[PATCH 4/4] arm64: dts: st: Add UCPD node on stm32mp251

[Marek Vasut <marex@nabladev.com>]

Add ST UCPD Type-C block node on stm32mp251. The UCPD integrates the
physical layer of the Power Delivery (PD), with CC signaling method,
for operation with Type-C cables. Vbus and Vconn control is performed
using an external chip, usually ST TCPP01/TCPP02/TCPP03 or similar.
The UCPD Rp/Rd resistor trimming values are part of OTP, add the nvmem
subnode and include a phandle to it.

Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: devicetree@vger.kernel.org
Cc: kernel@dh-electronics.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-usb@vger.kernel.org
---
 arch/arm64/boot/dts/st/stm32mp251.dtsi | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 9c63fdb5a885a..0d4ce4d7e124a 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -1637,6 +1637,21 @@ dcmipp: dcmipp@48030000 {
 				status = "disabled";
 			};
 
+			ucpd: phy@480a0000 {
+				compatible = "st,stm32mp25-ucpd";
+				reg = <0x480a0000 0x1000>;
+				access-controllers = <&rifsc 69>;
+				clocks = <&rcc CK_BUS_USBTC>, <&rcc CK_KER_USBTC>;
+				clock-names = "apb", "ker";
+				interrupts-extended = <&exti1 46 IRQ_TYPE_LEVEL_HIGH>;
+				nvmem-cells = <&ucpdtrim>;
+				nvmem-cell-names = "trim";
+				power-domains = <&CLUSTER_PD>;
+				resets = <&rcc USBTC_R>;
+				reset-names = "phy";
+				status = "disabled";
+			};
+
 			combophy: phy@480c0000 {
 				compatible = "st,stm32mp25-combophy";
 				reg = <0x480c0000 0x1000>;
@@ -1781,6 +1796,11 @@ package-otp@1e8 {
 				reg = <0x1e8 0x1>;
 				bits = <0 3>;
 			};
+
+			ucpdtrim: atrim3@1e8 {
+				reg = <0x1e8 0x4>;
+				bits = <4 16>;
+			};
 		};
 
 		hdp: pinctrl@44090000 {
-- 
2.53.0