[PATCH v2 0/2] drm/panel: Add panel driver for Chipone ICNA35XX based panels

[PATCH v2 0/2] drm/panel: Add panel driver for Chipone ICNA35XX based panels

[Aaron Kling via B4 Relay]

This driver is based on the one by Teguh Sobirin [0].
    
Due to [1], the AYN vendor description patch has been folded into the
AYN QCS8550 dt series. Which means this series depends on said series
and it must be picked up before this.

[0] https://github.com/AYNTechnologies/linux/commit/4c5e76e974db7cca853619ca138eecd8f004622f
[1] https://lore.kernel.org/linux-arm-msm/c7fb3f89-6574-4761-9ef2-2fdf6d4801b5@kernel.org

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
Changes in v2:
- Fix lint warning in patch 1
- Add ayaneo,pocketds-panel-top compatible to patches 1 and 2, it uses the
  same init sequence as the odin 2 portal panel.
- Link to v1: https://lore.kernel.org/r/20260509-icna35xx-v1-0-688d3d4e10f9@gmail.com

---
Aaron Kling (1):
      dt-bindings: display: panel: Add Chipone ICNA 35xx OLED driver bindings

Teguh Sobirin (1):
      drm/panel: Add panel driver for Chipone ICNA35XX based panels

 .../bindings/display/panel/chipone,icna35xx.yaml   |  79 +++
 drivers/gpu/drm/panel/Kconfig                      |  11 +
 drivers/gpu/drm/panel/Makefile                     |   1 +
 drivers/gpu/drm/panel/panel-chipone-icna35xx.c     | 619 +++++++++++++++++++++
 4 files changed, 710 insertions(+)
---
base-commit: e98d21c170b01ddef366f023bbfcf6b31509fa83
change-id: 20260220-icna35xx-ec9afa13e1aa
prerequisite-change-id: 20260217-ayn-qcs8550-16c07b63de26:v8
prerequisite-patch-id: 2b010637c46f5ea0e19a2fa87cc5ccb19bfd9204
prerequisite-patch-id: d0c633dc17f0aba726a8e8d21fee52b944bf67ff
prerequisite-patch-id: 11f4208bd788df984cec7404088c7d071ec49dfc
prerequisite-patch-id: 76b61799dba520fc7fa3ff39b044e24103337af3
prerequisite-patch-id: 3844bef2eda3cf59031b1d131eb6ba9295629bb4
prerequisite-patch-id: 3331648bc6f4ac3bb156f0525aa1ede92bfc57f1

Best regards,
-- 
Aaron Kling <webgeek1234@gmail.com>

[PATCH v2 1/2] dt-bindings: display: panel: Add Chipone ICNA 35xx OLED driver bindings

[Aaron Kling via B4 Relay]

From: Aaron Kling <webgeek1234@gmail.com>

The Chipone ICNA35xx series of DDICs are high refresh, low power
MIPI-DSI drivers for OLED panels. The icna3512 is used by the Ayn Odin 2
Portal and the icna3520 is used by the Ayn Thor top panel and the Ayn
Odin 3.

Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 .../bindings/display/panel/chipone,icna35xx.yaml   | 79 ++++++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
new file mode 100644
index 00000000000000..6464d8d0cf86d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/chipone,icna35xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICNA35xx display drivers
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+
+description:
+  The Chipone ICNA35xx are a series of DDICs connected
+  using a MIPI-DSI video interface.
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - ayaneo,pocketds-panel-top
+              - ayntec,odin2portal-panel
+          - const: chipone,icna3512
+
+      - items:
+          - enum:
+              - ayntec,odin3-panel
+              - ayntec,thor-panel-top
+          - const: chipone,icna3520
+
+  reg:
+    maxItems: 1
+    description: DSI virtual channel
+
+  vdd-supply: true
+  vddio-supply: true
+  vci-supply: true
+  disp-supply: true
+  blvdd-supply: true
+
+  port: true
+  reset-gpios: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - vdd-supply
+  - vddio-supply
+  - vci-supply
+  - disp-supply
+  - blvdd-supply
+  - reset-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "ayntec,odin2portal-panel", "chipone,icna3512";
+            reg = <0>;
+            vdd-supply = <&vreg_l11b_1p2>;
+            vddio-supply = <&vreg_l12b_1p8>;
+            vci-supply = <&vreg_l13b_3p0>;
+            disp-supply = <&vdd_disp_2v8>;
+            blvdd-supply = <&vdd_bl_5v0>;
+            reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+...

-- 
2.53.0

[PATCH v2 2/2] drm/panel: Add panel driver for Chipone ICNA35XX based panels

[Aaron Kling via B4 Relay]

From: Teguh Sobirin <teguh@sobir.in>

This adds support for the ICNA3512 and ICNA3520 DDICs used in the AYN
Odin 2 Portal and for both the AYN Odin 3 and the AYN Thor top panel
respectively.

Signed-off-by: Teguh Sobirin <teguh@sobir.in>
Co-developed-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
---
 drivers/gpu/drm/panel/Kconfig                  |  11 +
 drivers/gpu/drm/panel/Makefile                 |   1 +
 drivers/gpu/drm/panel/panel-chipone-icna35xx.c | 619 +++++++++++++++++++++++++
 3 files changed, 631 insertions(+)

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 7450b27622a233..1368b5a0b6c912 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -105,6 +105,17 @@ config DRM_PANEL_BOE_TV101WUM_LL2
 	  Say Y here if you want to support for BOE TV101WUM-LL2
 	  WUXGA PANEL DSI Video Mode panel
 
+config DRM_PANEL_CHIPONE_ICNA35XX
+	tristate "Chipone ICNA35XX panel driver"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select DRM_DISPLAY_HELPER
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the Chipone ICNA3512 and ICNA3520 display controllers,
+	  such as some Tianma panels used in AYN Odin2 Portal and Thor.
+
 config DRM_PANEL_CHIPWEALTH_CH13726A
 	tristate "CHIPWEALTH CH13726A-based DSI panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index c2c5cf81711633..d39a8f82fa8c06 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_DRM_PANEL_BOE_TD4320) += panel-boe-td4320.o
 obj-$(CONFIG_DRM_PANEL_BOE_TH101MB31UIG002_28A) += panel-boe-th101mb31ig002-28a.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_LL2) += panel-boe-tv101wum-ll2.o
 obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
+obj-$(CONFIG_DRM_PANEL_CHIPONE_ICNA35XX) += panel-chipone-icna35xx.o
 obj-$(CONFIG_DRM_PANEL_CHIPWEALTH_CH13726A) += panel-chipwealth-ch13726a.o
 obj-$(CONFIG_DRM_PANEL_DSI_CM) += panel-dsi-cm.o
 obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
diff --git a/drivers/gpu/drm/panel/panel-chipone-icna35xx.c b/drivers/gpu/drm/panel/panel-chipone-icna35xx.c
new file mode 100644
index 00000000000000..958f205a7f4f93
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-chipone-icna35xx.c
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Chipone ICNA35XX Driver IC panels driver
+ *
+ * Copyright (c) 2025 Teguh Sobirin <teguh@sobir.in>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/display/drm_dsc.h>
+#include <drm/display/drm_dsc_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct panel_info {
+	struct drm_panel panel;
+	struct drm_connector *connector;
+	struct mipi_dsi_device *dsi;
+	struct panel_desc *desc;
+	enum drm_panel_orientation orientation;
+
+	struct gpio_desc *reset_gpio;
+	struct regulator_bulk_data *supplies;
+};
+
+struct panel_desc {
+	unsigned int width_mm;
+	unsigned int height_mm;
+
+	unsigned int bpc;
+	unsigned int lanes;
+	unsigned long mode_flags;
+	enum mipi_dsi_pixel_format format;
+
+	const struct drm_display_mode *modes;
+	unsigned int num_modes;
+	int (*init_sequence)(struct panel_info *pinfo);
+
+	struct drm_dsc_config dsc;
+};
+
+static const struct regulator_bulk_data panel_supplies[] = {
+	{ .supply = "vdd" },
+	{ .supply = "vddio" },
+	{ .supply = "vci" },
+	{ .supply = "disp" },
+	{ .supply = "blvdd" },
+};
+
+static inline struct panel_info *to_panel_info(struct drm_panel *panel)
+{
+	return container_of(panel, struct panel_info, panel);
+}
+
+static int icna35xx_get_current_mode(struct panel_info *pinfo)
+{
+	struct drm_connector *connector = pinfo->connector;
+	struct drm_crtc_state *crtc_state;
+	int i;
+
+	/* Return the default (first) mode if no info available yet */
+	if (!connector->state || !connector->state->crtc)
+		return 0;
+
+	crtc_state = connector->state->crtc->state;
+
+	for (i = 0; i < pinfo->desc->num_modes; i++) {
+		if (drm_mode_match(&crtc_state->mode,
+				   &pinfo->desc->modes[i],
+				   DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_CLOCK))
+			return i;
+	}
+
+	return 0;
+}
+
+static int icna3512_init_sequence(struct panel_info *pinfo)
+{
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = pinfo->dsi };
+	struct drm_dsc_picture_parameter_set pps;
+
+	int cur_mode = icna35xx_get_current_mode(pinfo);
+	int cur_vrefresh = drm_mode_vrefresh(&pinfo->desc->modes[cur_mode]);
+
+	pinfo->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9C, 0xA5, 0xA5);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xFD, 0x5A, 0x5A);
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x53, 0xE0);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x35, 0x00);
+
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+
+	mipi_dsi_msleep(&dsi_ctx, 120);
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x0F);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xCE, 0x22);
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x01);
+	if (cur_vrefresh == 165) {
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x48, 0x20);
+	} else if (cur_vrefresh == 144) {
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB3,
+			0x00, 0xE0, 0xA0, 0x10, 0xC8, 0x00, 0x02, 0x83,
+			0x00, 0x10, 0x14, 0x00, 0x00, 0xC3, 0x00, 0x10,
+			0x14, 0x00, 0x00, 0xE0, 0x00, 0x10, 0x14, 0x00,
+			0x00, 0xE0, 0xA0, 0x10, 0xC8, 0x22, 0x18, 0x18,
+			0x18, 0x18, 0x18);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x07);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB5,
+			0x04, 0x0A, 0x08, 0x0A, 0x04, 0x00, 0xC4);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xD9,
+			0x66, 0xE4, 0xE4, 0x66, 0xE4, 0xE4, 0x00, 0xC4,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xCE,
+			0x01, 0x01, 0x01, 0x01, 0x04, 0x07, 0xA4);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x48, 0x30);
+	} else if (cur_vrefresh == 120) {
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB3,
+			0x00, 0xE0, 0xA0, 0x10, 0xC8, 0x00, 0x02, 0x83,
+			0x00, 0x10, 0x14, 0x00, 0x00, 0xC3, 0x00, 0x10,
+			0x14, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x9C, 0x00,
+			0x00, 0xE0, 0xA0, 0x10, 0xC8, 0x22, 0x18, 0x18,
+			0x18, 0x18, 0x18);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x07);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB5,
+			0x04, 0x0C, 0x08, 0x0C, 0x04, 0x00, 0xC4);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xD9,
+			0x88, 0x40, 0x40, 0x88, 0x40, 0x40, 0x00, 0xEB,
+			0x11, 0xFF);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xCE,
+			0x01, 0x01, 0x01, 0x01, 0x04, 0x09, 0x2C);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x48, 0x30);
+	} else if (cur_vrefresh == 90) {
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB3,
+			0x00, 0xE0, 0x40, 0x10, 0xA8, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x07);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB2,
+			0x04, 0x10, 0x08, 0x0C, 0x04, 0x00, 0xC4);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xD3,
+			0x55, 0x80, 0x80, 0x55, 0x80, 0xB0, 0x00, 0x9C,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xCB,
+			0x01, 0x01, 0x01, 0x01, 0x04, 0x06, 0x1C);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x48, 0x00);
+	} else {
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB3,
+			0x00, 0xE0, 0xA0, 0x10, 0xC8, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x07);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB2,
+			0x04, 0x18, 0x08, 0x0C, 0x02, 0x00, 0xC4);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xD3,
+			0x88, 0x4A, 0x4A, 0x88, 0x4A, 0x4A, 0x00, 0xEB,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xCB,
+			0x01, 0x01, 0x01, 0x01, 0x04, 0x2C);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x48, 0x00);
+	}
+
+	drm_dsc_pps_payload_pack(&pps, &pinfo->desc->dsc);
+	mipi_dsi_picture_parameter_set_multi(&dsi_ctx, &pps);
+
+	mipi_dsi_msleep(&dsi_ctx, 20);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static int icna3520_init_sequence(struct panel_info *pinfo)
+{
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = pinfo->dsi };
+	struct drm_dsc_picture_parameter_set pps;
+
+	int cur_mode = icna35xx_get_current_mode(pinfo);
+	int cur_vrefresh = drm_mode_vrefresh(&pinfo->desc->modes[cur_mode]);
+
+	pinfo->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9C, 0xA5, 0xA5);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xFD, 0x5A, 0x5A);
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x53, 0xE0);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x35, 0x00);
+
+	mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx);
+
+	mipi_dsi_msleep(&dsi_ctx, 120);
+
+	if (cur_vrefresh == 120) {
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x48, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB3,
+			0x00, 0xD8, 0x00, 0x1C, 0x00, 0x4C);
+	} else {
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x48, 0x10);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x00);
+		mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB3,
+			0x00, 0xDB, 0x00, 0x1C, 0x00, 0x1C, 0x00, 0x00,
+			0xDB, 0x00, 0x1C, 0x07, 0xD6, 0x00);
+	}
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x01);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB2, 0x00);
+
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0x9F, 0x0D);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB2, 0x27);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB6, 0x03);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xBB, 0x01);
+	mipi_dsi_generic_write_seq_multi(&dsi_ctx, 0xB2, 0x24);
+
+	drm_dsc_pps_payload_pack(&pps, &pinfo->desc->dsc);
+	mipi_dsi_picture_parameter_set_multi(&dsi_ctx, &pps);
+
+	mipi_dsi_msleep(&dsi_ctx, 20);
+
+	mipi_dsi_dcs_set_display_on_multi(&dsi_ctx);
+
+	return dsi_ctx.accum_err;
+}
+
+static const struct drm_display_mode odin2portal_modes[] = {
+	{
+		/* 165Hz */
+		.clock = (1080 + 98 + 1 + 23) * (1920 + 20 + 1 + 15) * 165 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 98,
+		.hsync_end = 1080 + 98 + 1,
+		.htotal = 1080 + 98 + 1 + 23,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 20,
+		.vsync_end = 1920 + 20 + 1,
+		.vtotal = 1920 + 20 + 1 + 15,
+	},
+	{
+		/* 144Hz */
+		.clock = (1080 + 156 + 1 + 23) * (1920 + 20 + 1 + 15) * 144 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 156,
+		.hsync_end = 1080 + 156 + 1,
+		.htotal = 1080 + 156 + 1 + 23,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 20,
+		.vsync_end = 1920 + 20 + 1,
+		.vtotal = 1920 + 20 + 1 + 15,
+	},
+	{
+		/* 120Hz */
+		.clock = (1080 + 156 + 1 + 23) * (1920 + 412 + 1 + 15) * 120 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 156,
+		.hsync_end = 1080 + 156 + 1,
+		.htotal = 1080 + 156 + 1 + 23,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 412,
+		.vsync_end = 1920 + 412 + 1,
+		.vtotal = 1920 + 412 + 1 + 15,
+	},
+	{
+		/* 90Hz */
+		.clock = (1080 + 156 + 1 + 23) * (1920 + 1192 + 1 + 15) * 90 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 156,
+		.hsync_end = 1080 + 156 + 1,
+		.htotal = 1080 + 156 + 1 + 23,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 1192,
+		.vsync_end = 1920 + 1192 + 1,
+		.vtotal = 1920 + 1192 + 1 + 15,
+	},
+	{
+		/* 60Hz */
+		.clock = (1080 + 156 + 1 + 23) * (1920 + 2760 + 1 + 15) * 60 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 156,
+		.hsync_end = 1080 + 156 + 1,
+		.htotal = 1080 + 156 + 1 + 23,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 2760,
+		.vsync_end = 1920 + 2760 + 1,
+		.vtotal = 1920 + 2760 + 1 + 15,
+	}
+};
+
+static const struct drm_display_mode thor_top_modes[] = {
+	{
+		/* 120Hz */
+		.clock = (1080 + 24 + 1 + 24) * (1920 + 28 + 1 + 28) * 120 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 24,
+		.hsync_end = 1080 + 24 + 1,
+		.htotal = 1080 + 24 + 1 + 24,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 28,
+		.vsync_end = 1920 + 28 + 1,
+		.vtotal = 1920 + 28 + 1 + 28,
+	},
+	{
+		/* 60Hz */
+		.clock = (1080 + 24 + 1 + 24) * (1920 + 2006 + 1 + 28) * 60 / 1000,
+		.hdisplay = 1080,
+		.hsync_start = 1080 + 24,
+		.hsync_end = 1080 + 24 + 1,
+		.htotal = 1080 + 24 + 1 + 24,
+		.vdisplay = 1920,
+		.vsync_start = 1920 + 2006,
+		.vsync_end = 1920 + 2006 + 1,
+		.vtotal = 1920 + 2006 + 1 + 28,
+	}
+};
+
+static struct panel_desc odin2portal_desc = {
+	.modes = odin2portal_modes,
+	.num_modes = ARRAY_SIZE(odin2portal_modes),
+	.width_mm = 160,
+	.height_mm = 89,
+	.bpc = 8,
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags = MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_CLOCK_NON_CONTINUOUS |
+			MIPI_DSI_MODE_LPM,
+	.init_sequence = icna3512_init_sequence,
+	.dsc = {
+		.dsc_version_major = 0x1,
+		.dsc_version_minor = 0x1,
+		.slice_height = 20,
+		.slice_width = 540,
+		.slice_count = 2,
+		.bits_per_component = 8,
+		.bits_per_pixel = 8 << 4,
+		.block_pred_enable = true,
+	},
+};
+
+static struct panel_desc thor_top_desc = {
+	.modes = thor_top_modes,
+	.num_modes = ARRAY_SIZE(thor_top_modes),
+	.width_mm = 136,
+	.height_mm = 68,
+	.bpc = 8,
+	.lanes = 4,
+	.format = MIPI_DSI_FMT_RGB888,
+	.mode_flags =  MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_CLOCK_NON_CONTINUOUS |
+			MIPI_DSI_MODE_LPM,
+	.init_sequence = icna3520_init_sequence,
+	.dsc = {
+		.dsc_version_major = 0x1,
+		.dsc_version_minor = 0x1,
+		.slice_height = 12,
+		.slice_width = 540,
+		.slice_count = 2,
+		.bits_per_component = 8,
+		.bits_per_pixel = 8 << 4,
+		.block_pred_enable = true,
+	},
+};
+
+static void icna35xx_reset(struct panel_info *pinfo)
+{
+	gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+	usleep_range(20000, 21000);
+	gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+	usleep_range(20000, 21000);
+	gpiod_set_value_cansleep(pinfo->reset_gpio, 0);
+	usleep_range(20000, 21000);
+}
+
+static int icna35xx_prepare(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(panel_supplies), pinfo->supplies);
+	if (ret < 0) {
+		dev_err(panel->dev, "failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	icna35xx_reset(pinfo);
+
+	ret = pinfo->desc->init_sequence(pinfo);
+	if (ret < 0) {
+		regulator_bulk_disable(ARRAY_SIZE(panel_supplies), pinfo->supplies);
+		dev_err(panel->dev, "failed to initialize panel: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int icna35xx_disable(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+	struct mipi_dsi_multi_context dsi_ctx = { .dsi = pinfo->dsi };
+
+	pinfo->dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	mipi_dsi_dcs_set_display_off_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 50);
+	mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx);
+	mipi_dsi_msleep(&dsi_ctx, 120);
+
+	return dsi_ctx.accum_err;
+}
+
+static int icna35xx_unprepare(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+
+	gpiod_set_value_cansleep(pinfo->reset_gpio, 1);
+	regulator_bulk_disable(ARRAY_SIZE(panel_supplies), pinfo->supplies);
+
+	return 0;
+}
+
+static void icna35xx_remove(struct mipi_dsi_device *dsi)
+{
+	struct panel_info *pinfo = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(pinfo->dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&pinfo->panel);
+}
+
+static int icna35xx_get_modes(struct drm_panel *panel,
+			       struct drm_connector *connector)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+	int i;
+
+	for (i = 0; i < pinfo->desc->num_modes; i++) {
+		const struct drm_display_mode *m = &pinfo->desc->modes[i];
+		struct drm_display_mode *mode;
+
+		mode = drm_mode_duplicate(connector->dev, m);
+		if (!mode) {
+			dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+				m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+			return -ENOMEM;
+		}
+
+		mode->type = DRM_MODE_TYPE_DRIVER;
+		if (i == 0)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_set_name(mode);
+		drm_mode_probed_add(connector, mode);
+	}
+
+	connector->display_info.width_mm = pinfo->desc->width_mm;
+	connector->display_info.height_mm = pinfo->desc->height_mm;
+	connector->display_info.bpc = pinfo->desc->bpc;
+	pinfo->connector = connector;
+
+	return pinfo->desc->num_modes;
+}
+
+static enum drm_panel_orientation icna35xx_get_orientation(struct drm_panel *panel)
+{
+	struct panel_info *pinfo = to_panel_info(panel);
+
+	return pinfo->orientation;
+}
+
+static const struct drm_panel_funcs icna35xx_panel_funcs = {
+	.disable = icna35xx_disable,
+	.prepare = icna35xx_prepare,
+	.unprepare = icna35xx_unprepare,
+	.get_modes = icna35xx_get_modes,
+	.get_orientation = icna35xx_get_orientation,
+};
+
+static int icna35xx_bl_update_status(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness = backlight_get_brightness(bl);
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return 0;
+}
+
+static int icna35xx_bl_get_brightness(struct backlight_device *bl)
+{
+	struct mipi_dsi_device *dsi = bl_get_data(bl);
+	u16 brightness;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
+	if (ret < 0)
+		return ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	return brightness;
+}
+
+static const struct backlight_ops icna35xx_bl_ops = {
+	.update_status = icna35xx_bl_update_status,
+	.get_brightness = icna35xx_bl_get_brightness,
+};
+
+static struct backlight_device *icna35xx_create_backlight(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	const struct backlight_properties props = {
+		.type = BACKLIGHT_RAW,
+		.brightness = 4096,
+		.max_brightness = 4096,
+	};
+
+	return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
+					      &icna35xx_bl_ops, &props);
+}
+
+static int icna35xx_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct panel_info *pinfo;
+	int ret;
+
+	pinfo = devm_drm_panel_alloc(dev, __typeof(*pinfo), panel,
+				     &icna35xx_panel_funcs,
+				     DRM_MODE_CONNECTOR_DSI);
+	if (IS_ERR(pinfo))
+		return PTR_ERR(pinfo);
+
+	ret = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(panel_supplies),
+	panel_supplies, &pinfo->supplies);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	pinfo->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(pinfo->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(pinfo->reset_gpio), "failed to get reset gpio\n");
+
+	pinfo->desc = (struct panel_desc *)of_device_get_match_data(dev);
+	if (!pinfo->desc)
+		return -ENODEV;
+
+	pinfo->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, pinfo);
+
+	ret = of_drm_get_panel_orientation(dev->of_node, &pinfo->orientation);
+	if (ret < 0) {
+		dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret);
+		return ret;
+	}
+
+	pinfo->panel.prepare_prev_first = true;
+
+	pinfo->panel.backlight = icna35xx_create_backlight(dsi);
+	if (IS_ERR(pinfo->panel.backlight))
+		return dev_err_probe(dev, PTR_ERR(pinfo->panel.backlight),
+				     "Failed to create backlight\n");
+
+	drm_panel_add(&pinfo->panel);
+
+	pinfo->dsi->lanes = pinfo->desc->lanes;
+	pinfo->dsi->format = pinfo->desc->format;
+	pinfo->dsi->mode_flags = pinfo->desc->mode_flags;
+	pinfo->dsi->dsc = &pinfo->desc->dsc;
+
+	ret = mipi_dsi_attach(pinfo->dsi);
+	if (ret < 0) {
+		dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+		drm_panel_remove(&pinfo->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id icna35xx_of_match[] = {
+	{ .compatible = "ayaneo,pocketds-panel-top", .data = &odin2portal_desc },
+	{ .compatible = "ayntec,odin2portal-panel", .data = &odin2portal_desc },
+	{ .compatible = "ayntec,odin3-panel", .data = &thor_top_desc },
+	{ .compatible = "ayntec,thor-panel-top", .data = &thor_top_desc },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, icna35xx_of_match);
+
+static struct mipi_dsi_driver icna35xx_driver = {
+	.probe = icna35xx_probe,
+	.remove = icna35xx_remove,
+	.driver = {
+		.name = "panel-chipone-icna35xx",
+		.of_match_table = icna35xx_of_match,
+	},
+};
+module_mipi_dsi_driver(icna35xx_driver);
+
+MODULE_AUTHOR("Teguh Sobirin <teguh@sobir.in>");
+MODULE_DESCRIPTION("DRM driver for Chipone ICNA35XX based MIPI DSI panels");
+MODULE_LICENSE("GPL");

-- 
2.53.0

Re: [PATCH v2 2/2] drm/panel: Add panel driver for Chipone ICNA35XX based panels

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 566 bytes --]

On Thu, May 14, 2026 at 12:24:50PM -0500, Aaron Kling via B4 Relay wrote:

> +static const struct of_device_id icna35xx_of_match[] = {
> +	{ .compatible = "ayaneo,pocketds-panel-top", .data = &odin2portal_desc },
> +	{ .compatible = "ayntec,odin2portal-panel", .data = &odin2portal_desc },
> +	{ .compatible = "ayntec,odin3-panel", .data = &thor_top_desc },
> +	{ .compatible = "ayntec,thor-panel-top", .data = &thor_top_desc },

This looks like you could be using the fallback compatibles instead of
matching on the panel's. Why aren't you?

> +	{ /* sentinel */ }

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 1/2] dt-bindings: display: panel: Add Chipone ICNA 35xx OLED driver bindings

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1988 bytes --]

On Thu, May 14, 2026 at 12:24:49PM -0500, Aaron Kling via B4 Relay wrote:
> From: Aaron Kling <webgeek1234@gmail.com>
> 
> The Chipone ICNA35xx series of DDICs are high refresh, low power
> MIPI-DSI drivers for OLED panels. The icna3512 is used by the Ayn Odin 2
> Portal and the icna3520 is used by the Ayn Thor top panel and the Ayn
> Odin 3.
> 
> Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> ---
>  .../bindings/display/panel/chipone,icna35xx.yaml   | 79 ++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
> new file mode 100644
> index 00000000000000..6464d8d0cf86d5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml

Filename matching a compatible please.

> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/chipone,icna35xx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Chipone ICNA35xx display drivers
> +
> +maintainers:
> +  - Neil Armstrong <neil.armstrong@linaro.org>
> +
> +description:
> +  The Chipone ICNA35xx are a series of DDICs connected
> +  using a MIPI-DSI video interface.
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - enum:
> +              - ayaneo,pocketds-panel-top
> +              - ayntec,odin2portal-panel
> +          - const: chipone,icna3512
> +
> +      - items:
> +          - enum:
> +              - ayntec,odin3-panel
> +              - ayntec,thor-panel-top
> +          - const: chipone,icna3520

Commit message should state why these ddics are not compatible with one
another.

Rest of this seems okay.

pw-bot: changes-requested

Thanks,
Conor.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 1/2] dt-bindings: display: panel: Add Chipone ICNA 35xx OLED driver bindings

[Aaron Kling]

On Thu, May 14, 2026 at 1:07 PM Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, May 14, 2026 at 12:24:49PM -0500, Aaron Kling via B4 Relay wrote:
> > From: Aaron Kling <webgeek1234@gmail.com>
> >
> > The Chipone ICNA35xx series of DDICs are high refresh, low power
> > MIPI-DSI drivers for OLED panels. The icna3512 is used by the Ayn Odin 2
> > Portal and the icna3520 is used by the Ayn Thor top panel and the Ayn
> > Odin 3.
> >
> > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > ---
> >  .../bindings/display/panel/chipone,icna35xx.yaml   | 79 ++++++++++++++++++++++
> >  1 file changed, 79 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
> > new file mode 100644
> > index 00000000000000..6464d8d0cf86d5
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
>
> Filename matching a compatible please.

Does this require splitting / duplicating the files for each ddic, or
can one be arbitrarily picked and the other stay with it?

> > @@ -0,0 +1,79 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/panel/chipone,icna35xx.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Chipone ICNA35xx display drivers
> > +
> > +maintainers:
> > +  - Neil Armstrong <neil.armstrong@linaro.org>
> > +
> > +description:
> > +  The Chipone ICNA35xx are a series of DDICs connected
> > +  using a MIPI-DSI video interface.
> > +
> > +allOf:
> > +  - $ref: panel-common.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - ayaneo,pocketds-panel-top
> > +              - ayntec,odin2portal-panel
> > +          - const: chipone,icna3512
> > +
> > +      - items:
> > +          - enum:
> > +              - ayntec,odin3-panel
> > +              - ayntec,thor-panel-top
> > +          - const: chipone,icna3520
>
> Commit message should state why these ddics are not compatible with one
> another.

Ack. Short version: some of the mipi vendor commands don't match.

> Rest of this seems okay.
>
> pw-bot: changes-requested
>
> Thanks,
> Conor.

Aaron

Re: [PATCH v2 1/2] dt-bindings: display: panel: Add Chipone ICNA 35xx OLED driver bindings

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 2650 bytes --]

On Thu, May 14, 2026 at 01:20:57PM -0500, Aaron Kling wrote:
> On Thu, May 14, 2026 at 1:07 PM Conor Dooley <conor@kernel.org> wrote:
> >
> > On Thu, May 14, 2026 at 12:24:49PM -0500, Aaron Kling via B4 Relay wrote:
> > > From: Aaron Kling <webgeek1234@gmail.com>
> > >
> > > The Chipone ICNA35xx series of DDICs are high refresh, low power
> > > MIPI-DSI drivers for OLED panels. The icna3512 is used by the Ayn Odin 2
> > > Portal and the icna3520 is used by the Ayn Thor top panel and the Ayn
> > > Odin 3.
> > >
> > > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > > ---
> > >  .../bindings/display/panel/chipone,icna35xx.yaml   | 79 ++++++++++++++++++++++
> > >  1 file changed, 79 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
> > > new file mode 100644
> > > index 00000000000000..6464d8d0cf86d5
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
> >
> > Filename matching a compatible please.
> 
> Does this require splitting / duplicating the files for each ddic, or
> can one be arbitrarily picked and the other stay with it?

Pick an arbitrary one. Maybe which one is older?

> > > @@ -0,0 +1,79 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/panel/chipone,icna35xx.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Chipone ICNA35xx display drivers
> > > +
> > > +maintainers:
> > > +  - Neil Armstrong <neil.armstrong@linaro.org>
> > > +
> > > +description:
> > > +  The Chipone ICNA35xx are a series of DDICs connected
> > > +  using a MIPI-DSI video interface.
> > > +
> > > +allOf:
> > > +  - $ref: panel-common.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    oneOf:
> > > +      - items:
> > > +          - enum:
> > > +              - ayaneo,pocketds-panel-top
> > > +              - ayntec,odin2portal-panel
> > > +          - const: chipone,icna3512
> > > +
> > > +      - items:
> > > +          - enum:
> > > +              - ayntec,odin3-panel
> > > +              - ayntec,thor-panel-top
> > > +          - const: chipone,icna3520
> >
> > Commit message should state why these ddics are not compatible with one
> > another.
> 
> Ack. Short version: some of the mipi vendor commands don't match.
> 
> > Rest of this seems okay.
> >
> > pw-bot: changes-requested
> >
> > Thanks,
> > Conor.
> 
> Aaron

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 2/2] drm/panel: Add panel driver for Chipone ICNA35XX based panels

[Aaron Kling]

On Thu, May 14, 2026 at 1:05 PM Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, May 14, 2026 at 12:24:50PM -0500, Aaron Kling via B4 Relay wrote:
>
> > +static const struct of_device_id icna35xx_of_match[] = {
> > +     { .compatible = "ayaneo,pocketds-panel-top", .data = &odin2portal_desc },
> > +     { .compatible = "ayntec,odin2portal-panel", .data = &odin2portal_desc },
> > +     { .compatible = "ayntec,odin3-panel", .data = &thor_top_desc },
> > +     { .compatible = "ayntec,thor-panel-top", .data = &thor_top_desc },
>
> This looks like you could be using the fallback compatibles instead of
> matching on the panel's. Why aren't you?

I'm uncertain if the panels are actually the same between these
devices or if the init sequences are just similar enough to share. I
am told that the thor top panel and the odin 3 panel are the same
model. But I don't know about the portal and the pocket ds, just know
that they both fire up and work as expected with the same init
sequence. I'm trying to follow the bindings idea that these might be
different physical panels that only share a ddic and thus driver
handling.

> > +     { /* sentinel */ }

Aaron

Re: [PATCH v2 1/2] dt-bindings: display: panel: Add Chipone ICNA 35xx OLED driver bindings

[Aaron Kling]

On Thu, May 14, 2026 at 1:23 PM Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, May 14, 2026 at 01:20:57PM -0500, Aaron Kling wrote:
> > On Thu, May 14, 2026 at 1:07 PM Conor Dooley <conor@kernel.org> wrote:
> > >
> > > On Thu, May 14, 2026 at 12:24:49PM -0500, Aaron Kling via B4 Relay wrote:
> > > > From: Aaron Kling <webgeek1234@gmail.com>
> > > >
> > > > The Chipone ICNA35xx series of DDICs are high refresh, low power
> > > > MIPI-DSI drivers for OLED panels. The icna3512 is used by the Ayn Odin 2
> > > > Portal and the icna3520 is used by the Ayn Thor top panel and the Ayn
> > > > Odin 3.
> > > >
> > > > Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
> > > > ---
> > > >  .../bindings/display/panel/chipone,icna35xx.yaml   | 79 ++++++++++++++++++++++
> > > >  1 file changed, 79 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
> > > > new file mode 100644
> > > > index 00000000000000..6464d8d0cf86d5
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/panel/chipone,icna35xx.yaml
> > >
> > > Filename matching a compatible please.
> >
> > Does this require splitting / duplicating the files for each ddic, or
> > can one be arbitrarily picked and the other stay with it?
>
> Pick an arbitrary one. Maybe which one is older?

Alright. I'm going to assume, perhaps unsafely, that the lower number is older.
>
> > > > @@ -0,0 +1,79 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/panel/chipone,icna35xx.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Chipone ICNA35xx display drivers
> > > > +
> > > > +maintainers:
> > > > +  - Neil Armstrong <neil.armstrong@linaro.org>
> > > > +
> > > > +description:
> > > > +  The Chipone ICNA35xx are a series of DDICs connected
> > > > +  using a MIPI-DSI video interface.
> > > > +
> > > > +allOf:
> > > > +  - $ref: panel-common.yaml#
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    oneOf:
> > > > +      - items:
> > > > +          - enum:
> > > > +              - ayaneo,pocketds-panel-top
> > > > +              - ayntec,odin2portal-panel
> > > > +          - const: chipone,icna3512
> > > > +
> > > > +      - items:
> > > > +          - enum:
> > > > +              - ayntec,odin3-panel
> > > > +              - ayntec,thor-panel-top
> > > > +          - const: chipone,icna3520
> > >
> > > Commit message should state why these ddics are not compatible with one
> > > another.
> >
> > Ack. Short version: some of the mipi vendor commands don't match.
> >
> > > Rest of this seems okay.
> > >
> > > pw-bot: changes-requested
> > >
> > > Thanks,
> > > Conor.
> >
> > Aaron

Re: [PATCH v2 2/2] drm/panel: Add panel driver for Chipone ICNA35XX based panels

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 1393 bytes --]

On Thu, May 14, 2026 at 01:24:19PM -0500, Aaron Kling wrote:
> On Thu, May 14, 2026 at 1:05 PM Conor Dooley <conor@kernel.org> wrote:
> >
> > On Thu, May 14, 2026 at 12:24:50PM -0500, Aaron Kling via B4 Relay wrote:
> >
> > > +static const struct of_device_id icna35xx_of_match[] = {
> > > +     { .compatible = "ayaneo,pocketds-panel-top", .data = &odin2portal_desc },
> > > +     { .compatible = "ayntec,odin2portal-panel", .data = &odin2portal_desc },
> > > +     { .compatible = "ayntec,odin3-panel", .data = &thor_top_desc },
> > > +     { .compatible = "ayntec,thor-panel-top", .data = &thor_top_desc },
> >
> > This looks like you could be using the fallback compatibles instead of
> > matching on the panel's. Why aren't you?
> 
> I'm uncertain if the panels are actually the same between these
> devices or if the init sequences are just similar enough to share. I
> am told that the thor top panel and the odin 3 panel are the same
> model. But I don't know about the portal and the pocket ds, just know
> that they both fire up and work as expected with the same init
> sequence. I'm trying to follow the bindings idea that these might be
> different physical panels that only share a ddic and thus driver
> handling.

That's a reasonable rationale. Could you include this in your commit
message please?

> 
> > > +     { /* sentinel */ }
> 
> Aaron

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]