From: sashiko-bot@kernel.org
To: "Abdur Rofik" <rofikcoga@gmail.com>
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-input@vger.kernel.org, robh@kernel.org,
conor+dt@kernel.org, dmitry.torokhov@gmail.com
Subject: Re: [PATCH v2 06/10] Input: touchscreen: add Silicon Works SW42902 support
Date: Wed, 18 Nov 2026 12:17:18 +0000 [thread overview]
Message-ID: <sashiko-outbox-220897@kernel.org> (raw)
In-Reply-To: <20261118120714.31505-7-rofikcoga@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Medium] Input: sw42902: unbalanced regulator disable in
sw42902_power_off()
--
commit 11bdb001b9ee56acee9761786c40a8731d5ef9cb
Author: Abdur Rofik <rofikcoga@gmail.com>
Input: touchscreen: add Silicon Works SW42902 support
This commit adds an I2C touchscreen driver for the Silicon Works SW42902
controller, handling regulator power sequencing, reset GPIO control, and
multitouch input reporting.
> diff --git a/drivers/input/touchscreen/sw42902.c b/drivers/input/touchscreen/sw42902.c
> new file mode 100644
> index 0000000000000..a68bd850bf2e2
> --- /dev/null
> +++ b/drivers/input/touchscreen/sw42902.c
[ ... ]
> +static void sw42902_power_off(void *data)
> +{
> + struct sw42902 *ts = data;
> +
> + gpiod_set_value_cansleep(ts->reset, 1);
> + usleep_range(1000, 2000);
> + regulator_bulk_disable(ARRAY_SIZE(ts->supplies), ts->supplies);
> +}
> +
> +static int sw42902_power_on(struct sw42902 *ts)
> +{
> + int error;
> +
> + error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies), ts->supplies);
> + if (error)
> + return error;
[ ... ]
> +static int sw42902_probe(struct i2c_client *client)
> +{
[ ... ]
> + error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->supplies), ts->supplies);
> + if (error)
> + return dev_err_probe(dev, error, "failed to get regulators\n");
> +
> + error = devm_add_action_or_reset(dev, sw42902_power_off, ts);
> + if (error)
> + return error;
> +
> + input = devm_input_allocate_device(dev);
> + if (!input)
> + return -ENOMEM;
[ ... ]
> + error = devm_request_threaded_irq(dev, client->irq, NULL, sw42902_irq,
> + IRQF_ONESHOT | IRQF_NO_AUTOEN,
> + dev_name(dev), ts);
> + if (error)
> + return error;
> +
> + error = sw42902_power_on(ts);
> + if (error)
> + return error;
[Severity: Medium]
Can sw42902_power_off() call regulator_bulk_disable() when ts->supplies
are not enabled?
devm_add_action_or_reset() registers sw42902_power_off() before
sw42902_power_on() enables the regulators, so a failure in
devm_input_allocate_device(), input_mt_init_slots(),
devm_request_threaded_irq(), or regulator_bulk_enable() itself runs
sw42902_power_off() on disabled regulators and triggers an unbalanced
regulator disable warning. The same happens on driver unbind while
suspended or after a failed sw42902_resume(), because sw42902_suspend()
already called sw42902_power_off() and set ts->suspended = true.
Registering the devres action right after sw42902_power_on() succeeds
(and before devm_request_threaded_irq(), so the IRQ is freed before power
is cut on unbind) and skipping sw42902_power_off() when ts->suspended is
set would avoid the unbalanced disables.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261118120714.31505-1-rofikcoga@gmail.com?part=6
next prev parent reply other threads:[~2026-11-18 12:17 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 12:07 [PATCH v2 00/10] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 01/10] dt-bindings: arm: qcom: add LG V60 ThinQ 5G (timelm) Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 02/10] arm64: dts: qcom: add LG V60 ThinQ 5G (timelm) support Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 03/10] dt-bindings: display: panel: add LG SW43103 Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 04/10] drm/panel: add LG SW43103 panel driver Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 05/10] dt-bindings: input: touchscreen: add Silicon Works SW42902 Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 06/10] Input: touchscreen: add Silicon Works SW42902 support Abdur Rofik
2026-11-18 12:17 ` sashiko-bot [this message]
2026-11-18 12:07 ` [PATCH v2 07/10] arm64: dts: qcom: sm8250-lg-timelm: enable SW43103 panel Abdur Rofik
2026-11-18 12:26 ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 08/10] arm64: dts: qcom: sm8250-lg-timelm: add SW42902 touchscreen Abdur Rofik
2026-11-18 12:27 ` sashiko-bot
2026-11-18 12:07 ` [PATCH v2 09/10] arm64: dts: qcom: sm8250-lg-timelm: enable USB Type-C Abdur Rofik
2026-11-18 12:07 ` [PATCH v2 10/10] arm64: dts: qcom: sm8250-lg-timelm: add QCA6390 Bluetooth Abdur Rofik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-220897@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-input@vger.kernel.org \
--cc=robh@kernel.org \
--cc=rofikcoga@gmail.com \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox