Devicetree
 help / color / mirror / Atom feed
From: Shawn Guo <shengchao.guo@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
	Yu Zhang <yu.zhang@oss.qualcomm.com>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Abel Vesa <abel.vesa@oss.qualcomm.com>,
	Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>,
	Shawn Guo <shengchao.guo@oss.qualcomm.com>
Subject: [PATCH v2 1/5] arm64: dts: qcom: nord: Add PCIe PHY and controller nodes
Date: Tue, 15 Sep 2026 09:56:28 +0800	[thread overview]
Message-ID: <20260915015632.283642-2-shengchao.guo@oss.qualcomm.com> (raw)
In-Reply-To: <20260915015632.283642-1-shengchao.guo@oss.qualcomm.com>

From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>

Nord has four PCIe controllers backed by a single quadfurcated Gen5
QMP PHY with four ports (A/B/C/D) and a common PCIe SMMU.  The ports
can be ganged into x16, x8+x8, x8+x4+x4 or x8+x4+x2+x2 topologies; the
topology in effect is selected by firmware through the TCSR link-config
mode register, which the PHY driver reads at probe time.  Describe the
x8+x4+x2+x2 topology, i.e. all four controllers usable, as that is the
configuration the boards ship with.

Add the controller and SMMU nodes to nord.dtsi, and the PHY node along
with the per-controller clocks, resets, GDSCs, interconnects, OPP tables
and TLMM pin states to nord-embedded.dtsi.  The four PCIe pipe clocks
also become available now, so hook them up as GCC parents in place of
the <0> placeholders.

The controllers and the PHY are left disabled here and enabled per
board.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/nord-embedded.dtsi | 926 +++++++++++++++++++-
 arch/arm64/boot/dts/qcom/nord.dtsi          | 297 +++++++
 2 files changed, 1219 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/nord-embedded.dtsi b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
index c7ac2e66632e..6e79f3cb20e9 100644
--- a/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
+++ b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
@@ -342,6 +342,738 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>,
 	pinctrl-names = "default";
 };
 
+&pcie0 {
+	clocks = <&gcc GCC_PCIE_A_AUX_CLK>,
+		 <&gcc GCC_PCIE_A_CFG_AHB_CLK>,
+		 <&gcc GCC_PCIE_A_MSTR_AXI_CLK>,
+		 <&gcc GCC_PCIE_A_SLV_AXI_CLK>,
+		 <&gcc GCC_PCIE_A_SLV_Q2A_AXI_CLK>;
+	clock-names = "aux",
+		      "cfg",
+		      "bus_master",
+		      "bus_slave",
+		      "slave_q2a";
+
+	assigned-clocks = <&gcc GCC_PCIE_A_AUX_CLK>;
+	assigned-clock-rates = <19200000>;
+
+	interconnects = <&pcie_data_inbound MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+			 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+			<&hscnoc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+			 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+	interconnect-names = "pcie-mem",
+			     "cpu-pcie";
+
+	power-domains = <&gcc GCC_PCIE_A_GDSC>;
+
+	resets = <&gcc GCC_PCIE_A_BCR>,
+		 <&gcc GCC_PCIE_A_LINK_DOWN_BCR>;
+	reset-names = "pci",
+		      "link_down";
+
+	pinctrl-0 = <&pcie0_default>;
+	pinctrl-names = "default";
+
+	operating-points-v2 = <&pcie0_opp_table>;
+
+	pcie0_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		/* GEN 1 x1 */
+		opp-2500000-1 {
+			opp-hz = /bits/ 64 <2500000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <250000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x2 */
+		opp-5000000-1 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x4 */
+		opp-10000000-1 {
+			opp-hz = /bits/ 64 <10000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1000000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x8 */
+		opp-20000000-1 {
+			opp-hz = /bits/ 64 <20000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <2000000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x16 */
+		opp-40000000-1 {
+			opp-hz = /bits/ 64 <40000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <4000000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 2 x1 */
+		opp-5000000-2 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x2 */
+		opp-10000000-2 {
+			opp-hz = /bits/ 64 <10000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x4 */
+		opp-20000000-2 {
+			opp-hz = /bits/ 64 <20000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <2000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x8 */
+		opp-40000000-2 {
+			opp-hz = /bits/ 64 <40000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <4000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x16 */
+		opp-80000000-2 {
+			opp-hz = /bits/ 64 <80000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <8000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 3 x1 */
+		opp-8000000-3 {
+			opp-hz = /bits/ 64 <8000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <984500 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x2 */
+		opp-16000000-3 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x4 */
+		opp-32000000-3 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x8 */
+		opp-64000000-3 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x16 */
+		opp-128000000-3 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <15753000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 4 x1 */
+		opp-16000000-4 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x2 */
+		opp-32000000-4 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x4 */
+		opp-64000000-4 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x8 */
+		opp-128000000-4 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <15753000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x16 */
+		opp-256000000-4 {
+			opp-hz = /bits/ 64 <256000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <31506000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 5 x1 */
+		opp-32000000-5 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x2 */
+		opp-64000000-5 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x4 */
+		opp-128000000-5 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <15753000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x8 */
+		opp-256000000-5 {
+			opp-hz = /bits/ 64 <256000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <31506000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x16 */
+		opp-512000000-5 {
+			opp-hz = /bits/ 64 <512000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <63012000 1>;
+			opp-level = <5>;
+		};
+	};
+};
+
+&pcie0_port0 {
+	phys = <&pcie_phy 0>;
+};
+
+&pcie1 {
+	clocks = <&gcc GCC_PCIE_B_AUX_CLK>,
+		 <&gcc GCC_PCIE_B_CFG_AHB_CLK>,
+		 <&gcc GCC_PCIE_B_MSTR_AXI_CLK>,
+		 <&gcc GCC_PCIE_B_SLV_AXI_CLK>,
+		 <&gcc GCC_PCIE_B_SLV_Q2A_AXI_CLK>;
+	clock-names = "aux",
+		      "cfg",
+		      "bus_master",
+		      "bus_slave",
+		      "slave_q2a";
+
+	assigned-clocks = <&gcc GCC_PCIE_B_AUX_CLK>;
+	assigned-clock-rates = <19200000>;
+
+	interconnects = <&pcie_data_inbound MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
+			 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+			<&hscnoc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+			 &config_noc SLAVE_PCIE_1 QCOM_ICC_TAG_ALWAYS>;
+	interconnect-names = "pcie-mem",
+			     "cpu-pcie";
+
+	power-domains = <&gcc GCC_PCIE_B_GDSC>;
+
+	resets = <&gcc GCC_PCIE_B_BCR>,
+		 <&gcc GCC_PCIE_B_LINK_DOWN_BCR>;
+	reset-names = "pci",
+		      "link_down";
+
+	pinctrl-0 = <&pcie1_default>;
+	pinctrl-names = "default";
+
+	operating-points-v2 = <&pcie1_opp_table>;
+
+	pcie1_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		/* GEN 1 x1 */
+		opp-2500000-1 {
+			opp-hz = /bits/ 64 <2500000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <250000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x2 */
+		opp-5000000-1 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x4 */
+		opp-10000000-1 {
+			opp-hz = /bits/ 64 <10000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1000000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x8 */
+		opp-20000000-1 {
+			opp-hz = /bits/ 64 <20000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <2000000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 2 x1 */
+		opp-5000000-2 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x2 */
+		opp-10000000-2 {
+			opp-hz = /bits/ 64 <10000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x4 */
+		opp-20000000-2 {
+			opp-hz = /bits/ 64 <20000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <2000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x8 */
+		opp-40000000-2 {
+			opp-hz = /bits/ 64 <40000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <4000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 3 x1 */
+		opp-8000000-3 {
+			opp-hz = /bits/ 64 <8000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <984500 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x2 */
+		opp-16000000-3 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x4 */
+		opp-32000000-3 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x8 */
+		opp-64000000-3 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 4 x1 */
+		opp-16000000-4 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x2 */
+		opp-32000000-4 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x4 */
+		opp-64000000-4 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x8 */
+		opp-128000000-4 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <15753000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 5 x1 */
+		opp-32000000-5 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x2 */
+		opp-64000000-5 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x4 */
+		opp-128000000-5 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <15753000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x8 */
+		opp-256000000-5 {
+			opp-hz = /bits/ 64 <256000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <31506000 1>;
+			opp-level = <5>;
+		};
+	};
+};
+
+&pcie1_port0 {
+	phys = <&pcie_phy 1>;
+};
+
+&pcie2 {
+	clocks = <&gcc GCC_PCIE_C_AUX_CLK>,
+		 <&gcc GCC_PCIE_C_CFG_AHB_CLK>,
+		 <&gcc GCC_PCIE_C_MSTR_AXI_CLK>,
+		 <&gcc GCC_PCIE_C_SLV_AXI_CLK>,
+		 <&gcc GCC_PCIE_C_SLV_Q2A_AXI_CLK>;
+	clock-names = "aux",
+		      "cfg",
+		      "bus_master",
+		      "bus_slave",
+		      "slave_q2a";
+
+	assigned-clocks = <&gcc GCC_PCIE_C_AUX_CLK>;
+	assigned-clock-rates = <19200000>;
+
+	interconnects = <&pcie_data_inbound MASTER_PCIE_2 QCOM_ICC_TAG_ALWAYS
+			 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+			<&hscnoc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+			 &config_noc SLAVE_PCIE_2 QCOM_ICC_TAG_ALWAYS>;
+	interconnect-names = "pcie-mem",
+			     "cpu-pcie";
+
+	power-domains = <&gcc GCC_PCIE_C_GDSC>;
+
+	resets = <&gcc GCC_PCIE_C_BCR>,
+		 <&gcc GCC_PCIE_C_LINK_DOWN_BCR>;
+	reset-names = "pci",
+		      "link_down";
+
+	pinctrl-0 = <&pcie2_default>;
+	pinctrl-names = "default";
+
+	operating-points-v2 = <&pcie2_opp_table>;
+
+	pcie2_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		/* GEN 1 x1 */
+		opp-2500000-1 {
+			opp-hz = /bits/ 64 <2500000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <250000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x2 */
+		opp-5000000-1 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x4 */
+		opp-10000000-1 {
+			opp-hz = /bits/ 64 <10000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1000000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 2 x1 */
+		opp-5000000-2 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x2 */
+		opp-10000000-2 {
+			opp-hz = /bits/ 64 <10000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x4 */
+		opp-20000000-2 {
+			opp-hz = /bits/ 64 <20000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <2000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 3 x1 */
+		opp-8000000-3 {
+			opp-hz = /bits/ 64 <8000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <984500 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x2 */
+		opp-16000000-3 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x4 */
+		opp-32000000-3 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 4 x1 */
+		opp-16000000-4 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x2 */
+		opp-32000000-4 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x4 */
+		opp-64000000-4 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 5 x1 */
+		opp-32000000-5 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x2 */
+		opp-64000000-5 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x4 */
+		opp-128000000-5 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <15753000 1>;
+			opp-level = <5>;
+		};
+	};
+};
+
+&pcie2_port0 {
+	phys = <&pcie_phy 2>;
+};
+
+&pcie3 {
+	clocks = <&gcc GCC_PCIE_D_AUX_CLK>,
+		 <&gcc GCC_PCIE_D_CFG_AHB_CLK>,
+		 <&gcc GCC_PCIE_D_MSTR_AXI_CLK>,
+		 <&gcc GCC_PCIE_D_SLV_AXI_CLK>,
+		 <&gcc GCC_PCIE_D_SLV_Q2A_AXI_CLK>;
+	clock-names = "aux",
+		      "cfg",
+		      "bus_master",
+		      "bus_slave",
+		      "slave_q2a";
+
+	assigned-clocks = <&gcc GCC_PCIE_D_AUX_CLK>;
+	assigned-clock-rates = <19200000>;
+
+	interconnects = <&pcie_data_inbound MASTER_PCIE_3 QCOM_ICC_TAG_ALWAYS
+			 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+			<&hscnoc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+			 &config_noc SLAVE_PCIE_3 QCOM_ICC_TAG_ALWAYS>;
+	interconnect-names = "pcie-mem",
+			     "cpu-pcie";
+
+	power-domains = <&gcc GCC_PCIE_D_GDSC>;
+
+	resets = <&gcc GCC_PCIE_D_BCR>,
+		 <&gcc GCC_PCIE_D_LINK_DOWN_BCR>;
+	reset-names = "pci",
+		      "link_down";
+
+	pinctrl-0 = <&pcie3_default>;
+	pinctrl-names = "default";
+
+	operating-points-v2 = <&pcie3_opp_table>;
+
+	pcie3_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		/* GEN 1 x1 */
+		opp-2500000-1 {
+			opp-hz = /bits/ 64 <2500000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <250000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 1 x2 */
+		opp-5000000-1 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <1>;
+		};
+
+		/* GEN 2 x1 */
+		opp-5000000-2 {
+			opp-hz = /bits/ 64 <5000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <500000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 2 x2 */
+		opp-10000000-2 {
+			opp-hz = /bits/ 64 <10000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1000000 1>;
+			opp-level = <2>;
+		};
+
+		/* GEN 3 x1 */
+		opp-8000000-3 {
+			opp-hz = /bits/ 64 <8000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <984500 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 3 x2 */
+		opp-16000000-3 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <3>;
+		};
+
+		/* GEN 4 x1 */
+		opp-16000000-4 {
+			opp-hz = /bits/ 64 <16000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <1969000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 4 x2 */
+		opp-32000000-4 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <4>;
+		};
+
+		/* GEN 5 x1 */
+		opp-32000000-5 {
+			opp-hz = /bits/ 64 <32000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <3938000 1>;
+			opp-level = <5>;
+		};
+
+		/* GEN 5 x2 */
+		opp-64000000-5 {
+			opp-hz = /bits/ 64 <64000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+			opp-peak-kBps = <7876000 1>;
+			opp-level = <5>;
+		};
+	};
+};
+
+&pcie3_port0 {
+	phys = <&pcie_phy 3>;
+};
+
 &qupv3_0 {
 	clocks = <&segcc SE_GCC_QUPV3_WRAP0_M_AHB_CLK>,
 		 <&segcc SE_GCC_QUPV3_WRAP0_S_AHB_CLK>;
@@ -704,10 +1436,10 @@ gcc: clock-controller@100000 {
 		reg = <0x0 0x00100000 0x0 0x1f4200>;
 		clocks = <&bi_tcxo_div2>,
 			 <&sleep_clk>,
-			 <0>,
-			 <0>,
-			 <0>,
-			 <0>;
+			 <&pcie_phy 0>,
+			 <&pcie_phy 1>,
+			 <&pcie_phy 2>,
+			 <&pcie_phy 3>;
 		#clock-cells = <1>;
 		#reset-cells = <1>;
 		#power-domain-cells = <1>;
@@ -774,6 +1506,100 @@ mmss_noc: interconnect@1780000 {
 		qcom,bcm-voters = <&apps_bcm_voter>;
 	};
 
+	pcie_phy: phy@1b00000 {
+		compatible = "qcom,nord-qmp-gen5x16-pcie-phy";
+
+		reg = <0x0 0x01b00000 0x0 0x10000>,
+		      <0x0 0x01b10000 0x0 0x10000>,
+		      <0x0 0x01b20000 0x0 0x10000>,
+		      <0x0 0x01b30000 0x0 0x10000>;
+		reg-names = "port_a",
+			    "port_b",
+			    "port_c",
+			    "port_d";
+
+		clocks = <&gcc GCC_PCIE_A_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_A_CFG_AHB_CLK>,
+			 <&tcsrcc TCSR_PCIE_CLKREF_EN>,
+			 <&gcc GCC_PCIE_A_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_A_PIPE_CLK>,
+			 <&gcc GCC_PCIE_B_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_B_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_B_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_B_PIPE_CLK>,
+			 <&gcc GCC_PCIE_C_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_C_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_C_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_C_PIPE_CLK>,
+			 <&gcc GCC_PCIE_D_PHY_AUX_CLK>,
+			 <&gcc GCC_PCIE_D_CFG_AHB_CLK>,
+			 <&gcc GCC_PCIE_D_PHY_RCHNG_CLK>,
+			 <&gcc GCC_PCIE_D_PIPE_CLK>;
+		clock-names = "aux_a",
+			      "cfg_ahb_a",
+			      "ref",
+			      "rchng_a",
+			      "pipe_a",
+			      "aux_b",
+			      "cfg_ahb_b",
+			      "rchng_b",
+			      "pipe_b",
+			      "aux_c",
+			      "cfg_ahb_c",
+			      "rchng_c",
+			      "pipe_c",
+			      "aux_d",
+			      "cfg_ahb_d",
+			      "rchng_d",
+			      "pipe_d";
+
+		assigned-clocks = <&gcc GCC_PCIE_A_PHY_RCHNG_CLK>,
+				  <&gcc GCC_PCIE_B_PHY_RCHNG_CLK>,
+				  <&gcc GCC_PCIE_C_PHY_RCHNG_CLK>,
+				  <&gcc GCC_PCIE_D_PHY_RCHNG_CLK>;
+		assigned-clock-rates = <100000000>,
+				       <100000000>,
+				       <100000000>,
+				       <100000000>;
+
+		power-domains = <&gcc GCC_PCIE_A_PHY_GDSC>,
+				<&gcc GCC_PCIE_B_PHY_GDSC>,
+				<&gcc GCC_PCIE_C_PHY_GDSC>,
+				<&gcc GCC_PCIE_D_PHY_GDSC>;
+		power-domain-names = "port_a",
+				     "port_b",
+				     "port_c",
+				     "port_d";
+
+		resets = <&gcc GCC_PCIE_A_PHY_COM_BCR>,
+			 <&gcc GCC_PCIE_A_NOCSR_COM_PHY_BCR>,
+			 <&gcc GCC_PCIE_B_PHY_COM_BCR>,
+			 <&gcc GCC_PCIE_B_NOCSR_COM_PHY_BCR>,
+			 <&gcc GCC_PCIE_C_PHY_COM_BCR>,
+			 <&gcc GCC_PCIE_C_NOCSR_COM_PHY_BCR>,
+			 <&gcc GCC_PCIE_D_PHY_COM_BCR>,
+			 <&gcc GCC_PCIE_D_NOCSR_COM_PHY_BCR>;
+		reset-names = "port_a",
+			      "port_a_nocsr",
+			      "port_b",
+			      "port_b_nocsr",
+			      "port_c",
+			      "port_c_nocsr",
+			      "port_d",
+			      "port_d_nocsr";
+
+		qcom,link-mode = <&tcsr 0x71050>;
+
+		#clock-cells = <1>;
+		clock-output-names = "pcie_a_pipe_clk",
+				     "pcie_b_pipe_clk",
+				     "pcie_c_pipe_clk",
+				     "pcie_d_pipe_clk";
+		#phy-cells = <1>;
+
+		status = "disabled";
+	};
+
 	pcie_cfg: interconnect@1ba0000 {
 		compatible = "qcom,nord-pcie-cfg";
 		reg = <0x0 0x01ba0000 0x0 0x7200>;
@@ -998,6 +1824,98 @@ nsp_data_noc_3: interconnect@1fe00000 {
 };
 
 &tlmm {
+	pcie0_default: pcie0-default-state {
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clk_req_n";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie1_default: pcie1-default-state {
+		wake-pins {
+			pins = "gpio3";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		clkreq-pins {
+			pins = "gpio4";
+			function = "pcie1_clk_req_n";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie2_default: pcie2-default-state {
+		wake-pins {
+			pins = "gpio6";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		clkreq-pins {
+			pins = "gpio7";
+			function = "pcie2_clk_req_n";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio8";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	pcie3_default: pcie3-default-state {
+		wake-pins {
+			pins = "gpio9";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		clkreq-pins {
+			pins = "gpio10";
+			function = "pcie3_clk_req_n";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio11";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
 	qup_i2c0_default: qup-i2c0-default-state {
 		pins = "gpio111", "gpio112";
 		function = "qup0_se0";
diff --git a/arch/arm64/boot/dts/qcom/nord.dtsi b/arch/arm64/boot/dts/qcom/nord.dtsi
index 83760341456b..0fb292074b99 100644
--- a/arch/arm64/boot/dts/qcom/nord.dtsi
+++ b/arch/arm64/boot/dts/qcom/nord.dtsi
@@ -1587,6 +1587,290 @@ rng: rng@10c3000 {
 			reg = <0x0 0x010c3000 0x0 0x1000>;
 		};
 
+		pcie0: pci@1b80000 {
+			compatible = "qcom,nord-pcie", "qcom,pcie-sa8775p";
+
+			reg = <0x00 0x01b80000 0x00 0x00004000>,
+			      <0x00 0x40000000 0x00 0x00000f20>,
+			      <0x00 0x40000f20 0x00 0x000000a8>,
+			      <0x00 0x40010000 0x00 0x00020000>,
+			      <0x00 0x40100000 0x00 0x00100000>,
+			      <0x00 0x01b84000 0x00 0x00001000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0xfd00000>;
+
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			num-lanes = <8>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			dma-coherent;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommu-map = <0x0 &pcie_smmu 0x0000 0x10000>;
+
+			msi-map = <0x0 &gic_its 0x80000 0x10000>;
+
+			status = "disabled";
+
+			pcie0_port0: pcie@0 {
+				compatible = "pciclass,0604";
+				reg = <0 0 0 0 0>;
+				bus-range = <0x01 0xff>;
+				device_type = "pci";
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie1: pci@1b88000 {
+			compatible = "qcom,nord-pcie", "qcom,pcie-sa8775p";
+
+			reg = <0x00 0x01b88000 0x00 0x00004000>,
+			      <0x00 0x50000000 0x00 0x00000f20>,
+			      <0x00 0x50000f20 0x00 0x000000a8>,
+			      <0x00 0x50010000 0x00 0x00010000>,
+			      <0x00 0x50100000 0x00 0x00100000>,
+			      <0x00 0x01b8c000 0x00 0x00001000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0xfd00000>;
+
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			linux,pci-domain = <1>;
+			num-lanes = <4>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			dma-coherent;
+
+			interrupts = <GIC_SPI 834 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 833 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 842 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 824 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 949 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 835 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 351 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 830 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 348 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-map = <0x0 &gic_its 0x90000 0x10000>;
+
+			iommu-map = <0x0 &pcie_smmu 0x10000 0x10000>;
+
+			status = "disabled";
+
+			pcie1_port0: pcie@0 {
+				device_type = "pci";
+				compatible = "pciclass,0604";
+				reg = <0 0 0 0 0>;
+				bus-range = <0x01 0xff>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie2: pci@1b90000 {
+			compatible = "qcom,nord-pcie", "qcom,pcie-sa8775p";
+
+			reg = <0x00 0x01b90000 0x00 0x00004000>,
+			      <0x00 0x60000000 0x00 0x00000f20>,
+			      <0x00 0x60000f20 0x00 0x000000a8>,
+			      <0x00 0x60010000 0x00 0x00010000>,
+			      <0x00 0x60100000 0x00 0x00100000>,
+			      <0x00 0x01b94000 0x00 0x00001000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0xfd00000>;
+
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			linux,pci-domain = <2>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			dma-coherent;
+
+			interrupts = <GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 838 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 825 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 837 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 263 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 154 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 110 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 258 IRQ_TYPE_LEVEL_HIGH>;
+
+			iommu-map = <0x0 &pcie_smmu 0x20000 0x10000>;
+
+			msi-map = <0x0 &gic_its 0xa0000 0x10000>;
+
+			status = "disabled";
+
+			pcie2_port0: pcie@0 {
+				device_type = "pci";
+				compatible = "pciclass,0604";
+				reg = <0 0 0 0 0>;
+				bus-range = <0x01 0xff>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie3: pci@1b98000 {
+			compatible = "qcom,nord-pcie", "qcom,pcie-sa8775p";
+
+			reg = <0x00 0x01b98000 0x00 0x00004000>,
+			      <0x00 0x70000000 0x00 0x00000f20>,
+			      <0x00 0x70000f20 0x00 0x000000a8>,
+			      <0x00 0x70010000 0x00 0x00010000>,
+			      <0x00 0x70100000 0x00 0x00100000>,
+			      <0x00 0x01b9c000 0x00 0x00001000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0xfd00000>;
+
+			bus-range = <0x00 0xff>;
+			device_type = "pci";
+			linux,pci-domain = <3>;
+			num-lanes = <2>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			dma-coherent;
+
+			interrupts = <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 831 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 840 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 823 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 111 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 246 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 239 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 234 IRQ_TYPE_LEVEL_HIGH>;
+
+			msi-map = <0x0 &gic_its 0xb0000 0x10000>;
+
+			iommu-map = <0x0 &pcie_smmu 0x30000 0x10000>;
+
+			status = "disabled";
+
+			pcie3_port0: pcie@0 {
+				device_type = "pci";
+				compatible = "pciclass,0604";
+				reg = <0 0 0 0 0>;
+				bus-range = <0x01 0xff>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
 		ufs_mem_hc: ufshc@1d44000 {
 			compatible = "qcom,nord-ufshc",
 				     "qcom,ufshc",
@@ -1736,6 +2020,19 @@ ipcc0: mailbox@9007000 {
 			#mbox-cells = <2>;
 		};
 
+		pcie_smmu: iommu@9980000 {
+			compatible = "arm,smmu-v3";
+			reg = <0x0 0x09980000 0x0 0x20000>;
+			interrupts = <GIC_SPI 898 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 900 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 902 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eventq",
+					  "cmdq-sync",
+					  "gerror";
+			dma-coherent;
+			#iommu-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,nord-pdc",
 				     "qcom,pdc";
-- 
2.43.0


  reply	other threads:[~2026-09-15  1:56 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-15  1:56 [PATCH v2 0/5] arm64: dts: qcom: nord: Add PCIe and WLAN support Shawn Guo
2026-09-15  1:56 ` Shawn Guo [this message]
2026-09-15  1:56 ` [PATCH v2 2/5] arm64: dts: qcom: nord-rrd: Enable PCIe controllers and PHY Shawn Guo
2026-09-15  1:56 ` [PATCH v2 3/5] arm64: dts: qcom: nord-ride-embedded: " Shawn Guo
2026-09-15  1:56 ` [PATCH v2 4/5] arm64: dts: qcom: nord-ride-embedded: Add WCN7850 WLAN support Shawn Guo
2026-09-15  1:56 ` [PATCH v2 5/5] arm64: dts: qcom: nord-rrd: " Shawn Guo
2026-09-28  1:56 ` [PATCH v2 0/5] arm64: dts: qcom: nord: Add PCIe and " Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260915015632.283642-2-shengchao.guo@oss.qualcomm.com \
    --to=shengchao.guo@oss.qualcomm.com \
    --cc=abel.vesa@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=bartosz.golaszewski@oss.qualcomm.com \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krishna.chundru@oss.qualcomm.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=yu.zhang@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox