Re: [PATCH 3/5] iio: adc: qcom-spmi-adc5: Add ADC5_BAT_THERM_100K_PU

[Jonathan Cameron <jic23@kernel.org>]

On Thu, 12 Nov 2026 14:07:29 -0300
Val Packett <val@packett.cool> wrote:

> Even though it existed in bindings for the longest time,
> ADC5_BAT_THERM_100K_PU was never assigned in the driver. Do so.
> 
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index d57ba8526e0c..c27ff89429f5 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -542,6 +542,8 @@ static const struct adc5_channels adc5_chans_pmic[ADC5_MAX_CHANNEL] = {
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_XO_THERM_100K_PU]	= ADC5_CHAN_TEMP("xo_therm", 0,
>  					SCALE_HW_CALIB_XOTHERM)
> +	[ADC5_BAT_THERM_100K_PU]	= ADC5_CHAN_TEMP("bat_therm", 0,
> +					SCALE_HW_CALIB_THERM_100K_PULLUP)
Whilst alignment isn't exactly consistent, this should probably match
the one two down that has same number of chars in the _PU] bit.
So use a space rather than a tab.

Otherwise seems fine to me.

>  	[ADC5_BAT_ID_100K_PU]	= ADC5_CHAN_TEMP("bat_id", 0,
>  					SCALE_HW_CALIB_DEFAULT)
>  	[ADC5_AMUX_THM1_100K_PU] = ADC5_CHAN_TEMP("amux_thm1_100k_pu", 0,