Devicetree
 help / color / mirror / Atom feed
From: "Arnd Bergmann" <arnd@arndb.de>
To: "Navid Ghahremani" <ghahramani.navid@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Russell King" <linux@armlinux.org.uk>,
	"Stefan Dösinger" <stefandoesinger@gmail.com>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk@kernel.org>
Subject: Re: [PATCH 02/24] ARM: l2c: Serialize device reads with cache maintenance when requested
Date: Sat, 10 Oct 2026 16:28:29 +0200	[thread overview]
Message-ID: <5e78f63b-9479-49d9-8474-fa408135f325@app.fastmail.com> (raw)
In-Reply-To: <20261010130024.177503-3-ghahramani.navid@gmail.com>

On Sat, Oct 10, 2026, at 14:59, Navid Ghahremani wrote:
> Provide the optional lock used by the tested ZX279128S workaround. Lock-
> off experiments hung the board; the proposed API remains subject to
> maintainer review.
>
> Assisted-by: LLM
> Signed-off-by: Navid Ghahremani <ghahramani.navid@gmail.com>

Hi Navid,

This seems like a very invasive change and at the same time does not
look generic enough as it requires changes to each driver behind the
PCIe bus.

Please describe how you ended up with this version, did you copy
the from the vendor BSP (where?) or did you arrive here by
trial-and-error?

This looks related to the CONFIG_OUTER_CACHE_SYNC workaround,
though I can't tell whether that means it should be connected to
that, or if the actual symptom you see may be caused by that
workaround. Do you have any more information here? Does the
problem appear both with arm,outer-sync-disable enabled and
disabled?

      Arnd

  parent reply	other threads:[~2026-10-10 14:28 UTC|newest]

Thread overview: 55+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-10 12:59 [PATCH RFC 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Navid Ghahremani
2026-10-10 12:59 ` [PATCH 01/24] dt-bindings: cache: l2c2x0: Describe ZTE device-read serialization Navid Ghahremani
2026-10-12  9:43   ` Krzysztof Kozlowski
2026-10-10 12:59 ` [PATCH 02/24] ARM: l2c: Serialize device reads with cache maintenance when requested Navid Ghahremani
2026-10-10 13:10   ` sashiko-bot
2026-10-10 14:28   ` Arnd Bergmann [this message]
2026-10-10 21:41     ` Navid Ghahremani
2026-10-11  1:02     ` Navid Ghahremani
2026-10-11 14:48       ` Arnd Bergmann
2026-10-10 12:59 ` [PATCH 03/24] wifi: mt76: Serialize MMIO reads with outer cache maintenance Navid Ghahremani
2026-10-10 12:59 ` [PATCH 04/24] dt-bindings: arm: Add ZTE ZX279128S platform descriptions Navid Ghahremani
2026-10-10 12:59 ` [PATCH 05/24] ARM: zte: Add ZX279128S platform and CPU hotplug support Navid Ghahremani
2026-10-10 14:13   ` Arnd Bergmann
2026-10-10 17:34     ` Stefan Dösinger
2026-10-10 21:26       ` Navid Ghahremani
2026-10-10 12:59 ` [PATCH 06/24] dt-bindings: clock: Add ZTE ZX279128S CRM clocks and resets Navid Ghahremani
2026-10-10 13:08   ` sashiko-bot
2026-10-11  9:13   ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 07/24] clk: zte: Add ZX279128S CRM clock and reset driver Navid Ghahremani
2026-10-10 13:15   ` sashiko-bot
2026-10-11 11:10   ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 08/24] dt-bindings: gpio: Add ZTE ZX279128S GPIO controller Navid Ghahremani
2026-10-10 12:59 ` [PATCH 09/24] gpio: Add ZTE ZX279128S GPIO driver Navid Ghahremani
2026-10-10 13:14   ` sashiko-bot
2026-10-11 11:19   ` Stefan Dösinger
2026-10-12 10:59   ` Uwe Kleine-König
2026-10-10 12:59 ` [PATCH 10/24] dt-bindings: pinctrl: pinctrl-single: Add ZTE ZX279128S pin mux Navid Ghahremani
2026-10-10 12:59 ` [PATCH 11/24] dt-bindings: mfd: syscon: Add ZX279128S system controller Navid Ghahremani
2026-10-10 13:08   ` sashiko-bot
2026-10-10 12:59 ` [PATCH 12/24] dt-bindings: PCI: Add ZTE ZX279128S host controller Navid Ghahremani
2026-10-10 13:12   ` sashiko-bot
2026-10-10 12:59 ` [PATCH 13/24] PCI: dwc: Add ZTE ZX279128S host controller driver Navid Ghahremani
2026-10-10 13:14   ` sashiko-bot
2026-10-11 13:03   ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 14/24] dt-bindings: net: Add ZTE ZX279128S MDIO controller Navid Ghahremani
2026-10-10 13:06   ` sashiko-bot
2026-10-10 12:59 ` [PATCH 15/24] net: mdio: " Navid Ghahremani
2026-10-10 13:11   ` sashiko-bot
2026-10-10 12:59 ` [PATCH 16/24] net: phy: Add Sanechips ZX5201 PHY support Navid Ghahremani
2026-10-10 12:59 ` [PATCH 17/24] dt-bindings: net: Add ZTE ZX279128S Ethernet switch Navid Ghahremani
2026-10-10 13:08   ` sashiko-bot
2026-10-10 12:59 ` [PATCH 18/24] net: ethernet: zte: Add ZX279128S Ethernet switch driver Navid Ghahremani
2026-10-10 13:19   ` sashiko-bot
2026-10-10 12:59 ` [PATCH 19/24] dt-bindings: spi: Add ZTE ZX279128S SPI flash controller Navid Ghahremani
2026-10-10 12:59 ` [PATCH 20/24] " Navid Ghahremani
2026-10-10 13:11   ` sashiko-bot
2026-10-11 16:32   ` Stefan Dösinger
2026-10-10 12:59 ` [PATCH 21/24] dt-bindings: usb: Add ZTE ZX279128S DWC3 controller Navid Ghahremani
2026-10-10 13:11   ` sashiko-bot
2026-10-10 13:00 ` [PATCH 22/24] usb: dwc3: generic-plat: Add ZTE ZX279128S Navid Ghahremani
2026-10-10 13:14   ` sashiko-bot
2026-10-10 13:00 ` [PATCH 23/24] ARM: dts: zte: Add ZX279128S SoC description Navid Ghahremani
2026-10-10 13:14   ` sashiko-bot
2026-10-10 13:00 ` [PATCH 24/24] ARM: dts: zte: Add ZTE ZXHN H3600 board Navid Ghahremani
2026-10-12 19:20 ` [PATCH RFC 00/24] ARM: zte: Add support for Sanechips ZX279128S and ZTE ZXHN H3600 Stefan Dösinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5e78f63b-9479-49d9-8474-fa408135f325@app.fastmail.com \
    --to=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=ghahramani.navid@gmail.com \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=robh@kernel.org \
    --cc=stefandoesinger@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox