From: Yixun Lan <dlan@kernel.org>
To: sashiko-reviews@lists.linux.dev
Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org,
devicetree@vger.kernel.org, spacemit@lists.linux.dev
Subject: Re: [PATCH] riscv: dts: spacemit: drop unnecessary power supply from PCIe
Date: Fri, 15 May 2026 07:47:51 +0000 [thread overview]
Message-ID: <20260515074751-GKB3663945@kernel.org> (raw)
In-Reply-To: <20260514005435.484B5C2BCB8@smtp.kernel.org>
Hi
On 00:54 Thu 14 May , sashiko-bot@kernel.org wrote:
> Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
> - [High] Removing `vpcie3v3-supply` from the PCIe controller node breaks power sequencing because the `spacemit,k1-pcie` driver expects it on the controller node.
> --
>
> commit ab7558e23a3bb4900f7961804151870f4c1f99fe
> Author: Yixun Lan <dlan@kernel.org>
>
> riscv: dts: spacemit: drop unnecessary power supply from PCIe
>
> This commit removes the vpcie3v3-supply property from the PCIe controller
> nodes in the Banana Pi F3 and Milk-V Jupiter device trees. The commit message
> states that the supply belongs to the child port node rather than the Root
> Complex, aligning with the dt-binding documentation.
>
> Link: https://lore.kernel.org/all/20251113214540.2623070-4-elder@riscstar.com/
>
> > diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> > index e20daa50a152f..c70081856606f 100644
> > --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> > +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> > @@ -316,7 +316,6 @@ &pcie1_port {
> > };
> >
> > &pcie1 {
> > - vpcie3v3-supply = <&pcie_vcc_3v3>;
>
> Will removing the vpcie3v3-supply property from the controller node break
> power sequencing?
>
No, I don't think so, the PCIe RC do not require external power supply
> Looking at drivers/pci/controller/dwc/pcie-spacemit-k1.c, the host driver
> calls devm_regulator_get_enable(dev, "vpcie3v3") during k1_pcie_probe().
>
Right, I think the vpcie3v3 supply should be removed from host driver
> Without this property on the controller node, won't the driver fall back
> to a dummy regulator?
>
Currently, yes if above code not removed, it will fallback to dummy
regulator if no vpcie3v3-supply specified
> Since the spacemit-k1-pcie driver does not currently integrate with the PCI
> power control framework (by calling pci_pwrctrl_create_devices()), does any
> driver in the kernel actually control the power supply for the child port node?
>
Yes, the PCIe sub ports node will request the power supply, in
drivers/pci/pwrctrl/generic.c:119
slot_pwrctrl_probe() -> of_regulator_buck_get_all()
> While this issue might be masked on the Banana Pi F3 and Milk-V Jupiter
> boards because their vpcie3v3 regulators are defined as regulator-always-on,
> does this change break dynamic power management for the PCIe slots?
>
> Should the host driver be updated to adopt the pci_pwrctrl framework before
> dropping this property from the device tree?
>
The host driver already adopt pci_pwrctrl framework
> [ ... ]
>
> --
> Sashiko AI review · https://sashiko.dev/#/patchset/20260513-k1-pcie-fix-supply-v1-1-4eecbdd44ebe@kernel.org?part=1
--
Yixun Lan (dlan)
prev parent reply other threads:[~2026-05-15 7:47 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-13 2:14 [PATCH] riscv: dts: spacemit: drop unnecessary power supply from PCIe Yixun Lan
2026-05-13 8:24 ` Anand Moon
2026-05-14 0:54 ` sashiko-bot
2026-05-15 7:47 ` Yixun Lan [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260515074751-GKB3663945@kernel.org \
--to=dlan@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=spacemit@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox