Devicetree
 help / color / mirror / Atom feed
* [PATCH v2 1/1] media: dt-bindings: move ovti,ov2659.txt into ovti,ov8858.yaml
@ 2026-08-27 19:04 Frank.Li
  2026-08-27 19:12 ` sashiko-bot
  0 siblings, 1 reply; 2+ messages in thread
From: Frank.Li @ 2026-08-27 19:04 UTC (permalink / raw)
  To: Lad, Prabhakar, Mauro Carvalho Chehab, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Frank Li,
	open list:OV2659 OMNIVISION SENSOR DRIVER,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
	open list
  Cc: imx

From: Frank Li <Frank.Li@nxp.com>

Convert the OmniVision OV2659 camera sensor binding from plain text to
YAML schema format.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
change in v2
- drop rob's review by because use new file
- use new file ovti,2659 according to sakari's feedback
- v1 (2025) https://lore.kernel.org/imx/aPdHqCWNdmVkch7S@valkosipuli.retiisi.eu/
---
 .../bindings/media/i2c/ovti,ov2659.txt        | 47 ---------
 .../bindings/media/i2c/ovti,ov2659.yaml       | 95 +++++++++++++++++++
 2 files changed, 95 insertions(+), 47 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov2659.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt b/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
deleted file mode 100644
index 92989a619f292..0000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* OV2659 1/5-Inch 2Mp SOC Camera
-
-The Omnivision OV2659 is a 1/5-inch SOC camera, with an active array size of
-1632H x 1212V. It is programmable through a SCCB. The OV2659 sensor supports
-multiple resolutions output, such as UXGA, SVGA, 720p. It also can support
-YUV422, RGB565/555 or raw RGB output formats.
-
-Required Properties:
-- compatible: Must be "ovti,ov2659"
-- reg: I2C slave address
-- clocks: reference to the xvclk input clock.
-- clock-names: should be "xvclk".
-- link-frequencies: target pixel clock frequency.
-
-Optional Properties:
-- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
-  Active high with internal pull down resistor.
-- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
-  Active low with internal pull up resistor.
-
-For further reading on port node refer to
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	i2c0@1c22000 {
-		...
-		...
-		 ov2659@30 {
-			compatible = "ovti,ov2659";
-			reg = <0x30>;
-
-			clocks = <&clk_ov2659 0>;
-			clock-names = "xvclk";
-
-			powerdown-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
-
-			port {
-				ov2659_0: endpoint {
-					remote-endpoint = <&vpfe_ep>;
-					link-frequencies = /bits/ 64 <70000000>;
-				};
-			};
-		};
-		...
-	};
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.yaml
new file mode 100644
index 0000000000000..926e5cd966b8d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2659.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov2659.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV2659 1/5-Inch 2Mp SOC Camera
+
+maintainers:
+  - Frank Li <Frank.Li@kernel.org>
+
+description:
+  The Omnivision OV2659 is a 1/5-inch SOC camera, with an active array size of
+  1632H x 1212V. It is programmable through a SCCB. The OV2659 sensor supports
+  multiple resolutions output, such as UXGA, SVGA, 720p. It also can support
+  YUV422, RGB565/555 or raw RGB output formats.
+
+properties:
+  compatible:
+    const: ovti,ov2659
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: xvclk
+
+  powerdown-gpios:
+    description:
+      Reference to the GPIO connected to the pwdn pin, if any.
+      Active high with internal pull down resistor.
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      Reference to the GPIO connected to the resetb pin, if any.
+      Active low with internal pull up resistor.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          link-frequencies:
+            description: Target pixel clock frequency.
+            maxItems: 1
+
+        required:
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@30 {
+            compatible = "ovti,ov2659";
+            reg = <0x30>;
+
+            clocks = <&clk_ov2659 0>;
+            clock-names = "xvclk";
+
+            powerdown-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&vpfe_ep>;
+                    link-frequencies = /bits/ 64 <70000000>;
+                };
+            };
+        };
+    };
-- 
2.43.0


^ permalink raw reply related	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2026-08-27 19:12 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-08-27 19:04 [PATCH v2 1/1] media: dt-bindings: move ovti,ov2659.txt into ovti,ov8858.yaml Frank.Li
2026-08-27 19:12 ` sashiko-bot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox