From: Matthew Leung <matthew.leung@oss.qualcomm.com>
To: Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Matthew Leung <matthew.leung@oss.qualcomm.com>
Subject: [PATCH 09/10] phy: qcom-qmp: pcs-pcie: Add v10.60 register offsets
Date: Fri, 08 May 2026 23:31:24 +0000 [thread overview]
Message-ID: <20260508-hawi-phy-pcie-v1-9-237b894353fc@oss.qualcomm.com> (raw)
In-Reply-To: <20260508-hawi-phy-pcie-v1-0-237b894353fc@oss.qualcomm.com>
Hawi SoC uses QMP phy with version v10.60 for PCIe Gen4 x1. Add the new
PCS PCIe specific offsets in a dedicated header file.
Signed-off-by: Matthew Leung <matthew.leung@oss.qualcomm.com>
---
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 1 +
.../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h | 26 ++++++++++++++++++++++
2 files changed, 27 insertions(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index ba17e53d000f..fb66e2a97ce0 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -41,6 +41,7 @@
#include "phy-qcom-qmp-pcs-pcie-v8.h"
#include "phy-qcom-qmp-qserdes-txrx-pcie-v8.h"
#include "phy-qcom-qmp-pcs-pcie-v10.h"
+#include "phy-qcom-qmp-pcs-pcie-v10_60.h"
#define PHY_INIT_COMPLETE_TIMEOUT 10000
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h
new file mode 100644
index 000000000000..e4a2bdc7c3f0
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v10_60.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V10_60_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V10_60_H_
+
+/* Only for QMP V10_60 PHY - PCIE PCS registers */
+#define QPHY_PCIE_V10_60_PCS_POWER_STATE_CONFIG2 0x00c
+#define QPHY_PCIE_V10_60_PCS_PCS_TX_RX_CONFIG 0x018
+#define QPHY_PCIE_V10_60_PCS_ENDPOINT_REFCLK_DRIVE 0x01c
+#define QPHY_PCIE_V10_60_PCS_OSC_DTCT_ACTIONS 0x090
+#define QPHY_PCIE_V10_60_PCS_EQ_CONFIG1 0x0a0
+#define QPHY_PCIE_V10_60_PCS_G3_RXEQEVAL_TIME 0x0f0
+#define QPHY_PCIE_V10_60_PCS_G4_RXEQEVAL_TIME 0x0f4
+#define QPHY_PCIE_V10_60_PCS_G4_EQ_CONFIG5 0x108
+#define QPHY_PCIE_V10_60_PCS_G4_PRE_GAIN 0x15c
+#define QPHY_PCIE_V10_60_PCS_RX_MARGINING_CONFIG1 0x17c
+#define QPHY_PCIE_V10_60_PCS_RX_MARGINING_CONFIG3 0x184
+#define QPHY_PCIE_V10_60_PCS_RX_MARGINING_CONFIG5 0x18c
+#define QPHY_PCIE_V10_60_PCS_G3_FOM_EQ_CONFIG5 0x1ac
+#define QPHY_PCIE_V10_60_PCS_G4_FOM_EQ_CONFIG5 0x1c0
+#define QPHY_PCIE_V10_60_PCS_POWER_STATE_CONFIG6 0x1d0
+
+#endif
--
2.34.1
next prev parent reply other threads:[~2026-05-08 23:31 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-08 23:31 [PATCH 00/10] phy: qcom: qmp-pcie: Add PCIe PHY support for Hawi Matthew Leung
2026-05-08 23:31 ` [PATCH 01/10] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Add Hawi compatibles Matthew Leung
2026-05-08 23:31 ` [PATCH 02/10] phy: qcom-qmp: qserdes-com: Add v10 register offsets Matthew Leung
2026-05-08 23:31 ` [PATCH 03/10] phy: qcom-qmp: qserdes-txrx: " Matthew Leung
2026-05-08 23:31 ` [PATCH 04/10] phy: qcom-qmp: pcs: " Matthew Leung
2026-05-08 23:31 ` [PATCH 05/10] phy: qcom-qmp: pcs-pcie: " Matthew Leung
2026-05-08 23:31 ` [PATCH 06/10] phy: qcom-qmp: qserdes-com: Add v10.60 " Matthew Leung
2026-05-08 23:31 ` [PATCH 07/10] phy: qcom-qmp: qserdes-txrx: " Matthew Leung
2026-05-08 23:31 ` [PATCH 08/10] phy: qcom-qmp: pcs: " Matthew Leung
2026-05-08 23:31 ` Matthew Leung [this message]
2026-05-08 23:38 ` [PATCH 09/10] phy: qcom-qmp: pcs-pcie: " sashiko-bot
2026-05-08 23:31 ` [PATCH 10/10] phy: qcom: qmp-pcie: Add QMP PCIe PHY support for Hawi Matthew Leung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260508-hawi-phy-pcie-v1-9-237b894353fc@oss.qualcomm.com \
--to=matthew.leung@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox