From: Joshua Crofts <joshua.crofts1@gmail.com>
To: Chang Yu <marcus.yu.56@gmail.com>
Cc: "Jonathan Cameron" <jic23@kernel.org>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Shi Hao" <i.shihao.999@gmail.com>,
"Jose A. Perez de Azpillaga" <azpijr@gmail.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 1/2] dt-bindings: iio: light: add as7343
Date: Tue, 13 Oct 2026 14:36:39 +0200 [thread overview]
Message-ID: <20261013143639.000017b9@gmail.com> (raw)
In-Reply-To: <20261013115639.167433-2-marcus.yu.56@gmail.com>
On Tue, 13 Oct 2026 19:56:38 +0800
Chang Yu <marcus.yu.56@gmail.com> wrote:
> Add binding for AMS AS7343 which is a 14-channel multi-spectral sensor
> with i2c address of 0x39.
>
> The GPIO pin is not described because the datasheet does not document
> how to use it for hardware synchronization at all. The GPIO register
> also has no mode-select bit to isolate the pin from the chip's
> internal control logic. Exposing it as a generic GPIO could result
> in kernel writes being overwritten by internal logic.
>
> Datasheet: https://look.ams-osram.com/m/5f2d27fff9a874d2/original/AS7343-14-Channel-Multi-Spectral-Sensor.pdf
> Signed-off-by: Chang Yu <marcus.yu.56@gmail.com>
> ---
> Changes in v6:
> - Add a ref to leds/common.yaml for the LDR pin.
>
> Changes in v5:
> - Remove the GPIO pin.
>
> Changes in v4:
> - Fix led-max-microamp property name.
>
> Changes in v3:
> - Add missing include for gpio.
> - Expand GPIO descrption to include hardware synchronization.
> - Use led-max-microamp instead of led-current-microamp for the LDR pin.
>
> Changes in v2:
> - Add the LDR, the interrupt pin, and the GPIO pin to the bindings.
> - Fix node name and unit address mismatch.
> - Include MAINTAINERS changes.
>
> .../bindings/iio/light/ams,as7343.yaml | 66 +++++++++++++++++++
> MAINTAINERS | 6 ++
> 2 files changed, 72 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/light/ams,as7343.yaml b/Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
> new file mode 100644
> index 000000000000..7fb10b0d4843
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/light/ams,as7343.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/light/ams,as7343.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: AMS AS7343 14-Channel Multi-Spectral Sensor
> +
> +maintainers:
> + - Chang Yu <marcus.yu.56@gmail.com>
> +
> +description: |
> + The AMS AS7343 is a 14-channel multi-spectral sensor with i2c address of 0x39.
> + https://look.ams-osram.com/m/5f2d27fff9a874d2/original/AS7343-14-Channel-Multi-Spectral-Sensor.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - ams,as7343
> +
> + reg:
> + description:
> + I2C address of the device (0x39).
> + maxItems: 1
> +
> + interrupts:
> + description:
> + Open drain output active low interrupt pin.
> + maxItems: 1
> +
> + vdd-supply: true
> +
> + led-max-microamp:
> + description:
> + The driver current for the external LED connected to the LDR pin.
> + minimum: 4000
> + maximum: 258000
> + multipleOf: 2000
> + default: 12000
> +
> +required:
> + - compatible
> + - reg
> + - vdd-supply
> +
> +additionalProperties: false
Should be unevaluatedProperties as you're using $refs in the binding,
but Jonathan could tweak that when applying.
--
Kind regards,
Joshua Crofts
next prev parent reply other threads:[~2026-10-13 12:36 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-13 11:56 [PATCH v6 0/2] Add support for AS7343 multi-spectral sensor Chang Yu
2026-10-13 11:56 ` [PATCH v6 1/2] dt-bindings: iio: light: add as7343 Chang Yu
2026-10-13 12:04 ` sashiko-bot
2026-10-13 12:36 ` Joshua Crofts [this message]
2026-10-13 15:15 ` Chang Yu
2026-10-13 11:56 ` [PATCH v6 2/2] iio: light: add AS7343 multi-spectral sensor driver Chang Yu
2026-10-13 12:35 ` Joshua Crofts
2026-10-13 16:28 ` Andy Shevchenko
2026-10-13 16:27 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261013143639.000017b9@gmail.com \
--to=joshua.crofts1@gmail.com \
--cc=andy@kernel.org \
--cc=azpijr@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=i.shihao.999@gmail.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcus.yu.56@gmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox