From: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
To: Srinivas Kandagatla <srini@kernel.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: linux-arm-msm@vger.kernel.org, linux-sound@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Subject: [PATCH v3 3/7] dt-bindings: sound: qcom,q6dsp-lpass-ports: add Audio IF clocks
Date: Wed, 8 Jul 2026 00:31:02 +0530 [thread overview]
Message-ID: <20260707190106.2876465-4-prasad.kumpatla@oss.qualcomm.com> (raw)
In-Reply-To: <20260707190106.2876465-1-prasad.kumpatla@oss.qualcomm.com>
Add the LPASS Audio IF clock IDs used by newer backend interfaces.
Platforms using Audio IF module backends request the interface bit
clocks through q6prm. Add the Audio IF IBIT and EBIT IDs to the binding
header so these clocks can be referenced from device trees.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
---
.../sound/qcom,q6dsp-lpass-ports.h | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
index 45850f2d4..a3aea029c 100644
--- a/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
+++ b/include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h
@@ -233,6 +233,35 @@
/* Clock ID for RX CORE MCLK2 2X MCLK */
#define LPASS_CLK_ID_RX_CORE_MCLK2_2X_MCLK 70
+#define LPASS_CLK_ID_INTF0_IBIT 71
+#define LPASS_CLK_ID_INTF0_EBIT 72
+#define LPASS_CLK_ID_INTF1_IBIT 73
+#define LPASS_CLK_ID_INTF1_EBIT 74
+#define LPASS_CLK_ID_INTF2_IBIT 75
+#define LPASS_CLK_ID_INTF2_EBIT 76
+#define LPASS_CLK_ID_INTF3_IBIT 77
+#define LPASS_CLK_ID_INTF3_EBIT 78
+#define LPASS_CLK_ID_INTF4_IBIT 79
+#define LPASS_CLK_ID_INTF4_EBIT 80
+#define LPASS_CLK_ID_INTF5_IBIT 81
+#define LPASS_CLK_ID_INTF5_EBIT 82
+#define LPASS_CLK_ID_INTF6_IBIT 83
+#define LPASS_CLK_ID_INTF6_EBIT 84
+#define LPASS_CLK_ID_INTF7_IBIT 85
+#define LPASS_CLK_ID_INTF7_EBIT 86
+#define LPASS_CLK_ID_INTF8_IBIT 87
+#define LPASS_CLK_ID_INTF8_EBIT 88
+#define LPASS_CLK_ID_INTF9_IBIT 89
+#define LPASS_CLK_ID_INTF9_EBIT 90
+#define LPASS_CLK_ID_INTF10_IBIT 91
+#define LPASS_CLK_ID_INTF10_EBIT 92
+#define LPASS_CLK_ID_INTF11_IBIT 93
+#define LPASS_CLK_ID_INTF11_EBIT 94
+#define LPASS_CLK_ID_INTF12_IBIT 95
+#define LPASS_CLK_ID_INTF12_EBIT 96
+#define LPASS_CLK_ID_VA_INTF0_IBIT 97
+#define LPASS_CLK_ID_VA_INTF0_EBIT 98
+
#define LPASS_HW_AVTIMER_VOTE 101
#define LPASS_HW_MACRO_VOTE 102
#define LPASS_HW_DCODEC_VOTE 103
--
2.34.1
next prev parent reply other threads:[~2026-07-07 19:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-07 19:00 [PATCH v3 0/7]ASoC: qcom: add AudioReach TDM backend support Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 1/7] ASoC: qcom: qdsp6: add topology-driven Audio IF support Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 2/7] ASoC: qcom: q6apm-lpass-dais: add TDM DAI operations Prasad Kumpatla
2026-07-07 19:01 ` Prasad Kumpatla [this message]
2026-07-08 6:53 ` [PATCH v3 3/7] dt-bindings: sound: qcom,q6dsp-lpass-ports: add Audio IF clocks Krzysztof Kozlowski
2026-07-08 6:54 ` Krzysztof Kozlowski
2026-07-07 19:01 ` [PATCH v3 4/7] ASoC: qcom: q6prm: add Audio IF clock IDs Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 5/7] dt-bindings: sound: qcom,sm8250: allow TDM slot properties Prasad Kumpatla
2026-07-07 20:33 ` Rob Herring (Arm)
2026-07-08 18:34 ` Rob Herring
2026-07-07 19:01 ` [PATCH v3 6/7] ASoC: qcom: common: add DAI-node TDM slot helpers Prasad Kumpatla
2026-07-07 19:01 ` [PATCH v3 7/7] ASoC: qcom: sc8280xp: add TDM hw_params support Prasad Kumpatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260707190106.2876465-4-prasad.kumpatla@oss.qualcomm.com \
--to=prasad.kumpatla@oss.qualcomm.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=srini@kernel.org \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox