* [PATCH v9 1/2] dt-bindings: PCI: xilinx-versal-cpm: Add PERST# and reset support
2026-08-07 14:02 [PATCH v9 0/2] Add support for PCIe RP PERST# Sai Krishna Musham
@ 2026-08-07 14:02 ` Sai Krishna Musham
2026-08-07 14:19 ` sashiko-bot
2026-08-07 14:02 ` [PATCH v9 2/2] PCI: xilinx-cpm: Add support for PCIe RP PERST# signal Sai Krishna Musham
1 sibling, 1 reply; 5+ messages in thread
From: Sai Krishna Musham @ 2026-08-07 14:02 UTC (permalink / raw)
To: bhelgaas, lpieralisi, kw, mani, robh, krzk+dt, conor+dt, cassel
Cc: linux-pci, devicetree, linux-kernel, michal.simek,
bharat.kumar.gogada, thippeswamy.havalige, sai.krishna.musham
Add the optional 'resets' property to manage the PCIe IP reset, and the
'reset-gpios' property on the Root Port child node for GPIO-based control
of the PCIe RP PERST# signal (assert/deassert). Both are optional to keep
backward compatibility with existing device trees.
Update the examples to show the reset controller and PERST# GPIO wiring.
Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
---
Changes in v9:
- None
Changes in v8:
- Add resets property.
- Move reset-gpios property to child node and update the example.
v1: https://lore.kernel.org/all/20250224063046.1438006-2-sai.krishna.musham@amd.com/
v2: https://lore.kernel.org/all/20250226124358.88227-2-sai.krishna.musham@amd.com/
v3: https://lore.kernel.org/all/20250227042454.907182-2-sai.krishna.musham@amd.com/
v4: https://lore.kernel.org/all/20250318092648.2298280-2-sai.krishna.musham@amd.com/
v5: https://lore.kernel.org/all/20250321114211.2185782-2-sai.krishna.musham@amd.com/
v6: https://lore.kernel.org/all/20250326022811.3090688-2-sai.krishna.musham@amd.com/
v7: https://lore.kernel.org/all/20250414032304.862779-2-sai.krishna.musham@amd.com/
v8: https://lore.kernel.org/all/20260807123507.3418671-2-sai.krishna.musham@amd.com/
---
.../bindings/pci/xilinx-versal-cpm.yaml | 38 +++++++++++++++++++
1 file changed, 38 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index 9823456addea..a28a88dc8e88 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -41,6 +41,10 @@ properties:
description:
Maps a Requester ID to an MSI controller and associated MSI sideband data.
+ resets:
+ description: Reset for the PCIe controller.
+ maxItems: 1
+
ranges:
maxItems: 2
@@ -61,6 +65,17 @@ properties:
interrupt-controller: true
+patternProperties:
+ '^pcie@[0-2],0$':
+ type: object
+ $ref: /schemas/pci/pci-pci-bridge.yaml#
+
+ properties:
+ reg:
+ maxItems: 1
+
+ unevaluatedProperties: false
+
required:
- reg
- reg-names
@@ -76,6 +91,9 @@ unevaluatedProperties: false
examples:
- |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/reset/xlnx-versal-resets.h>
+
versal {
#address-cells = <2>;
#size-cells = <2>;
@@ -99,6 +117,16 @@ examples:
reg = <0x0 0xfca10000 0x0 0x1000>,
<0x6 0x00000000 0x0 0x10000000>;
reg-names = "cpm_slcr", "cfg";
+ resets = <&versal_reset VERSAL_RST_PCIE_CORE0>;
+
+ pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
pcie_intc_0: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -127,6 +155,16 @@ examples:
<0x06 0x00000000 0x00 0x1000000>,
<0x00 0xfce20000 0x00 0x1000000>;
reg-names = "cpm_slcr", "cfg", "cpm_csr";
+ resets = <&versal_reset VERSAL_RST_PCIE_CORE0>;
+
+ pcie@0,0 {
+ device_type = "pci";
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ reset-gpios = <&gpio1 38 GPIO_ACTIVE_LOW>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+ };
pcie_intc_1: interrupt-controller {
#address-cells = <0>;
--
2.44.4
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v9 2/2] PCI: xilinx-cpm: Add support for PCIe RP PERST# signal
2026-08-07 14:02 [PATCH v9 0/2] Add support for PCIe RP PERST# Sai Krishna Musham
2026-08-07 14:02 ` [PATCH v9 1/2] dt-bindings: PCI: xilinx-versal-cpm: Add PERST# and reset support Sai Krishna Musham
@ 2026-08-07 14:02 ` Sai Krishna Musham
2026-08-07 14:30 ` sashiko-bot
1 sibling, 1 reply; 5+ messages in thread
From: Sai Krishna Musham @ 2026-08-07 14:02 UTC (permalink / raw)
To: bhelgaas, lpieralisi, kw, mani, robh, krzk+dt, conor+dt, cassel
Cc: linux-pci, devicetree, linux-kernel, michal.simek,
bharat.kumar.gogada, thippeswamy.havalige, sai.krishna.musham
Add support for the PCIe Root Port PERST# signal using the GPIO
framework, along with the PCIe IP reset. This reset is managed
by the driver and occurs after the Initial Power Up sequence
(PCIe CEM r6.0, 2.2.1) is handled in hardware before the driver's
probe function is called.
This is useful in warm reset scenarios where the power rails stay stable
and only PERST# is toggled. Applying both the IP reset and PERST# resets
the Root Port controller and Endpoint synchronously, improving
reliability and avoiding lane errors.
Both the reset GPIO and the reset controller are optional to keep
backward compatibility with existing DTBs. Also add a PCIE_T_PERST_US
(100 us) macro in pci.h for the PERST# active time (PCIe CEM r6.0,
sec 2.11.2, "T_PERST").
As part of this, update the interrupt controller node parsing to use
of_get_child_by_name() instead of of_get_next_child(), since the PCIe
host bridge node now has multiple children. This ensures the correct
node is selected during initialization.
Signed-off-by: Sai Krishna Musham <sai.krishna.musham@amd.com>
---
Changes in v9:
- Fix reset sequence when only PERST# GPIO is present.
- Replace mdelay() with msleep() to avoid busy-waiting.
- Remove explicit declaration of `pcie_port_node`
Changes in v8:
- Use resets framework for handling PCIe IP reset.
- Update source to parse reset-gpios from child node.
- Update PCIE_T_PERST_US macro in pci.h
- Remove PERST# support for CPM5NC.
v1: https://lore.kernel.org/all/20250224063046.1438006-3-sai.krishna.musham@amd.com/
v2: https://lore.kernel.org/all/20250226124358.88227-3-sai.krishna.musham@amd.com/
v3: https://lore.kernel.org/all/20250227042454.907182-3-sai.krishna.musham@amd.com/
v4: https://lore.kernel.org/all/20250318092648.2298280-3-sai.krishna.musham@amd.com/
v5: https://lore.kernel.org/all/20250321114211.2185782-3-sai.krishna.musham@amd.com/
v6: https://lore.kernel.org/all/20250326022811.3090688-3-sai.krishna.musham@amd.com/
v7: https://lore.kernel.org/all/20250414032304.862779-3-sai.krishna.musham@amd.com/
v8: https://lore.kernel.org/all/20260807123507.3418671-3-sai.krishna.musham@amd.com/
---
drivers/pci/controller/pcie-xilinx-cpm.c | 77 +++++++++++++++++++++++-
drivers/pci/pci.h | 9 +++
2 files changed, 85 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/controller/pcie-xilinx-cpm.c b/drivers/pci/controller/pcie-xilinx-cpm.c
index d38f27e20761..1fdd7f920590 100644
--- a/drivers/pci/controller/pcie-xilinx-cpm.c
+++ b/drivers/pci/controller/pcie-xilinx-cpm.c
@@ -6,6 +6,8 @@
*/
#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
@@ -16,6 +18,7 @@
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
+#include <linux/reset.h>
#include "../pci.h"
#include "pcie-xilinx-common.h"
@@ -113,6 +116,8 @@ struct xilinx_cpm_variant {
* @irq: Error interrupt number
* @lock: lock protecting shared register access
* @variant: CPM version check pointer
+ * @perst_gpio: GPIO descriptor for PERST# signal handling
+ * @rstc: Pointer to the PCIe controller reset
*/
struct xilinx_cpm_pcie {
struct device *dev;
@@ -125,6 +130,8 @@ struct xilinx_cpm_pcie {
int irq;
raw_spinlock_t lock;
const struct xilinx_cpm_variant *variant;
+ struct gpio_desc *perst_gpio;
+ struct reset_control *rstc;
};
static u32 pcie_read(struct xilinx_cpm_pcie *port, u32 reg)
@@ -389,7 +396,7 @@ static int xilinx_cpm_pcie_init_irq_domain(struct xilinx_cpm_pcie *port)
struct device_node *pcie_intc_node;
/* Setup INTx */
- pcie_intc_node = of_get_next_child(node, NULL);
+ pcie_intc_node = of_get_child_by_name(node, "interrupt-controller");
if (!pcie_intc_node) {
dev_err(dev, "No PCIe Intc node found\n");
return -EINVAL;
@@ -469,6 +476,22 @@ static int xilinx_cpm_setup_irq(struct xilinx_cpm_pcie *port)
return 0;
}
+/**
+ * xilinx_cpm_pcie_reset - Reset the PCIe controller and deassert PERST#
+ * @port: PCIe port information
+ *
+ * Reset the PCIe controller and then release the PERST# signal so that the
+ * link can train once the bridge is enabled.
+ */
+static void xilinx_cpm_pcie_reset(struct xilinx_cpm_pcie *port)
+{
+ reset_control_assert(port->rstc);
+ udelay(PCIE_T_PERST_US);
+ reset_control_deassert(port->rstc);
+ gpiod_set_value_cansleep(port->perst_gpio, 0);
+ msleep(PCIE_RESET_CONFIG_WAIT_MS);
+}
+
/**
* xilinx_cpm_pcie_init_port - Initialize hardware
* @port: PCIe port information
@@ -480,6 +503,9 @@ static void xilinx_cpm_pcie_init_port(struct xilinx_cpm_pcie *port)
if (variant->version == CPM5NC_HOST)
return;
+ if (port->perst_gpio || port->rstc)
+ xilinx_cpm_pcie_reset(port);
+
if (cpm_pcie_link_up(port))
dev_info(port->dev, "PCIe Link is UP\n");
else
@@ -512,6 +538,42 @@ static void xilinx_cpm_pcie_init_port(struct xilinx_cpm_pcie *port)
XILINX_CPM_PCIE_REG_RPSC);
}
+/**
+ * xilinx_cpm_pcie_parse_port - Parse the PCIe Root Port child node
+ * @port: PCIe port information
+ *
+ * Read the PERST# GPIO from the Root Port child node.
+ *
+ * Return: '0' on success and error value on failure
+ */
+static int xilinx_cpm_pcie_parse_port(struct xilinx_cpm_pcie *port)
+{
+ struct device *dev = port->dev;
+
+ /*
+ * This platform currently supports only one Root Port, so the loop
+ * will execute only once.
+ * TODO: Enhance the driver to handle multiple Root Ports in the future.
+ */
+ for_each_child_of_node_with_prefix(dev->of_node, pcie_port_node, "pcie") {
+ port->perst_gpio = devm_fwnode_gpiod_get(dev,
+ of_fwnode_handle(pcie_port_node),
+ "reset", GPIOD_OUT_HIGH,
+ NULL);
+ if (IS_ERR(port->perst_gpio)) {
+ if (PTR_ERR(port->perst_gpio) == -ENOENT) {
+ port->perst_gpio = NULL;
+ return 0;
+ }
+ return dev_err_probe(dev, PTR_ERR(port->perst_gpio),
+ "Failed to request reset GPIO\n");
+ }
+ return 0;
+ }
+
+ return 0;
+}
+
/**
* xilinx_cpm_pcie_parse_dt - Parse Device tree
* @port: PCIe port information
@@ -525,6 +587,19 @@ static int xilinx_cpm_pcie_parse_dt(struct xilinx_cpm_pcie *port,
struct device *dev = port->dev;
struct platform_device *pdev = to_platform_device(dev);
struct resource *res;
+ int ret;
+
+ /* CPM5NC does not support PERST# handling yet */
+ if (port->variant->version != CPM5NC_HOST) {
+ port->rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
+ if (IS_ERR(port->rstc))
+ return dev_err_probe(dev, PTR_ERR(port->rstc),
+ "Failed to request reset\n");
+
+ ret = xilinx_cpm_pcie_parse_port(port);
+ if (ret)
+ return ret;
+ }
port->cpm_base = devm_platform_ioremap_resource_byname(pdev,
"cpm_slcr");
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 4469e1a77f3c..bf53354dc5a9 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -39,6 +39,15 @@ struct pcie_tlp_log;
*/
#define PCIE_T_PERST_CLK_US 100
+/*
+ * PERST# active time.
+ *
+ * See the "Power Sequencing and Reset Signal Timings" table of the PCI Express
+ * Card Electromechanical Specification, Revision 6.0, Section 2.11.2, Symbol
+ * "T_PERST".
+ */
+#define PCIE_T_PERST_US 100
+
/*
* PCIe r6.0, sec 5.3.3.2.1 <PME Synchronization>
* Recommends 1ms to 10ms timeout to check L2 ready.
--
2.44.4
^ permalink raw reply related [flat|nested] 5+ messages in thread