Devicetree
 help / color / mirror / Atom feed
From: Abdur Rofik <rofikcoga@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: devicetree@vger.kernel.org, phone-devel@vger.kernel.org,
	dri-devel@lists.freedesktop.org, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Ivon Argel <ivonargel13@gmail.com>,
	Abdur Rofik <rofikcoga@gmail.com>
Subject: [PATCH v2 10/10] arm64: dts: qcom: sm8250-lg-timelm: add QCA6390 Bluetooth
Date: Wed, 18 Nov 2026 13:07:14 +0100	[thread overview]
Message-ID: <20261118120714.31505-11-rofikcoga@gmail.com> (raw)
In-Reply-To: <20261118120714.31505-1-rofikcoga@gmail.com>

Describe the QCA6390 power sequencer with properly voltaged supplies
and enable Bluetooth HCI on GENI UART6.

Signed-off-by: Abdur Rofik <rofikcoga@gmail.com>
---
 arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts | 92 +++++++++++++++++++
 1 file changed, 92 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
index 12ca5ea921fff..3356099696a5e 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-lg-timelm.dts
@@ -67,6 +67,67 @@ key-assistant {
 		};
 	};
 
+	qca6390-pmu {
+		compatible = "qcom,qca6390-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+
+		vddaon-supply = <&vreg_s6a_0p95>;
+		vddpmu-supply = <&vreg_s6a_0p95>;
+		vddrfa0p95-supply = <&vreg_s6a_0p95>;
+		vddrfa1p3-supply = <&vreg_s8c_1p35>;
+		vddrfa1p9-supply = <&vreg_s5a_1p9>;
+		vddpcie1p3-supply = <&vreg_s8c_1p35>;
+		vddpcie1p9-supply = <&vreg_s5a_1p9>;
+		vddio-supply = <&vreg_s4a_1p8>;
+
+		wlan-enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+
 	reserved-memory {
 		res_xbl_uefi_log_region: memory@80880000 {
 			reg = <0x0 0x80880000 0x0 0x14000>;
@@ -639,6 +700,14 @@ &sdhc_2 {
 &tlmm {
 	gpio-reserved-ranges = <40 4>, <52 4>;
 
+	bt_en_state: bt-enable-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	sdc2_default_state: sdc2-default-state {
 		clk-pins {
 			pins = "sdc2_clk";
@@ -692,6 +761,29 @@ ts_int_default: ts-int-default-state {
 		drive-strength = <8>;
 		bias-pull-up;
 	};
+
+	wlan_en_state: wlan-enable-state {
+		pins = "gpio20";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-pull-up;
+		output-low;
+	};
+};
+
+&uart6 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,qca6390-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+	};
 };
 
 &uart12 {
-- 
2.39.5


      parent reply	other threads:[~2026-11-18 12:07 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-18 12:07 [PATCH v2 00/10] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 01/10] dt-bindings: arm: qcom: add LG V60 ThinQ 5G (timelm) Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 02/10] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 03/10] dt-bindings: display: panel: add LG SW43103 Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 04/10] drm/panel: add LG SW43103 panel driver Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 05/10] dt-bindings: input: touchscreen: add Silicon Works SW42902 Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 06/10] Input: touchscreen: add Silicon Works SW42902 support Abdur Rofik
2026-11-18 12:17   ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 07/10] arm64: dts: qcom: sm8250-lg-timelm: enable SW43103 panel Abdur Rofik
2026-11-18 12:26   ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 08/10] arm64: dts: qcom: sm8250-lg-timelm: add SW42902 touchscreen Abdur Rofik
2026-11-18 12:27   ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 09/10] arm64: dts: qcom: sm8250-lg-timelm: enable USB Type-C Abdur Rofik
2026-11-18 12:07 ` Abdur Rofik [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261118120714.31505-11-rofikcoga@gmail.com \
    --to=rofikcoga@gmail.com \
    --cc=andersson@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=ivonargel13@gmail.com \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox