Devicetree
 help / color / mirror / Atom feed
* [PATCH v8 0/2] Subject: Add Lontium LT9611C(EX/UXD) MIPI DSI to HDMI driver
@ 2026-07-28 11:09 mohit.dsor
  2026-07-28 11:09 ` [PATCH v8 1/2] dt-bindings: bridge: " mohit.dsor
  2026-07-28 11:09 ` [PATCH v8 2/2] drm/bridge: " mohit.dsor
  0 siblings, 2 replies; 5+ messages in thread
From: mohit.dsor @ 2026-07-28 11:09 UTC (permalink / raw)
  To: Sunyun Yang, Andrzej Hajda, Neil Armstrong, Robert Foss,
	Laurent Pinchart, Jonas Karlman, Jernej Skrabec, Luca Ceresoli,
	Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, David Airlie,
	Simona Vetter, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Vinod Koul
  Cc: dri-devel, devicetree, linux-kernel, Mohit Dsor, venkata.valluru,
	Jessica Zhang, Mohit Dsor

This series introduces:
  - A device tree binding YAML file describing the hardware
  - A new DRM bridge driver implementing the basic functionality

  LT9611C(EX/UXD) is an I2C-controlled chip that Receiver signal/dual port
  mipi dsi and output hdmi, differences in hardware features:
  - LT9611C: supports 1-port mipi dsi to hdmi 1.4
  - LT9611EX: supports 2-port mipi dsi to hdmi 1.4
  - LT9611UXD: supports 2-port mipi dsi to hdmi 1.4/2.0

  Changes in v8:
  - Refactor lt9611c_read_write_flow() to take a struct lt9611c_cmd parameter with an embedded struct lt9611c_cmd_hdr (func,
  type, seq, sep) and optional data payload, eliminating raw byte arrays at call sites
  - Add LT9611C_CMD_HDR_SIZE, LT9611C_EDID_BUF_SIZE constants to replace magic numbers
  - Use container_of_const() in bridge_to_lt9611c_const()
  - Remove obvious /*read only*/ comment
  - Use unsigned long cast instead of uintptr_t for chip type initialization
  - Replace memset + memcpy with memcpy + memset for CRC buffer preparation
  - Add ABI documentation for lt9611c_firmware sysfs attribute
  - Fix Kconfig help text to proper prose within line limits
  - Add disable_irq() before cancel_work_sync() in lt9611c_remove()
  - Add cancel_work_sync() in lt9611c_bridge_suspend()
  - Inline lt9611c_gpio_init() into probe
  - Use of_drm_get_bridge_by_endpoint() instead of drm_of_find_panel_or_bridge() + drm_bridge_get()
  - Return error if LT9611C (single DSI only) is configured with dual DSI in device tree
  - Move HPD status read_write_flow call from IRQ handler to lt9611c_hpd_work workqueue
  - Removed second lt9611_reset call from probe as not needed
  - Add struct lt9611c_rsp symmetric to struct lt9611c_cmd — both embed struct lt9611c_cmd_hdr
  - Link to v7: https://lore.kernel.org/lkml/20260716-lt9611c-v7-v7-0-7553a14735fc@oss.qualcomm.com/

  Changes in v7:
  - Use i2c_get_match_data() for chip type initialization
  - Implement hdmi_write_hdmi_infoframe/hdmi_clear_hdmi_infoframe
  - Use drm_atomic_commit in bridge callbacks
  - Removing redundant lt9611c_reset() call and cleanup in probe error
    path
  - Populate bridge.vendor and bridge.product
  - implement hpd_enable callback
  - fix DT parsing and bridge refcount
  - Removed pre_enable and post_disable callbacks, it was affecting hpd
    as regulator was disabled
  - Changed reset gpio enablement and lt9611c_reset api.
  - Link to v6: https://lore.kernel.org/all/20260508134009.4582-1-syyang@lontium.com/

  Changes in v6:
  - dt-binding:
   1. sorted the compatible list alphabetically.                     [Dmitry]
  - Link to v5: https://lore.kernel.org/lkml/20260507024214.97708-1-syyang@lontium.com/

  Changes in v5:
  - drm/bridge:
   1. use #define FW_FILE "Lontium/lt9611c_fw.bin" to match linux-firmware    [Dmitry]
   2. add atomic state management
  - Link to v4: https://lore.kernel.org/lkml/20260506095100.78998-1-syyang@lontium.com/

  Changes in v4:
  - dt-binding:
   1. fix commit message                                                    [Krzysztof]
  - drm/bridge:
   1. use lt9611c_fw.bin                                                     [Dmitry]
   3. use enum lt9611_chip_type
   4. remove *fw from the lt9611c struct
   5. use read_poll_timeout and -ETIMEDOUT
   6. replace mutex_lock with guard(mutex) in some places
   7. switch to ARRAY_SIZE instead of specifying lengths directly
   8. use dev_err_probe
   9. add clear functions for AVI and audio infoframes
   10. add DRM_BRIDGE_OP_HDMI and remove .hpd_notify
   11. replace "GPL v2" with "GPL"
  - Link to v3: https://lore.kernel.org/lkml/20260420061644.1251070-1-syyang@lontium.com/

  Changes in v3:
  - dt-binding:
   1. lt9611c(ex/uxd) content merged into lontium,lt9611.yaml
  - drm/bridge:
   1. Drop the licence text, only use SPDX header
   2. Sort the headers
   3. Use library functions for crc8
   4. Use paged writes as implemented for LT9611C(EX/UXD)
   5. Use HDMI audio helpers
   6. Replace devm_kzalloc with devm_drm_bridge_alloc
   7. Remove extra kthread
  - Link to v1: https://lore.kernel.org/lkml/20250903123825.1721443-1-syyang@lontium.com/

  Changes in v2:
   1. Forget modify code, operation error, Please disregard this submit.

  Changes in v1:
  - dt-binding:
   1. Submit the first version of the code.
  - drm/bridge:
   1. Submit the first version of the code.

Signed-off-by: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
---
Sunyun Yang (2):
      dt-bindings: bridge: Add Lontium LT9611C(EX/UXD) MIPI DSI to HDMI driver
      drm/bridge: Add Lontium LT9611C(EX/UXD) MIPI DSI to HDMI driver

 .../ABI/testing/sysfs-driver-lontium-lt9611c       |   11 +
 .../bindings/display/bridge/lontium,lt9611.yaml    |    8 +-
 drivers/gpu/drm/bridge/Kconfig                     |   17 +
 drivers/gpu/drm/bridge/Makefile                    |    1 +
 drivers/gpu/drm/bridge/lontium-lt9611c.c           | 1344 ++++++++++++++++++++
 5 files changed, 1379 insertions(+), 2 deletions(-)
---
base-commit: 34e27b90552acf21bd73aac395667c8aae6da480
change-id: 20260708-lt9611c-v7-ff76b2d1bf5f

Best regards,
--  
Mohit Dsor <mohit.dsor@oss.qualcomm.com>


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2026-07-28 11:26 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-07-28 11:09 [PATCH v8 0/2] Subject: Add Lontium LT9611C(EX/UXD) MIPI DSI to HDMI driver mohit.dsor
2026-07-28 11:09 ` [PATCH v8 1/2] dt-bindings: bridge: " mohit.dsor
2026-07-28 11:14   ` sashiko-bot
2026-07-28 11:09 ` [PATCH v8 2/2] drm/bridge: " mohit.dsor
2026-07-28 11:26   ` sashiko-bot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox