[PATCH net-next v7 05/15] net: ethernet: oa_tc6: Move oa_tc6.c to its own directory

[Selvamani Rajagopal via B4 Relay <devnull+Selvamani.Rajagopal.onsemi.com@kernel.org>]

From: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>

Moving oa_tc6.c to its own directory, drivers/net/ethernet/oa_tc6. This
will facilitate adding more files to support other features
defined by OPEN Alliance 10BASE-T1x Serial Interface specification

This patch series is adding two files, one for hardware
timestamp related functions and one for PTP related APIs.

Signed-off-by: Selvamani Rajagopal <Selvamani.Rajagopal@onsemi.com>

---
changes in v7
  - No change
changes in v6
  - No change
changes in v5
  - No change
changes in v4
  - Removed reference to onsemi in Kconfig files
changes in v3
  - Moved oa_tc6.c to its own, oa_tc6 directory under ethernet.
  - First patch
---
 MAINTAINERS                                |  2 +-
 drivers/net/ethernet/Kconfig               | 12 +-----------
 drivers/net/ethernet/Makefile              |  2 +-
 drivers/net/ethernet/oa_tc6/Kconfig        | 16 ++++++++++++++++
 drivers/net/ethernet/oa_tc6/Makefile       |  7 +++++++
 drivers/net/ethernet/{ => oa_tc6}/oa_tc6.c |  0
 6 files changed, 26 insertions(+), 13 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index fab0804329db..c9b101d8e1fd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20219,7 +20219,7 @@ M:	Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/oa-tc6-framework.rst
-F:	drivers/net/ethernet/oa_tc6.c
+F:	drivers/net/ethernet/oa_tc6/oa_tc6*
 F:	include/linux/oa_tc6.h
 
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 78c79ad7bba5..49d93488ba52 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -134,6 +134,7 @@ source "drivers/net/ethernet/netronome/Kconfig"
 source "drivers/net/ethernet/8390/Kconfig"
 source "drivers/net/ethernet/nvidia/Kconfig"
 source "drivers/net/ethernet/nxp/Kconfig"
+source "drivers/net/ethernet/oa_tc6/Kconfig"
 source "drivers/net/ethernet/oki-semi/Kconfig"
 
 config ETHOC
@@ -146,17 +147,6 @@ config ETHOC
 	help
 	  Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
 
-config OA_TC6
-	tristate "OPEN Alliance TC6 10BASE-T1x MAC-PHY support" if COMPILE_TEST
-	depends on SPI
-	select PHYLIB
-	help
-	  This library implements OPEN Alliance TC6 10BASE-T1x MAC-PHY
-	  Serial Interface protocol for supporting 10BASE-T1x MAC-PHYs.
-
-	  To know the implementation details, refer documentation in
-	  <file:Documentation/networking/oa-tc6-framework.rst>.
-
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/pensando/Kconfig"
 source "drivers/net/ethernet/qlogic/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index bba55d9af387..77b11d5a7abf 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_NET_VENDOR_NETRONOME) += netronome/
 obj-$(CONFIG_NET_VENDOR_NI) += ni/
 obj-$(CONFIG_NET_VENDOR_NVIDIA) += nvidia/
 obj-$(CONFIG_LPC_ENET) += nxp/
+obj-$(CONFIG_OA_TC6) += oa_tc6/
 obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
 obj-$(CONFIG_ETHOC) += ethoc.o
 obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
@@ -104,4 +105,3 @@ obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
 obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
 obj-$(CONFIG_NET_VENDOR_SYNOPSYS) += synopsys/
 obj-$(CONFIG_NET_VENDOR_PENSANDO) += pensando/
-obj-$(CONFIG_OA_TC6) += oa_tc6.o
diff --git a/drivers/net/ethernet/oa_tc6/Kconfig b/drivers/net/ethernet/oa_tc6/Kconfig
new file mode 100644
index 000000000000..97345f345fb9
--- /dev/null
+++ b/drivers/net/ethernet/oa_tc6/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# OA TC6 10BASE-T1x MAC-PHY configuration
+#
+
+config OA_TC6
+	tristate "OPEN Alliance TC6 10BASE-T1x MAC-PHY support"
+	depends on SPI
+	select PHYLIB
+	help
+	  This library implements OPEN Alliance TC6 10BASE-T1x MAC-PHY
+	  Serial Interface protocol for supporting 10BASE-T1x MAC-PHYs.
+
+	  To know the implementation details, refer documentation in
+	  <file:Documentation/networking/oa-tc6-framework.rst>.
+
diff --git a/drivers/net/ethernet/oa_tc6/Makefile b/drivers/net/ethernet/oa_tc6/Makefile
new file mode 100644
index 000000000000..f24aae852ef2
--- /dev/null
+++ b/drivers/net/ethernet/oa_tc6/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for OA TC6 10BASE-T1x MAC-PHY
+#
+
+obj-$(CONFIG_OA_TC6) := oa_tc6_mod.o
+oa_tc6_mod-objs := oa_tc6.o
diff --git a/drivers/net/ethernet/oa_tc6.c b/drivers/net/ethernet/oa_tc6/oa_tc6.c
similarity index 100%
rename from drivers/net/ethernet/oa_tc6.c
rename to drivers/net/ethernet/oa_tc6/oa_tc6.c

-- 
2.43.0