[PATCH 08/10] phy: qcom-qmp: pcs: Add v10.60 register offsets

[Matthew Leung <matthew.leung@oss.qualcomm.com>]

Hawi SoC bumps up the HW version of QMP phy to v10.60 for PCIe Gen4 x1.
Add the new PCS offsets in a dedicated header file.

Signed-off-by: Matthew Leung <matthew.leung@oss.qualcomm.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v10_60.h | 23 +++++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp.h            |  2 ++
 2 files changed, 25 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v10_60.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v10_60.h
new file mode 100644
index 000000000000..fe0279ac4e4d
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v10_60.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V10_60_H_
+#define QCOM_PHY_QMP_PCS_V10_60_H_
+
+/* Only for QMP V10_60 PHY - USB/PCIe PCS registers */
+#define QPHY_V10_60_PCS_SW_RESET			0x000
+#define QPHY_V10_60_PCS_PCS_STATUS1			0x014
+#define QPHY_V10_60_PCS_POWER_DOWN_CONTROL		0x040
+#define QPHY_V10_60_PCS_START_CONTROL			0x044
+#define QPHY_V10_60_PCS_G12S1_TXDEEMPH_M6DB		0x170
+#define QPHY_V10_60_PCS_G3S2_PRE_GAIN			0x178
+#define QPHY_V10_60_PCS_RX_SIGDET_LVL			0x190
+#define QPHY_V10_60_PCS_ELECIDLE_DLY_SEL		0x1b8
+#define QPHY_V10_60_PCS_PCS_TX_RX_CONFIG1		0x1dc
+#define QPHY_V10_60_PCS_PCS_TX_RX_CONFIG2		0x1e0
+#define QPHY_V10_60_PCS_EQ_CONFIG4			0x1f8
+#define QPHY_V10_60_PCS_EQ_CONFIG5			0x1fc
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index e461a000da48..3a4a0a9a9e4d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -73,6 +73,8 @@
 
 #include "phy-qcom-qmp-pcs-v10.h"
 
+#include "phy-qcom-qmp-pcs-v10_60.h"
+
 /* QPHY_SW_RESET bit */
 #define SW_RESET				BIT(0)
 /* QPHY_POWER_DOWN_CONTROL */

-- 
2.34.1