[PATCH v2 4/4] arm64: dts: qcom: nord: Fix videocc clock inputs

[Shawn Guo <shengchao.guo@oss.qualcomm.com>]

The video clock controller binding describes three clock inputs for
Nord: the board XO, the always-on board XO and the 32 kHz sleep clock.
The videocc node instead passes the board XO and NW_GCC_VIDEO_AHB_CLK,
which is not an input of the controller.

Pass bi_tcxo_ao_div2 and the board sleep clock in place of the AHB
clock. No functional change, NW_GCC_VIDEO_AHB_CLK is kept always on by
the NW GCC driver.

Assisted-by: LLM
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/nord-embedded.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/nord-embedded.dtsi b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
index 1ab7d9bc3cfe..62d14be55839 100644
--- a/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
+++ b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
@@ -886,7 +886,8 @@ videocc: clock-controller@aaf0000 {
 		compatible = "qcom,nord-videocc";
 		reg = <0x0 0x0aaf0000 0x0 0x10000>;
 		clocks = <&bi_tcxo_div2>,
-			 <&nwgcc NW_GCC_VIDEO_AHB_CLK>;
+			 <&bi_tcxo_ao_div2>,
+			 <&sleep_clk>;
 		power-domains = <&rpmhpd RPMHPD_MMCX>,
 				<&rpmhpd RPMHPD_MXC>;
 		required-opps = <&rpmhpd_opp_low_svs>,
-- 
2.43.0