Devicetree
 help / color / mirror / Atom feed
From: Shawn Guo <shengchao.guo@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>,
	Yu Zhang <yu.zhang@oss.qualcomm.com>,
	devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Shawn Guo <shengchao.guo@oss.qualcomm.com>
Subject: [PATCH v2 0/5] arm64: dts: qcom: nord: Add PCIe and WLAN support
Date: Tue, 15 Sep 2026 09:56:27 +0800	[thread overview]
Message-ID: <20260915015632.283642-1-shengchao.guo@oss.qualcomm.com> (raw)

This series enables PCIe on the Qualcomm Nord SoC and brings up the WLAN
modules on the two reference boards.

Nord has four PCIe controllers fed by a single quadfurcated Gen5 QMP
multi-PHY.  The link topology (x16, x8+x8, x8+x4+x4 or x8+x4+x2+x2) is
selected by firmware through a TCSR register that the PHY driver reads at
probe time, so the DT only describes the PHY ports and hands the driver
the TCSR handle.  Patch 1 adds the PHY, the four controllers and the PCIe
SMMU; patches 2 and 3 enable them on the IQ10 Robotics Reference Design
and the Ride Embedded board respectively, along with the per-port PERST#
and WAKE# lines.

Patches 4 and 5 add the WCN7850 WLAN module sitting on PCIe2 on both
boards.  The two boards power the module differently: the Ride Embedded
connectivity adapter card derives the core rails from the module DBUs
gated by PWR_CORE and PWR_CTRL1, whereas the RRD generates them with
discrete on-board bucks behind a single core power enable.  Both are
described as they are wired.

This depends on the Nord Gen5x16 multi-PHY driver support [1], without
which the PHY does not probe.

Dependencies:
- PCIe and PHY: https://lore.kernel.org/all/20260909-nord-v3-0-b0a82721c547@oss.qualcomm.com/
- DTS prerequisite: https://lore.kernel.org/all/20260904081619.593602-1-shengchao.guo@oss.qualcomm.com/

Changes for v2:
- Add missing leading zero for pcie_smmu reg property
- Link to v1: https://lore.kernel.org/all/20260914071944.164217-1-shengchao.guo@oss.qualcomm.com/

Krishna Chaitanya Chundru (3):
  arm64: dts: qcom: nord: Add PCIe PHY and controller nodes
  arm64: dts: qcom: nord-rrd: Enable PCIe controllers and PHY
  arm64: dts: qcom: nord-ride-embedded: Enable PCIe controllers and PHY

Shawn Guo (1):
  arm64: dts: qcom: nord-rrd: Add WCN7850 WLAN support

Yu Zhang(Yuriy) (1):
  arm64: dts: qcom: nord-ride-embedded: Add WCN7850 WLAN support

 arch/arm64/boot/dts/qcom/nord-embedded.dtsi   | 926 +++++++++++++++++-
 .../boot/dts/qcom/nord-ride-embedded.dts      | 151 +++
 arch/arm64/boot/dts/qcom/nord-rrd.dts         | 158 +++
 arch/arm64/boot/dts/qcom/nord.dtsi            | 297 ++++++
 4 files changed, 1528 insertions(+), 4 deletions(-)

-- 
2.43.0


             reply	other threads:[~2026-09-15  1:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-15  1:56 Shawn Guo [this message]
2026-09-15  1:56 ` [PATCH v2 1/5] arm64: dts: qcom: nord: Add PCIe PHY and controller nodes Shawn Guo
2026-10-10  2:34   ` Shawn Guo
2026-09-15  1:56 ` [PATCH v2 2/5] arm64: dts: qcom: nord-rrd: Enable PCIe controllers and PHY Shawn Guo
2026-09-15  1:56 ` [PATCH v2 3/5] arm64: dts: qcom: nord-ride-embedded: " Shawn Guo
2026-09-15  1:56 ` [PATCH v2 4/5] arm64: dts: qcom: nord-ride-embedded: Add WCN7850 WLAN support Shawn Guo
2026-09-15  1:56 ` [PATCH v2 5/5] arm64: dts: qcom: nord-rrd: " Shawn Guo
2026-09-28  1:56 ` [PATCH v2 0/5] arm64: dts: qcom: nord: Add PCIe and " Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260915015632.283642-1-shengchao.guo@oss.qualcomm.com \
    --to=shengchao.guo@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=brgl@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krishna.chundru@oss.qualcomm.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=yu.zhang@oss.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox