[PATCH v2 03/13] regulator: ab8500: Handle AB8505 VINTCORE selector 7

[Linus Walleij <linusw@kernel.org>]

The AB8505 VINTCORE table exposes only selectors 0 through 6. The
hardware also accepts selector 7 and maps it to 1.35 V, just like
selector 6. Omitting it can make an OTP-programmed selector 7 appear
invalid to the regulator core.

Give AB8505 its own eight-entry selector table while leaving the
AB8500 table unchanged.

Reference: AB8505 User Manual, DM00046744 Rev 3, p. 223

Fixes: 547f384f33db ("regulator: ab8500: add support for ab8505")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
 drivers/regulator/ab8500.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 07d96f8ff944..5e24e6cdc773 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -266,6 +266,17 @@ static const unsigned int ldo_vintcore_voltages[] = {
 	1350000,
 };
 
+static const unsigned int ldo_vintcore_ab8505_voltages[] = {
+	1200000,
+	1225000,
+	1250000,
+	1275000,
+	1300000,
+	1325000,
+	1350000,
+	1350000,
+};
+
 static const unsigned int fixed_1200000_voltage[] = {
 	1200000,
 };
@@ -1095,8 +1106,8 @@ static struct ab8500_regulator_info
 			.type		= REGULATOR_VOLTAGE,
 			.id		= AB8505_LDO_INTCORE,
 			.owner		= THIS_MODULE,
-			.n_voltages	= ARRAY_SIZE(ldo_vintcore_voltages),
-			.volt_table	= ldo_vintcore_voltages,
+			.n_voltages	= ARRAY_SIZE(ldo_vintcore_ab8505_voltages),
+			.volt_table	= ldo_vintcore_ab8505_voltages,
 		},
 		.load_lp_uA		= 5000,
 		.update_bank		= 0x03,

-- 
2.55.0