* [PATCH 0/3] arm64: dts: qcom: sm8350: Add CCI and camera MCLK pins
@ 2026-11-04 23:05 Vladimir Zapolskiy
2026-11-04 23:05 ` [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible Vladimir Zapolskiy
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Vladimir Zapolskiy @ 2026-11-04 23:05 UTC (permalink / raw)
To: Loic Poulain, Robert Foss, Rob Herring, Krzysztof Kozlowski,
Bjorn Andersson, Konrad Dybcio, Abel Vesa
Cc: Andi Shyti, Conor Dooley, linux-i2c, linux-arm-msm, devicetree
Add Qualcomm SM8350 Camera Control Interface (CCI) controllers and the
pin configurations of camera sensor master clock outputs.
The series depends on the SM8350 camera clock controller support:
https://lore.kernel.org/all/20261104001704.2744766-1-vz@kernel.org/
Vladimir Zapolskiy (3):
dt-bindings: i2c: qcom-cci: Document SM8350 compatible
arm64: dts: qcom: sm8350: Add CCI device tree nodes
arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
arch/arm64/boot/dts/qcom/sm8350.dtsi | 231 ++++++++++++++++++
2 files changed, 233 insertions(+)
--
2.51.0
^ permalink raw reply [flat|nested] 7+ messages in thread* [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible 2026-11-04 23:05 [PATCH 0/3] arm64: dts: qcom: sm8350: Add CCI and camera MCLK pins Vladimir Zapolskiy @ 2026-11-04 23:05 ` Vladimir Zapolskiy 2026-11-05 8:38 ` Loic Poulain 2026-11-04 23:05 ` [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes Vladimir Zapolskiy 2026-11-04 23:05 ` [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states Vladimir Zapolskiy 2 siblings, 1 reply; 7+ messages in thread From: Vladimir Zapolskiy @ 2026-11-04 23:05 UTC (permalink / raw) To: Loic Poulain, Robert Foss, Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Abel Vesa Cc: Andi Shyti, Conor Dooley, linux-i2c, linux-arm-msm, devicetree Add Qualcomm SM8350 SoC compatible to the CCI device tree bindings, SM8350 CCI is compatible with CCI v2 found on MSM8996. Signed-off-by: Vladimir Zapolskiy <vz@kernel.org> --- Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml index 1e8def25ec0e..63083e0bdd9c 100644 --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml @@ -40,6 +40,7 @@ properties: - qcom,sm6150-cci - qcom,sm6350-cci - qcom,sm8250-cci + - qcom,sm8350-cci - qcom,sm8450-cci - qcom,sm8550-cci - qcom,sm8650-cci @@ -219,6 +220,7 @@ allOf: enum: - qcom,sc7280-cci - qcom,sm8250-cci + - qcom,sm8350-cci - qcom,sm8450-cci then: properties: -- 2.51.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible 2026-11-04 23:05 ` [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible Vladimir Zapolskiy @ 2026-11-05 8:38 ` Loic Poulain 0 siblings, 0 replies; 7+ messages in thread From: Loic Poulain @ 2026-11-05 8:38 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Robert Foss, Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Abel Vesa, Andi Shyti, Conor Dooley, linux-i2c, linux-arm-msm, devicetree On Thu, Nov 5, 2026 at 12:05 AM Vladimir Zapolskiy <vz@kernel.org> wrote: > > Add Qualcomm SM8350 SoC compatible to the CCI device tree bindings, > SM8350 CCI is compatible with CCI v2 found on MSM8996. > > Signed-off-by: Vladimir Zapolskiy <vz@kernel.org> Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com> > --- > Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml > index 1e8def25ec0e..63083e0bdd9c 100644 > --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml > +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-cci.yaml > @@ -40,6 +40,7 @@ properties: > - qcom,sm6150-cci > - qcom,sm6350-cci > - qcom,sm8250-cci > + - qcom,sm8350-cci > - qcom,sm8450-cci > - qcom,sm8550-cci > - qcom,sm8650-cci > @@ -219,6 +220,7 @@ allOf: > enum: > - qcom,sc7280-cci > - qcom,sm8250-cci > + - qcom,sm8350-cci > - qcom,sm8450-cci > then: > properties: > -- > 2.51.0 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes 2026-11-04 23:05 [PATCH 0/3] arm64: dts: qcom: sm8350: Add CCI and camera MCLK pins Vladimir Zapolskiy 2026-11-04 23:05 ` [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible Vladimir Zapolskiy @ 2026-11-04 23:05 ` Vladimir Zapolskiy 2026-11-05 8:37 ` Loic Poulain 2026-11-04 23:05 ` [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states Vladimir Zapolskiy 2 siblings, 1 reply; 7+ messages in thread From: Vladimir Zapolskiy @ 2026-11-04 23:05 UTC (permalink / raw) To: Loic Poulain, Robert Foss, Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Abel Vesa Cc: Andi Shyti, Conor Dooley, linux-i2c, linux-arm-msm, devicetree Add Camera Control Interface (CCI) controller device tree nodes and pin configurations of the I2C busses to SM8350 SoC dtsi. Signed-off-by: Vladimir Zapolskiy <vz@kernel.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 147 +++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index a51942c99f8a..41dff3736061 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -10,6 +10,7 @@ #include <dt-bindings/clock/qcom,gcc-sm8350.h> #include <dt-bindings/clock/qcom,gpucc-sm8350.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/clock/qcom,sm8350-camcc.h> #include <dt-bindings/clock/qcom,sm8350-videocc.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/firmware/qcom,scm.h> @@ -2830,6 +2831,88 @@ videocc: clock-controller@abf0000 { #power-domain-cells = <1>; }; + cci0: cci@ac4f000 { + compatible = "qcom,sm8350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac4f000 0 0x1000>; + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_0_CLK>, + <&camcc CAM_CC_CCI_0_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci0_0_default &cci0_1_default>; + pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci0_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci0_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + cci1: cci@ac50000 { + compatible = "qcom,sm8350-cci", "qcom,msm8996-cci"; + reg = <0 0x0ac50000 0 0x1000>; + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; + power-domains = <&camcc TITAN_TOP_GDSC>; + + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&camcc CAM_CC_CPAS_AHB_CLK>, + <&camcc CAM_CC_CCI_1_CLK>, + <&camcc CAM_CC_CCI_1_CLK_SRC>; + clock-names = "camnoc_axi", + "slow_ahb_src", + "cpas_ahb", + "cci", + "cci_src"; + + pinctrl-0 = <&cci1_0_default &cci1_1_default>; + pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>; + pinctrl-names = "default", "sleep"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + cci1_i2c0: i2c-bus@0 { + reg = <0>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cci1_i2c1: i2c-bus@1 { + reg = <1>; + clock-frequency = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + camcc: clock-controller@ad00000 { compatible = "qcom,sm8350-camcc"; reg = <0 0x0ad00000 0 0x10000>; @@ -3348,6 +3431,70 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 204>; wakeup-parent = <&pdc>; + cci0_0_default: cci0-0-default-state { + /* SDA, SCL */ + pins = "gpio107", "gpio108"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_0_sleep: cci0-0-sleep-state { + /* SDA, SCL */ + pins = "gpio107", "gpio108"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci0_1_default: cci0-1-default-state { + /* SDA, SCL */ + pins = "gpio109", "gpio110"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci0_1_sleep: cci0-1-sleep-state { + /* SDA, SCL */ + pins = "gpio109", "gpio110"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_0_default: cci1-0-default-state { + /* SDA, SCL */ + pins = "gpio111", "gpio112"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_0_sleep: cci1-0-sleep-state { + /* SDA, SCL */ + pins = "gpio111", "gpio112"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + + cci1_1_default: cci1-1-default-state { + /* SDA, SCL */ + pins = "gpio113", "gpio114"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-up; + }; + + cci1_1_sleep: cci1-1-sleep-state { + /* SDA, SCL */ + pins = "gpio113", "gpio114"; + function = "cci_i2c"; + drive-strength = <2>; + bias-pull-down; + }; + sdc2_default_state: sdc2-default-state { clk-pins { pins = "sdc2_clk"; -- 2.51.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes 2026-11-04 23:05 ` [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes Vladimir Zapolskiy @ 2026-11-05 8:37 ` Loic Poulain 0 siblings, 0 replies; 7+ messages in thread From: Loic Poulain @ 2026-11-05 8:37 UTC (permalink / raw) To: Vladimir Zapolskiy Cc: Robert Foss, Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Abel Vesa, Andi Shyti, Conor Dooley, linux-i2c, linux-arm-msm, devicetree On Thu, Nov 5, 2026 at 12:05 AM Vladimir Zapolskiy <vz@kernel.org> wrote: > > Add Camera Control Interface (CCI) controller device tree nodes and pin > configurations of the I2C busses to SM8350 SoC dtsi. > > Signed-off-by: Vladimir Zapolskiy <vz@kernel.org> > --- > arch/arm64/boot/dts/qcom/sm8350.dtsi | 147 +++++++++++++++++++++++++++ > 1 file changed, 147 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi > index a51942c99f8a..41dff3736061 100644 > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi > @@ -10,6 +10,7 @@ > #include <dt-bindings/clock/qcom,gcc-sm8350.h> > #include <dt-bindings/clock/qcom,gpucc-sm8350.h> > #include <dt-bindings/clock/qcom,rpmh.h> > +#include <dt-bindings/clock/qcom,sm8350-camcc.h> > #include <dt-bindings/clock/qcom,sm8350-videocc.h> > #include <dt-bindings/dma/qcom-gpi.h> > #include <dt-bindings/firmware/qcom,scm.h> > @@ -2830,6 +2831,88 @@ videocc: clock-controller@abf0000 { > #power-domain-cells = <1>; > }; > > + cci0: cci@ac4f000 { > + compatible = "qcom,sm8350-cci", "qcom,msm8996-cci"; > + reg = <0 0x0ac4f000 0 0x1000>; > + interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>; > + power-domains = <&camcc TITAN_TOP_GDSC>; > + > + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, > + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, > + <&camcc CAM_CC_CPAS_AHB_CLK>, > + <&camcc CAM_CC_CCI_0_CLK>, > + <&camcc CAM_CC_CCI_0_CLK_SRC>; > + clock-names = "camnoc_axi", > + "slow_ahb_src", > + "cpas_ahb", > + "cci", > + "cci_src"; > + > + pinctrl-0 = <&cci0_0_default &cci0_1_default>; > + pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>; > + pinctrl-names = "default", "sleep"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + status = "disabled"; > + > + cci0_i2c0: i2c-bus@0 { > + reg = <0>; > + clock-frequency = <1000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + cci0_i2c1: i2c-bus@1 { > + reg = <1>; > + clock-frequency = <1000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > + > + cci1: cci@ac50000 { > + compatible = "qcom,sm8350-cci", "qcom,msm8996-cci"; > + reg = <0 0x0ac50000 0 0x1000>; > + interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>; > + power-domains = <&camcc TITAN_TOP_GDSC>; > + > + clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>, > + <&camcc CAM_CC_SLOW_AHB_CLK_SRC>, > + <&camcc CAM_CC_CPAS_AHB_CLK>, > + <&camcc CAM_CC_CCI_1_CLK>, > + <&camcc CAM_CC_CCI_1_CLK_SRC>; > + clock-names = "camnoc_axi", > + "slow_ahb_src", > + "cpas_ahb", > + "cci", > + "cci_src"; > + > + pinctrl-0 = <&cci1_0_default &cci1_1_default>; > + pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>; > + pinctrl-names = "default", "sleep"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + status = "disabled"; > + > + cci1_i2c0: i2c-bus@0 { > + reg = <0>; > + clock-frequency = <1000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + cci1_i2c1: i2c-bus@1 { > + reg = <1>; > + clock-frequency = <1000000>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > + > camcc: clock-controller@ad00000 { > compatible = "qcom,sm8350-camcc"; > reg = <0 0x0ad00000 0 0x10000>; > @@ -3348,6 +3431,70 @@ tlmm: pinctrl@f100000 { > gpio-ranges = <&tlmm 0 0 204>; > wakeup-parent = <&pdc>; > > + cci0_0_default: cci0-0-default-state { > + /* SDA, SCL */ > + pins = "gpio107", "gpio108"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-up; I had similar comments on a different platform, but why pull-up here (for SCL/SDA)? Do we expect boards to lack the external pull-ups required by I2C? If not, enabling the internal pull-ups seems unnecessary. Also, what is their effective resistance on these platforms? Aren't they typically too weak to meet the rise-time requirements of most I2C modes anyway? > + }; > + > + cci0_0_sleep: cci0-0-sleep-state { > + /* SDA, SCL */ > + pins = "gpio107", "gpio108"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + cci0_1_default: cci0-1-default-state { > + /* SDA, SCL */ > + pins = "gpio109", "gpio110"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + cci0_1_sleep: cci0-1-sleep-state { > + /* SDA, SCL */ > + pins = "gpio109", "gpio110"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + cci1_0_default: cci1-0-default-state { > + /* SDA, SCL */ > + pins = "gpio111", "gpio112"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + cci1_0_sleep: cci1-0-sleep-state { > + /* SDA, SCL */ > + pins = "gpio111", "gpio112"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > + cci1_1_default: cci1-1-default-state { > + /* SDA, SCL */ > + pins = "gpio113", "gpio114"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + cci1_1_sleep: cci1-1-sleep-state { > + /* SDA, SCL */ > + pins = "gpio113", "gpio114"; > + function = "cci_i2c"; > + drive-strength = <2>; > + bias-pull-down; > + }; > + > sdc2_default_state: sdc2-default-state { > clk-pins { > pins = "sdc2_clk"; > -- > 2.51.0 > ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states 2026-11-04 23:05 [PATCH 0/3] arm64: dts: qcom: sm8350: Add CCI and camera MCLK pins Vladimir Zapolskiy 2026-11-04 23:05 ` [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible Vladimir Zapolskiy 2026-11-04 23:05 ` [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes Vladimir Zapolskiy @ 2026-11-04 23:05 ` Vladimir Zapolskiy 2026-11-05 8:56 ` Konrad Dybcio 2 siblings, 1 reply; 7+ messages in thread From: Vladimir Zapolskiy @ 2026-11-04 23:05 UTC (permalink / raw) To: Loic Poulain, Robert Foss, Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Abel Vesa Cc: Andi Shyti, Conor Dooley, linux-i2c, linux-arm-msm, devicetree Add pinctrl states of six camera sensor MCLK output pins found on Qualcomm SM8350 SoC. Signed-off-by: Vladimir Zapolskiy <vz@kernel.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 84 ++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 41dff3736061..437ceaa28fbd 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -3431,6 +3431,90 @@ tlmm: pinctrl@f100000 { gpio-ranges = <&tlmm 0 0 204>; wakeup-parent = <&pdc>; + cam_mclk0_default: cam-mclk0-default-state { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk0_sleep: cam-mclk0-sleep-state { + pins = "gpio100"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk1_default: cam-mclk1-default-state { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk1_sleep: cam-mclk1-sleep-state { + pins = "gpio101"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk2_default: cam-mclk2-default-state { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk2_sleep: cam-mclk2-sleep-state { + pins = "gpio102"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk3_default: cam-mclk3-default-state { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk3_sleep: cam-mclk3-sleep-state { + pins = "gpio103"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk4_default: cam-mclk4-default-state { + pins = "gpio104"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk4_sleep: cam-mclk4-sleep-state { + pins = "gpio104"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + + cam_mclk5_default: cam-mclk5-default-state { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cam_mclk5_sleep: cam-mclk5-sleep-state { + pins = "gpio105"; + function = "cam_mclk"; + drive-strength = <2>; + bias-pull-down; + }; + cci0_0_default: cci0-0-default-state { /* SDA, SCL */ pins = "gpio107", "gpio108"; -- 2.51.0 ^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states 2026-11-04 23:05 ` [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states Vladimir Zapolskiy @ 2026-11-05 8:56 ` Konrad Dybcio 0 siblings, 0 replies; 7+ messages in thread From: Konrad Dybcio @ 2026-11-05 8:56 UTC (permalink / raw) To: Vladimir Zapolskiy, Loic Poulain, Robert Foss, Rob Herring, Krzysztof Kozlowski, Bjorn Andersson, Konrad Dybcio, Abel Vesa Cc: Andi Shyti, Conor Dooley, linux-i2c, linux-arm-msm, devicetree On 11/5/26 12:05 AM, Vladimir Zapolskiy wrote: > Add pinctrl states of six camera sensor MCLK output pins found on > Qualcomm SM8350 SoC. > > Signed-off-by: Vladimir Zapolskiy <vz@kernel.org> > --- Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Konrad ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2026-11-05 8:56 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2026-11-04 23:05 [PATCH 0/3] arm64: dts: qcom: sm8350: Add CCI and camera MCLK pins Vladimir Zapolskiy 2026-11-04 23:05 ` [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible Vladimir Zapolskiy 2026-11-05 8:38 ` Loic Poulain 2026-11-04 23:05 ` [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes Vladimir Zapolskiy 2026-11-05 8:37 ` Loic Poulain 2026-11-04 23:05 ` [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states Vladimir Zapolskiy 2026-11-05 8:56 ` Konrad Dybcio
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox