[PATCH 15/18] arm64: dts: qcom: lemans: Fix PCIe wake GPIO polarity

[Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>]

The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
---
 arch/arm64/boot/dts/qcom/lemans-evk.dts          | 4 ++--
 arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
index c665db6a4595..fe9a2cd325d4 100644
--- a/arch/arm64/boot/dts/qcom/lemans-evk.dts
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -703,7 +703,7 @@ &mdss0_dp1_phy {
 
 &pcie0 {
 	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
 
 	pinctrl-0 = <&pcie0_default_state>;
 	pinctrl-names = "default";
@@ -720,7 +720,7 @@ &pcie0_phy {
 
 &pcie1 {
 	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 
 	pinctrl-0 = <&pcie1_default_state>;
 	pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 31bd00546d55..3a6d73b485a9 100644
--- a/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -854,7 +854,7 @@ wake-pins {
 
 &pcie0 {
 	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_default_state>;
@@ -864,7 +864,7 @@ &pcie0 {
 
 &pcie1 {
 	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie1_default_state>;

-- 
2.34.1