Re: [PATCH v4 3/3] arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support

[sashiko-bot@kernel.org]

Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [Low] The compatible string `qcom,eliza-pmic-glink` is used without being documented in the binding schema.
--

commit 9f076cccb73f2dcb88a58f126b6e3528a73fc2ba
Author: Abel Vesa <abel.vesa@oss.qualcomm.com>

arm64: dts: qcom: eliza-mtp: Enable USB and ADSP support

This commit enables USB and ADSP support for the Eliza MTP. It describes
the USB port, the eUSB2 repeater provided by the PM7550BA PMIC, and the
ADSP remoteproc firmware.

> diff --git a/arch/arm64/boot/dts/qcom/eliza-mtp.dts b/arch/arm64/boot/dts/qcom/eliza-mtp.dts
> index 90f629800cb02..3e41c95edb28f 100644
> --- a/arch/arm64/boot/dts/qcom/eliza-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/eliza-mtp.dts
[ ... ]
> @@ -54,6 +57,44 @@ bi_tcxo_ao_div2: bi-tcxo-ao-div2-clk {
>  		};
>  	};
>  
> +	pmic-glink {
> +		compatible = "qcom,eliza-pmic-glink",
> +			     "qcom,sm8550-pmic-glink",
> +			     "qcom,pmic-glink";

Is the "qcom,eliza-pmic-glink" string documented in the binding schema?

Using a new compatible string here without adding it to the corresponding
binding document usually causes make dtbs_check to report schema
validation warnings.

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20260513-eliza-adsp-usb-v4-0-839936e89aca@oss.qualcomm.com?part=3