From: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Subject: [PATCH v3 0/7]ASoC: qcom: add AudioReach TDM backend support
Date: Wed, 8 Jul 2026 00:30:59 +0530 [thread overview]
Message-ID: <20260707190106.2876465-1-prasad.kumpatla@oss.qualcomm.com> (raw)
Add AudioReach support for LPASS Audio IF based TDM backends and wire it
up for the sc8280xp machine driver.
The series first adds topology-driven Audio IF source/sink handling so
the DSP interface parameters can be described by topology while runtime
media format and slot configuration still come from the machine driver.
It then adds TDM DAI operations for q6apm-lpass-dais, exposes the Audio
IF clock IDs through the q6dsp-lpass-ports binding and q6prm clock
tables, and introduces common QCOM helpers for parsing standard
dai-tdm-slot-* properties from backend CPU and codec endpoints.
Finally, sc8280xp uses the common helpers during hw_params to program
CPU and codec TDM slots, derive the backend bit clock from the active
PCM parameters, and request the CPU and codec clocks before the stream is
started.
Changes in v3:
- Reusing of tdm-slot.yaml and update the bindings.
Changes in v2:
- Update AR Module token definitions and validation prefixes.
- Reorder module addresses.
- Add kernel-doc for `struct param_id_audio_if_intf_cfg`.
- Remove unused code and stale comments.
- Clean up comments and naming in q6apm-lpass-ports.h.
- Add bindings for TDM slots
This series depends on:
- https://lore.kernel.org/all/20260607-rubikpi-next-20260605-v1-3-7f334e16fea6@thundersoft.com/
- https://lore.kernel.org/linux-arm-msm/20260608023011.942228-1-mohammad.rafi.shaik@oss.qualcomm.com/
Prasad Kumpatla (7):
ASoC: qcom: qdsp6: add topology-driven Audio IF support
ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations
dt-bindings: sound: qcom,q6dsp-lpass-ports: add Audio IF clocks
ASoC: qcom: q6prm: add Audio IF clock IDs
dt-bindings: sound: qcom,sm8250: allow TDM slot properties
ASoC: qcom: common: add DAI-node TDM slot helpers
ASoC: qcom: sc8280xp: add TDM hw_params support
.../bindings/sound/qcom,sm8250.yaml | 18 ++
.../sound/qcom,q6dsp-lpass-ports.h | 29 +++
include/uapi/sound/snd_ar_tokens.h | 89 ++++++++++
sound/soc/qcom/common.c | 165 ++++++++++++++++++
sound/soc/qcom/common.h | 14 ++
sound/soc/qcom/qdsp6/audioreach.c | 97 ++++++++++
sound/soc/qcom/qdsp6/audioreach.h | 81 +++++++++
sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 57 ++++++
sound/soc/qcom/qdsp6/q6prm-clocks.c | 28 +++
sound/soc/qcom/qdsp6/q6prm.h | 29 +++
sound/soc/qcom/qdsp6/topology.c | 105 +++++++++++
sound/soc/qcom/sc8280xp.c | 60 +++++++
12 files changed, 772 insertions(+)
base-commit: 5c73cd9f0819c1c44e373e3dabb68318b1de1a12
prerequisite-patch-id: 2f1bd3efac328030dd8efe28fb95f84603868043
prerequisite-patch-id: fa309c7712836e2ec2f2a7a130b80f07f28dbba2
prerequisite-patch-id: 84ee327c8398aee280cb16ca48e91d139b6effb6
prerequisite-patch-id: 668be29290a9ea342c0ece1cfec468d9cc6d0b27
--
2.34.1
next reply other threads:[~2026-07-07 19:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 19:00 Prasad Kumpatla [this message]
2026-07-07 19:01 ` [PATCH v3 1/7] ASoC: qcom: qdsp6: add topology-driven Audio IF support Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 2/7] ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 3/7] dt-bindings: sound: qcom,q6dsp-lpass-ports: add Audio IF clocks Prasad Kumpatla
2026-07-08 6:53 ` Krzysztof Kozlowski
2026-07-08 6:54 ` Krzysztof Kozlowski
2026-07-07 19:01 ` [PATCH v3 4/7] ASoC: qcom: q6prm: add Audio IF clock IDs Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 5/7] dt-bindings: sound: qcom,sm8250: allow TDM slot properties Prasad Kumpatla
2026-07-07 20:33 ` Rob Herring (Arm)
2026-07-08 18:34 ` Rob Herring
2026-07-07 19:01 ` [PATCH v3 6/7] ASoC: qcom: common: add DAI-node TDM slot helpers Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 7/7] ASoC: qcom: sc8280xp: add TDM hw_params support Prasad Kumpatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707190106.2876465-1-prasad.kumpatla@oss.qualcomm.com \
--to=prasad.kumpatla@oss.qualcomm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox