Devicetree
 help / color / mirror / Atom feed
* [PATCH v3 0/4] Add support for AD5710R/AD5711R DAC
@ 2026-08-17  6:37 Kim Seer Paller
  2026-08-17  6:37 ` [PATCH v3 1/4] iio: ABI: Add DAC current powerdown attributes and 15kohm_to_gnd mode Kim Seer Paller
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Kim Seer Paller @ 2026-08-17  6:37 UTC (permalink / raw)
  To: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
	Michael Hennerich, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Philipp Zabel
  Cc: linux-iio, linux-kernel, linux, devicetree, Kim Seer Paller

The AD5710R (16-bit) and AD5711R (12-bit) are 8-channel, low-power,
configurable current/voltage output DACs with an on-chip 2.5V reference.
Each channel can be independently configured as a voltage output
(0V to VREF or 0V to 2xVREF) or a current output (0mA to 50mA).

This series adds support for these parts:
 - ABI documentation for the high_z powerdown mode and the current-output
   powerdown attributes
 - device tree bindings for the AD5710R/AD5711R
 - basic IIO DAC driver, supporting per-channel voltage/current output
   selection, per-channel powerdown, software or hardware (LDAC) DAC
   updates, optional output range doubling, internal or external
   reference, and hardware reset (with a software-reset fallback).

Datasheet:
https://www.analog.com/media/en/technical-documentation/data-sheets/ad5711r-ad5710r.pdf

Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
---
Changes in v3:
- ad3530r: factor the op-mode register/mask computation into a helper
  shared by the powerdown access and channel parsing.
- ad3530r: pass iio_dev into setup/parse and set channels/num_channels
  directly, dropping the duplicated pointers in driver state.
- ad3530r: use regmap_test_bits() for the powerdown reads and drop the
  unused AD5710R_NUM_CHANNELS macro.
- ad3530r: split the file header comment into separate AD5710R/AD5711R lines.
- dt-bindings: drop the redundant items wrapper on channel reg and tidy
  the 2 x Vref wording.
- Link to v2: https://patch.msgid.link/20260721-iio-ad5710r-upstream-v2-0-324949dc72da@analog.com

Changes in v2:
- Drop the standalone ad5710r driver and fold AD5710R/AD5711R support
  into the existing ad3530r driver.
- Add a preparatory patch parameterizing the DAC resolution in ad3530r
  so the 12-/16-bit AD5711R/AD5710R can reuse the raw/scale paths.
- ABI: drop the "high_z" powerdown mode, which is a synonym of the
  existing "three_state" and use "three_state" instead.
- Link to v1: https://patch.msgid.link/20260716-iio-ad5710r-upstream-v1-0-e848a4bb701f@analog.com

To: Jonathan Cameron <jic23@kernel.org>
To: David Lechner <dlechner@baylibre.com>
To: Nuno Sá <nuno.sa@analog.com>
To: Andy Shevchenko <andy@kernel.org>
To: Michael Hennerich <Michael.Hennerich@analog.com>
To: Kim Seer Paller <kimseer.paller@analog.com>
To: Rob Herring <robh@kernel.org>
To: Krzysztof Kozlowski <krzk+dt@kernel.org>
To: Conor Dooley <conor+dt@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux@analog.com
Cc: devicetree@vger.kernel.org

---
Kim Seer Paller (4):
      iio: ABI: Add DAC current powerdown attributes and 15kohm_to_gnd mode
      dt-bindings: iio: dac: add adi,ad5710r.yaml
      iio: dac: ad3530r: parameterize DAC resolution
      iio: dac: ad3530r: add support for AD5710R/AD5711R

 Documentation/ABI/testing/sysfs-bus-iio            |   5 +
 .../devicetree/bindings/iio/dac/adi,ad5710r.yaml   | 143 ++++++++++
 MAINTAINERS                                        |   1 +
 drivers/iio/dac/Kconfig                            |   1 +
 drivers/iio/dac/ad3530r.c                          | 302 +++++++++++++++++++--
 5 files changed, 430 insertions(+), 22 deletions(-)
---
base-commit: fc69c7ed31f2c36d0232a6d04750acec8f9e0c31
change-id: 20260716-iio-ad5710r-upstream-e41c298614c6

Best regards,
--  
Kim Seer Paller <kimseer.paller@analog.com>


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2026-08-17  6:52 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-17  6:37 [PATCH v3 0/4] Add support for AD5710R/AD5711R DAC Kim Seer Paller
2026-08-17  6:37 ` [PATCH v3 1/4] iio: ABI: Add DAC current powerdown attributes and 15kohm_to_gnd mode Kim Seer Paller
2026-08-17  6:43   ` sashiko-bot
2026-08-17  6:37 ` [PATCH v3 2/4] dt-bindings: iio: dac: add adi,ad5710r.yaml Kim Seer Paller
2026-08-17  6:45   ` sashiko-bot
2026-08-17  6:37 ` [PATCH v3 3/4] iio: dac: ad3530r: parameterize DAC resolution Kim Seer Paller
2026-08-17  6:37 ` [PATCH v3 4/4] iio: dac: ad3530r: add support for AD5710R/AD5711R Kim Seer Paller
2026-08-17  6:52   ` sashiko-bot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox