From: Linus Walleij <linusw@kernel.org>
To: Stephan Gerhold <stephan@gerhold.net>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Axel Lin <axel.lin@ingics.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>
Cc: devicetree@vger.kernel.org, mfd@lists.linux.dev,
Linus Walleij <linusw@kernel.org>
Subject: [PATCH v2 05/13] regulator: ab8500: Test dedicated enable bits only
Date: Tue, 01 Sep 2026 22:02:10 +0200 [thread overview]
Message-ID: <20260901-ux500-dts-snowball-regulator-v2-5-fe88b01829bf@kernel.org> (raw)
In-Reply-To: <20260901-ux500-dts-snowball-regulator-v2-0-fe88b01829bf@kernel.org>
Some regulator control registers have independent enable and low-power
bits. is_enabled() currently tests their combined update mask, so an
off regulator with its low-power bit set is incorrectly reported as
enabled.
Add an optional enable mask and use it for VINTCORE, AB8500 TVOUT,
AB8505 ADC, and AB8505 VAUX5/6. Regulators whose two-bit field encodes
the complete operating state continue to test the full update mask.
References: AB8500 User Manual, UM0836 Rev 3, p. 214;
AB8505 User Manual, DM00046744 Rev 3, pp. 171-172 and 223
Fixes: 65e03ed2d0cd ("regulators: Fixed errors in ab8500 register mapping")
Assisted-by: LLM
Signed-off-by: Linus Walleij <linusw@kernel.org>
---
drivers/regulator/ab8500.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 42cb8dfdc7c9..05c6b9c7af0c 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -162,6 +162,7 @@ struct ab8500_shared_mode {
* @update_bank: bank to control on/off
* @update_reg: register to control on/off
* @update_mask: mask to enable/disable and set mode of regulator
+ * @enable_mask: optional mask for an enable bit separate from the mode bit
* @update_val: bits holding the regulator current mode
* @update_val_idle: bits to enable the regulator in idle (low power) mode
* @update_val_normal: bits to enable the regulator in normal (high power) mode
@@ -183,6 +184,7 @@ struct ab8500_regulator_info {
u8 update_bank;
u8 update_reg;
u8 update_mask;
+ u8 enable_mask;
u8 update_val;
u8 update_val_idle;
u8 update_val_normal;
@@ -377,6 +379,7 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
{
int ret;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
+ u8 enable_mask;
u8 regval;
if (info == NULL) {
@@ -392,13 +395,15 @@ static int ab8500_regulator_is_enabled(struct regulator_dev *rdev)
return ret;
}
+ enable_mask = info->enable_mask ? info->enable_mask : info->update_mask;
+
dev_vdbg(rdev_get_dev(rdev),
"%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x,"
" 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
- info->update_mask, regval);
+ enable_mask, regval);
- if (regval & info->update_mask)
+ if (regval & enable_mask)
return 1;
else
return 0;
@@ -833,6 +838,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
+ .enable_mask = 0x04,
.update_val = 0x44,
.update_val_idle = 0x44,
.update_val_normal = 0x04,
@@ -861,6 +867,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
+ .enable_mask = 0x02,
.update_val = 0x02,
.update_val_idle = 0x82,
.update_val_normal = 0x02,
@@ -1070,6 +1077,7 @@ static struct ab8500_regulator_info
.update_bank = 0x01,
.update_reg = 0x55,
.update_mask = 0x18,
+ .enable_mask = 0x10,
.update_val = 0x10,
.update_val_idle = 0x18,
.update_val_normal = 0x10,
@@ -1092,6 +1100,7 @@ static struct ab8500_regulator_info
.update_bank = 0x01,
.update_reg = 0x56,
.update_mask = 0x18,
+ .enable_mask = 0x10,
.update_val = 0x10,
.update_val_idle = 0x18,
.update_val_normal = 0x10,
@@ -1113,6 +1122,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x44,
+ .enable_mask = 0x04,
.update_val = 0x04,
.update_val_idle = 0x44,
.update_val_normal = 0x04,
@@ -1141,6 +1151,7 @@ static struct ab8500_regulator_info
.update_bank = 0x03,
.update_reg = 0x80,
.update_mask = 0x82,
+ .enable_mask = 0x02,
.update_val = 0x02,
.update_val_idle = 0x82,
.update_val_normal = 0x02,
--
2.55.0
next prev parent reply other threads:[~2026-09-01 20:02 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-01 20:02 [PATCH v2 00/13] Add AB8500 buck regulators to the Ux500 device tree Linus Walleij
2026-09-01 20:02 ` [PATCH v2 01/13] regulator: ab8500: Fix AB8505 VANA voltage selectors Linus Walleij
2026-09-01 20:09 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 02/13] regulator: ab8500: Add AB8505 VAUX3 3.05 V setting Linus Walleij
2026-09-01 20:08 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 03/13] regulator: ab8500: Handle AB8505 VINTCORE selector 7 Linus Walleij
2026-09-01 20:15 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 04/13] regulator: ab8500: Treat cut 1.0 VAUX3 as fixed Linus Walleij
2026-09-01 20:17 ` sashiko-bot
2026-09-01 20:02 ` Linus Walleij [this message]
2026-09-01 20:21 ` [PATCH v2 05/13] regulator: ab8500: Test dedicated enable bits only sashiko-bot
2026-09-01 20:02 ` [PATCH v2 06/13] regulator: ab8500: Propagate mode enable read errors Linus Walleij
2026-09-01 20:26 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 07/13] regulator: ab8500: Use linear ranges for LDO voltages Linus Walleij
2026-09-01 20:27 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 08/13] dt-bindings: mfd: ab8500: Add regulators Linus Walleij
2026-09-01 20:30 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 09/13] regulator: ab8500: Add buck converter support Linus Walleij
2026-09-01 20:31 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 10/13] regulator: ab8500: Preserve OTP-enabled buck regulators Linus Walleij
2026-09-01 20:38 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 11/13] regulator: ab8500: Use scoped guard for shared mode mutex Linus Walleij
2026-09-01 20:37 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 12/13] ARM: dts: ux500: Add new AB8500/AB8505 regulators Linus Walleij
2026-09-01 20:41 ` sashiko-bot
2026-09-01 20:02 ` [PATCH v2 13/13] ARM: dts: ux500: Fix up regulator assignments Linus Walleij
2026-09-01 20:45 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260901-ux500-dts-snowball-regulator-v2-5-fe88b01829bf@kernel.org \
--to=linusw@kernel.org \
--cc=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lee@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=mfd@lists.linux.dev \
--cc=robh@kernel.org \
--cc=stephan@gerhold.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox