Devicetree
 help / color / mirror / Atom feed
From: Abdur Rofik <rofikcoga@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, phone-devel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Ivon Argel <ivonargel13@gmail.com>,
	Abdur Rofik <rofikcoga@gmail.com>
Subject: [PATCH v2 00/10] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support
Date: Wed, 18 Nov 2026 13:07:04 +0100	[thread overview]
Message-ID: <20261118120714.31505-1-rofikcoga@gmail.com> (raw)

This series adds initial mainline device tree and driver support for the
Qualcomm SM8250-based LG V60 ThinQ 5G (timelm / LM-V600) smartphone.

Hardware features supported in this stage:
- Base board devicetree (sm8250-lg-timelm.dts)
- PM8150, PM8150B, PM8150L, and PM8009 PMICs and regulators
- UFS 3.0 storage and MicroSD card slot
- GPIO keys (Volume Down, Google Assistant) and PON keys (Power, Volume Up)
- Simple framebuffer (continuous splash handed off from bootloader)
- Adreno 650 GPU with GMU and zap shader
- LG SW43103 1080x2460 DSI command mode AMOLED panel with DSC
- Silicon Works SW42902 I2C touchscreen controller
- PM8150B USB Type-C controller in sink mode with USB-PD and
  orientation switch
- QCA6390 Bluetooth HCI controller on UART6

Changes in v2:
- General / DCO & Identity:
  - Replaced account handle "rofikkerneldev" with real name
    "Abdur Rofik <rofikcoga@gmail.com>" across all commit authors,
    Signed-off-by trailers, MAINTAINERS entries, and copyright headers
    per Documentation/process/submitting-patches.rst.
  - Replaced un-documented "lge" vendor prefix with documented "lg"
    prefix across devicetree bindings, compatible strings, and dts files.
- Devicetree bindings:
  - Added lg,timelm compatible in arm/qcom.yaml.
  - Added lg,sw43103 panel binding with enable-gpios and
    vddi/vpnl supplies.
  - Added lg,sw42902 touchscreen binding with vcl-supply and
    vdd-supply.
- Device Tree (arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts):
  - Renamed file to sm8250-lg-timelm.dts matching vendor prefix.
  - Reserved memory: folded cont_splash_mem and log regions into base dts;
    sorted all nodes by ascending unit-address.
  - Ramoops: adjusted size allocations (record-size 0x40000, pmsg-size
    0x1c0000) ensuring 256KB is available for dmesg panic dumps.
  - Regulators: dropped unused LDO4 from PM8009 regulators-2 node,
    resolving the invalid 1.05V constraint failure.
  - USB QMP PHY: corrected swapped supplies (vdda-phy to 0.9V l18a_0p9,
    vdda-pll to 1.2V l9a_1p2).
  - GPU: enabled &gmu alongside &gpu to ensure MSM DRM component
    binding succeeds without -ENODEV in a6xx_gmu_init().
  - SDHC: added complete pinctrl states (sdc2_default_state,
    sdc2_sleep_state, sdc2_card_det_n) to &sdhc_2.
  - UFS: added regulator-allow-set-load and regulator-allowed-modes for
    dynamic load scaling.
  - Panel: added enable-gpios to panel@0 node; sorted display nodes
    alphabetically.
  - Touchscreen: used fixed regulators reg_ts_vcl and reg_ts_vdd for
    power supplies instead of raw GPIO toggles.
  - USB Type-C: replaced PDO_BATT with PDO_VAR(5000, 9000, 3000) to
    ensure valid 9V/3A PD sink requests without clamping to 600mA;
    added OF graph ports connecting DWC3 HS and SuperSpeed QMP PHY
    orientation switch.
  - Bluetooth: corrected QCA6390 PMU voltages by setting smps6 (0.95V)
    and smps8 (1.35V) constraints.
  - Cleaned up unused dt-bindings headers and enforced strict
    alphabetical ordering of all referenced label nodes.
- Panel driver (drivers/gpu/drm/panel/panel-lg-sw43103.c):
  - Removed redundant manual unprepare call in sw43103_remove().
  - Guarded sw43103_backlight_update_status() against execution when
    unprepared, avoiding unsynchronized DSI DCS writes.
  - Removed hardcoded full brightness writes in sw43103_enable().
  - Expanded Kconfig help paragraph to 4 lines.
- Touchscreen driver (drivers/input/touchscreen/sw42902.c):
  - Converted GPIO power controls to standard regulator bulk supplies
    (vcl and vdd).
  - Added suspended flag guarding resume and I2C operations to prevent
    IRQ disable imbalance on resume error.
  - Pre-scanned for palm touch reports before queueing MT slots.
  - Used named initializer in struct i2c_device_id table.
  - Followed input subsystem error naming conventions.
- MAINTAINERS:
  - Added entries for LG V60 ThinQ 5G, LG SW43103 panel driver, and
    Silicon Works SW42902 touchscreen driver in strict alphabetical
    order.

Abdur Rofik (10):
  dt-bindings: arm: qcom: add LG V60 ThinQ 5G (timelm)
  arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support
  dt-bindings: display: panel: add LG SW43103
  drm/panel: add LG SW43103 panel driver
  dt-bindings: input: touchscreen: add Silicon Works SW42902
  Input: touchscreen: add Silicon Works SW42902 support
  arm64: dts: qcom: sm8250-lg-timelm: enable SW43103 panel
  arm64: dts: qcom: sm8250-lg-timelm: add SW42902 touchscreen
  arm64: dts: qcom: sm8250-lg-timelm: enable USB Type-C
  arm64: dts: qcom: sm8250-lg-timelm: add QCA6390 Bluetooth

 .../devicetree/bindings/arm/qcom.yaml         |   1 +
 .../bindings/display/panel/lg,sw43103.yaml    |  69 ++
 .../input/touchscreen/lg,sw42902.yaml         |  73 ++
 MAINTAINERS                                   |  19 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts | 840 ++++++++++++++++++
 drivers/gpu/drm/panel/Kconfig                 |  13 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-lg-sw43103.c      | 587 ++++++++++++
 drivers/input/touchscreen/Kconfig             |  13 +
 drivers/input/touchscreen/Makefile            |   1 +
 drivers/input/touchscreen/sw42902.c           | 355 ++++++++
 12 files changed, 1973 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/lg,sw43103.yaml
 create mode 100644 Documentation/devicetree/bindings/input/touchscreen/lg,sw42902.yaml
 create mode 100644 arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
 create mode 100644 drivers/gpu/drm/panel/panel-lg-sw43103.c
 create mode 100644 drivers/input/touchscreen/sw42902.c

-- 
2.39.5


             reply	other threads:[~2026-11-18 12:07 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18 12:07 Abdur Rofik [this message]
2026-11-18 12:07 ` [PATCH v2 01/10] dt-bindings: arm: qcom: add LG V60 ThinQ 5G (timelm) Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 02/10] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 03/10] dt-bindings: display: panel: add LG SW43103 Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 04/10] drm/panel: add LG SW43103 panel driver Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 05/10] dt-bindings: input: touchscreen: add Silicon Works SW42902 Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 06/10] Input: touchscreen: add Silicon Works SW42902 support Abdur Rofik
2026-11-18 12:17   ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 07/10] arm64: dts: qcom: sm8250-lg-timelm: enable SW43103 panel Abdur Rofik
2026-11-18 12:26   ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 08/10] arm64: dts: qcom: sm8250-lg-timelm: add SW42902 touchscreen Abdur Rofik
2026-11-18 12:27   ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 09/10] arm64: dts: qcom: sm8250-lg-timelm: enable USB Type-C Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 10/10] arm64: dts: qcom: sm8250-lg-timelm: add QCA6390 Bluetooth Abdur Rofik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118120714.31505-1-rofikcoga@gmail.com \
    --to=rofikcoga@gmail.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=ivonargel13@gmail.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox