSERDES_V10_60_TXRX_SIGDET_CAL_CTRL2 0x4cc
+#define QSERDES_V10_60_TXRX_SIGDET_CAL_TRIM 0x4d0
+#define QSERDES_V10_60_TXRX_TX_BAND0 0x4e8
+#define QSERDES_V10_60_TXRX_TX_BAND1 0x4ec
+#define QSERDES_V10_60_TXRX_SEL_10B_8B 0x4f4
+#define QSERDES_V10_60_TXRX_SEL_20B_10B 0x4f8
+#define QSERDES_V10_60_TXRX_EQ_RCF_CTRL_RATE3 0x53c
+#define QSERDES_V10_60_TXRX_EQ_RCF_CTRL_RATE4 0x540
+#define QSERDES_V10_60_TXRX_PHPRE_CTRL 0x5e8
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 85da2581ef90..e461a000da48 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -43,6 +43,7 @@
#include "phy-qcom-qmp-qserdes-txrx-v10.h"
#include "phy-qcom-qmp-qserdes-com-v10_60.h"
+#include "phy-qcom-qmp-qserdes-txrx-v10_60.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
next prev parent reply other threads:[~2026-05-08 23:31 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 23:31 [PATCH 00/10] phy: qcom: qmp-pcie: Add PCIe PHY support for Hawi Matthew Leung
2026-05-08 23:31 ` [PATCH 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add Hawi compatibles Matthew Leung
2026-05-08 23:31 ` [PATCH 02/10] phy: qcom-qmp: qserdes-com: Add v10 register offsets Matthew Leung
2026-05-08 23:31 ` [PATCH 03/10] phy: qcom-qmp: qserdes-txrx: " Matthew Leung
2026-05-08 23:31 ` [PATCH 04/10] phy: qcom-qmp: pcs: " Matthew Leung
2026-05-08 23:31 ` [PATCH 05/10] phy: qcom-qmp: pcs-pcie: " Matthew Leung
2026-05-08 23:31 ` [PATCH 06/10] phy: qcom-qmp: qserdes-com: Add v10.60 " Matthew Leung
2026-05-08 23:31 ` Matthew Leung [this message]
2026-05-08 23:31 ` [PATCH 08/10] phy: qcom-qmp: pcs: " Matthew Leung
2026-05-08 23:31 ` [PATCH 09/10] phy: qcom-qmp: pcs-pcie: " Matthew Leung
2026-05-08 23:38 ` sashiko-bot
2026-05-08 23:31 ` [PATCH 10/10] phy: qcom: qmp-pcie: Add QMP PCIe PHY support for Hawi Matthew Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260508-hawi-phy-pcie-v1-7-237b894353fc@oss.qualcomm.com \
--to=matthew.leung@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox