[PATCH 05/24] ARM: zte: Add ZX279128S platform and CPU hotplug support

[Navid Ghahremani <ghahramani.navid@gmail.com>]

Support the dual Cortex-A9 platform, second-CPU startup through
bootloader SRAM and CPU hotplug. Keep existing ZX297520V3 support
intact.

Assisted-by: LLM
Signed-off-by: Navid Ghahremani <ghahramani.navid@gmail.com>
---
 MAINTAINERS                           |  22 ++++
 arch/arm/mach-zte/Kconfig             |  17 +++
 arch/arm/mach-zte/Makefile            |   4 +
 arch/arm/mach-zte/platsmp-zx279128s.c | 173 ++++++++++++++++++++++++++
 arch/arm/mach-zte/zx279128s.c         |  19 +++
 5 files changed, 235 insertions(+)
 create mode 100644 arch/arm/mach-zte/platsmp-zx279128s.c
 create mode 100644 arch/arm/mach-zte/zx279128s.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 4f72b4ac27..4d0f4e5485 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3894,6 +3894,28 @@ F:	drivers/video/fbdev/vt8500lcdfb.*
 F:	drivers/video/fbdev/wm8505fb*
 F:	drivers/video/fbdev/wmt_ge_rops.*
 
+ARM/ZTE ZX279128S SOC SUPPORT
+M:	Navid Ghahremani <ghahramani.navid@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/clock/zte,zx279128s-crm.yaml
+F:	Documentation/devicetree/bindings/gpio/zte,zx279128s-gpio.yaml
+F:	Documentation/devicetree/bindings/net/zte,zx279128s-gmac.yaml
+F:	Documentation/devicetree/bindings/net/zte,zx279128s-mdio.yaml
+F:	Documentation/devicetree/bindings/pci/zte,zx279128s-pcie.yaml
+F:	Documentation/devicetree/bindings/spi/zte,zx279128s-spifc.yaml
+F:	Documentation/devicetree/bindings/usb/zte,zx279128s-dwc3.yaml
+F:	arch/arm/boot/dts/zte/zx279128s*
+F:	arch/arm/mach-zte/*zx279128s*
+F:	drivers/clk/zte/clk-zx279128s.c
+F:	drivers/gpio/gpio-zx279128s.c
+F:	drivers/net/ethernet/zte/
+F:	drivers/net/mdio/mdio-zx279128s.c
+F:	drivers/net/phy/sanechips.c
+F:	drivers/pci/controller/dwc/pcie-zx279128s.c
+F:	drivers/spi/spi-zx279128s-spifc.c
+F:	include/dt-bindings/clock/zte,zx279128s-crm.h
+
 ARM/ZTE ZX29 SOC SUPPORT
 M:	Stefan Dösinger <stefandoesinger@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
diff --git a/arch/arm/mach-zte/Kconfig b/arch/arm/mach-zte/Kconfig
index d3b404ca48..ff3845f109 100644
--- a/arch/arm/mach-zte/Kconfig
+++ b/arch/arm/mach-zte/Kconfig
@@ -26,4 +26,21 @@ config SOC_ZX297520V3
 	  Please read Documentation/arch/arm/zte/zx297520v3.rst on how to boot
 	  the kernel.
 
+config SOC_ZX279128S
+	bool "zx279128s SoC"
+	default y
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GLOBAL_TIMER
+	select CACHE_L2X0
+	select CACHE_L2X0_IO_LOCK
+	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if SMP
+	help
+	  Support for the ZTE (Sanechips) zx279128s SoC, a dual-core
+	  Cortex-A9 with an L2C-310 cache controller, used in home gateways
+	  such as the ZTE ZXHN H3600. The second core is started through
+	  the on-chip SRAM, where the boot loader keeps it waiting.
+
 endif
diff --git a/arch/arm/mach-zte/Makefile b/arch/arm/mach-zte/Makefile
index 1bfe4fddd6..72f518632e 100644
--- a/arch/arm/mach-zte/Makefile
+++ b/arch/arm/mach-zte/Makefile
@@ -1,2 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_SOC_ZX297520V3) += zx297520v3.o
+obj-$(CONFIG_SOC_ZX279128S) += zx279128s.o
+ifdef CONFIG_SMP
+obj-$(CONFIG_SOC_ZX279128S) += platsmp-zx279128s.o
+endif
diff --git a/arch/arm/mach-zte/platsmp-zx279128s.c b/arch/arm/mach-zte/platsmp-zx279128s.c
new file mode 100644
index 0000000000..8285b8fb10
--- /dev/null
+++ b/arch/arm/mach-zte/platsmp-zx279128s.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026 Navid Ghahremani <ghahramani.navid@gmail.com>
+ *
+ * The boot loader runs from on-chip SRAM.  Its reset code sends every
+ * core but CPU0 into a loop: wait for an event (WFE), then jump to the
+ * start of the SRAM, where the boot loader's reset vector leads back to
+ * the WFE.  To start the second core, replace that vector with a jump to
+ * secondary_startup and send an event.
+ *
+ * To take the second core offline again (CPU hotplug, and kexec, which needs
+ * it), the core puts the boot loader's vector back and returns to the boot
+ * loader's loop with the MMU and caches off. That loop is outside the
+ * kernel's memory, so the core survives the kernel being replaced, and the
+ * next start works the same way as the first.
+ */
+
+#include <linux/cacheflush.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/smp.h>
+
+#include <asm/cp15.h>
+#include <asm/idmap.h>
+#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/tlbflush.h>
+
+/* ldr pc, [pc, #-4]: jump to the address stored in the next word */
+#define ZX279128S_JUMP_INSN	0xe51ff004
+
+static void __iomem *zx279128s_smp_sram;
+static phys_addr_t zx279128s_smp_sram_phys;
+/* the boot loader's vector, as found at boot */
+static u32 zx279128s_boot_vector[2];
+
+static int zx279128s_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	if (!zx279128s_smp_sram)
+		return -ENODEV;
+
+	/*
+	 * Store the address before the instruction: a core that wakes up
+	 * in between still runs the boot loader's vector and goes back to
+	 * sleep instead of jumping to a stale address.
+	 */
+	writel(__pa_symbol(secondary_startup), zx279128s_smp_sram + 4);
+	writel(ZX279128S_JUMP_INSN, zx279128s_smp_sram);
+
+	/* Complete both writes, then wake the core */
+	dsb_sev();
+
+	return 0;
+}
+
+static void __init zx279128s_smp_prepare_cpus(unsigned int max_cpus)
+{
+	struct device_node *np;
+	struct resource res;
+	void __iomem *scu;
+
+	np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+	if (!np) {
+		pr_err("zx279128s: no SCU node\n");
+		return;
+	}
+	scu = of_iomap(np, 0);
+	of_node_put(np);
+	if (!scu) {
+		pr_err("zx279128s: cannot map the SCU\n");
+		return;
+	}
+	scu_enable(scu);
+	iounmap(scu);
+
+	np = of_find_compatible_node(NULL, NULL, "zte,zx279128s-smp-sram");
+	if (!np) {
+		pr_err("zx279128s: no SMP SRAM node\n");
+		return;
+	}
+	if (of_address_to_resource(np, 0, &res)) {
+		of_node_put(np);
+		pr_err("zx279128s: no SMP SRAM address\n");
+		return;
+	}
+	zx279128s_smp_sram = of_iomap(np, 0);
+	of_node_put(np);
+	if (!zx279128s_smp_sram) {
+		pr_err("zx279128s: cannot map the SMP SRAM\n");
+		return;
+	}
+	zx279128s_smp_sram_phys = res.start;
+	zx279128s_boot_vector[0] = readl(zx279128s_smp_sram);
+	zx279128s_boot_vector[1] = readl(zx279128s_smp_sram + 4);
+
+	/* zx279128s_cpu_die() reads these with its data cache off */
+	sync_cache_w(&zx279128s_smp_sram);
+	sync_cache_w(&zx279128s_smp_sram_phys);
+	sync_cache_w(&zx279128s_boot_vector);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+typedef void (*phys_reset_t)(unsigned long addr, bool hvc);
+
+/*
+ * If the vector already holds a jump, an earlier kernel started the core
+ * and did not put the boot loader's vector back: the original is unknown,
+ * so the core cannot be parked safely.
+ */
+static bool zx279128s_cpu_can_disable(unsigned int cpu)
+{
+	return zx279128s_smp_sram &&
+	       zx279128s_boot_vector[0] != ZX279128S_JUMP_INSN;
+}
+
+static void zx279128s_cpu_die(unsigned int cpu)
+{
+	phys_reset_t phys_reset;
+
+	/* Take out a flat mapping, which keeps the kernel mappings too */
+	setup_mm_for_reboot();
+
+	/*
+	 * The boot loader's loop executes the vector, which
+	 * zx279128s_boot_secondary() changes with data writes. Stop caching
+	 * and predicting instructions, as at power-on, so that the parked
+	 * core sees the change.
+	 */
+	set_cr(get_cr() & ~(CR_I | CR_Z));
+	__flush_icache_all();
+	local_flush_bp_all();
+
+	/* Clean the caches and leave coherency with the other core */
+	v7_exit_coherency_flush(louis);
+
+	/*
+	 * Put the boot loader's vector back, instruction word last: the core
+	 * then wakes up into the boot loader's loop, and zx279128s_cpu_kill()
+	 * sees that it is about to leave the kernel.
+	 */
+	writel_relaxed(zx279128s_boot_vector[1], zx279128s_smp_sram + 4);
+	writel_relaxed(zx279128s_boot_vector[0], zx279128s_smp_sram);
+	dsb();
+
+	/* Turn the MMU off and continue at the boot loader's vector */
+	phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset);
+	phys_reset(zx279128s_smp_sram_phys, false);
+}
+
+static int zx279128s_cpu_kill(unsigned int cpu)
+{
+	u32 val;
+
+	/* Wait until the dying core has put the vector back */
+	return !readl_poll_timeout(zx279128s_smp_sram, val,
+				   val == zx279128s_boot_vector[0], 1000,
+				   100 * USEC_PER_MSEC);
+}
+#endif
+
+static const struct smp_operations zx279128s_smp_ops __initconst = {
+	.smp_prepare_cpus	= zx279128s_smp_prepare_cpus,
+	.smp_boot_secondary	= zx279128s_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_can_disable	= zx279128s_cpu_can_disable,
+	.cpu_die		= zx279128s_cpu_die,
+	.cpu_kill		= zx279128s_cpu_kill,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(zx279128s_smp, "zte,zx279128s-smp", &zx279128s_smp_ops);
diff --git a/arch/arm/mach-zte/zx279128s.c b/arch/arm/mach-zte/zx279128s.c
new file mode 100644
index 0000000000..064c76f8ad
--- /dev/null
+++ b/arch/arm/mach-zte/zx279128s.c
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2026 Navid Ghahremani <ghahramani.navid@gmail.com>
+ */
+
+#include <asm/mach/arch.h>
+#include <linux/init.h>
+
+static const char *const zx279128s_dt_compat[] __initconst = {
+	"zte,zx279128s",
+	NULL,
+};
+
+DT_MACHINE_START(ZX279128S, "ZTE zx279128s (Device Tree)")
+	.dt_compat	= zx279128s_dt_compat,
+	/* Keep the L2 cache setup of the boot loader and the device tree */
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
+MACHINE_END
-- 
2.55.0