[PATCH 4/7] gpio: pl061: use IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH

[Long Zhao via B4 Relay <devnull+longzhao.ambarella.com@kernel.org>]

From: Long Zhao <longzhao@ambarella.com>

Use the standard IRQ_TYPE_LEVEL_MASK and IRQ_TYPE_EDGE_BOTH helpers
instead of open-coded edge and level comparisons.

Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Long Zhao <longzhao@ambarella.com>
---
 drivers/gpio/gpio-pl061.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 2b1e23fdb7d7..35aabe4beff6 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -168,9 +168,7 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 	if (offset < 0 || offset >= PL061_GPIO_NR)
 		return -EINVAL;
 
-	if ((trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) &&
-	    (trigger & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)))
-	{
+	if ((trigger & IRQ_TYPE_LEVEL_MASK) && (trigger & IRQ_TYPE_EDGE_BOTH)) {
 		dev_err(gc->parent,
 			"trying to configure line %d for both level and edge "
 			"detection, choose one!\n",
@@ -185,7 +183,7 @@ static int pl061_irq_type(struct irq_data *d, unsigned trigger)
 	regmap_read(pl061->regmap, GPIOIS, &gpiois);
 	regmap_read(pl061->regmap, GPIOIBE, &gpioibe);
 
-	if (trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+	if (trigger & IRQ_TYPE_LEVEL_MASK) {
 		bool polarity = trigger & IRQ_TYPE_LEVEL_HIGH;
 
 		/* Disable edge detection */

-- 
2.34.1