[PATCH v2 3/5] arm64: dts: qcom: nord-ride-embedded: Enable PCIe controllers and PHY

[Shawn Guo <shengchao.guo@oss.qualcomm.com>]

From: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>

The Nord Ride Embedded board routes all four PCIe links, so enable
pcie0-pcie3 and the QMP PHY, supply the per-port PHY and PLL rails, and
describe the PERST# and WAKE# lines of each root port.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
 .../boot/dts/qcom/nord-ride-embedded.dts      | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts b/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
index 09ee525764ef..0b230551a49f 100644
--- a/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
+++ b/arch/arm64/boot/dts/qcom/nord-ride-embedded.dts
@@ -366,6 +366,55 @@ vreg_l3l_1p8: ldo3 {
 	};
 };
 
+&pcie_phy {
+	vdda-phy-a-supply = <&vreg_l6a_1p2>;
+	vdda-phy-b-supply = <&vreg_l4a_1p2>;
+	vdda-phy-c-supply = <&vreg_l4a_1p2>;
+	vdda-phy-d-supply = <&vreg_l4a_1p2>;
+	vdda-pll-a-supply = <&vreg_l1e_0p9>;
+	vdda-pll-b-supply = <&vreg_l1e_0p9>;
+	vdda-pll-c-supply = <&vreg_l1e_0p9>;
+	vdda-pll-d-supply = <&vreg_l1e_0p9>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie0_port0 {
+	reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie1_port0 {
+	reset-gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&pcie2_port0 {
+	reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+};
+
+&pcie3 {
+	status = "okay";
+};
+
+&pcie3_port0 {
+	reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
+};
+
 &qupv3_0 {
 	firmware-name = "qcom/nord/qupv3fw.elf";
 
-- 
2.43.0